Why can’t two series-connected diodes act as a BJT?

I’ve read this before, but I read it again today: Why can’t two series-connected diodes act as a BJT? It has a really good and detailed answer, and also a follow-up.

The first answer above referenced content available for free from here: Modern Semiconductor Devices for Integrated Circuits. The dead tree version is available from Amazon but it costs much more than “free”.

B5819W vs B5819WS

Over on AliExpress I discovered the B5819W and B5819WS Schottky diodes. I read the B5819W datasheet and the B5819WS datasheet but it was hard to pick the difference.

So I asked ChatGPT, you can see that conversation below.

Basically the difference is in packaging size, and also the B5819WS, which is smaller, can operate at a slightly higher temperature.

What’s the difference between B5819W and B5819WS diodes?
B5819W and B5819WS are both Schottky barrier diodes manufactured by STMicroelectronics.

The main difference between the two diodes is their package type. B5819W is available in a SOD-123 package, while B5819WS is available in a SOD-323 package. The SOD-323 package is smaller in size compared to the SOD-123 package, which means that the B5819WS diode may be suitable for applications where board space is limited.

In terms of their electrical specifications, both diodes have a maximum reverse voltage of 40V, a forward voltage drop of 0.38V at 1A, and a maximum forward current of 1A. The main difference between the two diodes is their maximum junction temperature. The B5819W has a maximum junction temperature of 125°C, while the B5819WS has a maximum junction temperature of 150°C.

In summary, the main difference between B5819W and B5819WS diodes is their package type and maximum junction temperature. The electrical specifications of both diodes are largely similar.

If I had to stock only one type of diode, would I stock B5819W or B5819WS?
If you had to stock only one type of diode, whether to stock B5819W or B5819WS would depend on the specific requirements of your application.

If space on the circuit board is not a constraint and the maximum junction temperature of 125°C is sufficient for your application, you may consider stocking B5819W. On the other hand, if board space is limited or if the application requires a higher maximum junction temperature of up to 150°C, you may consider stocking B5819WS.

It is important to note that there may be other diodes available that may better suit the requirements of your application, and it is always recommended to consult the datasheet and application notes to ensure that the diode you choose is suitable for your specific needs.