Difference between revisions of "Hope admin"

From ProgClub
Jump to: navigation, search
(Fixing NFSv4 (nfs4) IDMAP issue)
Line 1: Line 1:
 
This page chronicles the administrative changes to [[Hope|hope.progclub.net]]. If you make an administrative change you should document the change here. Changes are logged he in reverse chronological order with a time-stamp in the form YYYY-MM-DD hh:mm. You can use the time from whatever timezone you are in, or UTC if you're cool, but use 24 hour time. Don't worry if the changes you make have a time-stamp that is less than a time-stamp later in the page, put the latest changes at the top. Put a link to your wiki user account before the time-stamp so we know who's doing what. See the [[Administrative reference]] for other information.
 
This page chronicles the administrative changes to [[Hope|hope.progclub.net]]. If you make an administrative change you should document the change here. Changes are logged he in reverse chronological order with a time-stamp in the form YYYY-MM-DD hh:mm. You can use the time from whatever timezone you are in, or UTC if you're cool, but use 24 hour time. Don't worry if the changes you make have a time-stamp that is less than a time-stamp later in the page, put the latest changes at the top. Put a link to your wiki user account before the time-stamp so we know who's doing what. See the [[Administrative reference]] for other information.
 +
 +
= [[User:John|John]] 2011-11-30 15:54 =
 +
 +
== Web-site goes HTTPS ==
 +
 +
Found [http://www.cyberciti.biz/tips/howto-apache-force-https-secure-connections.html this article] which suggested the following in /etc/apache2/sites-enabled/progclub.mobi
 +
 +
RewriteEngine On
 +
RewriteCond %{HTTPS} off
 +
RewriteRule (.*) https://progclub.mobi%{REQUEST_URI}
 +
 +
This has two benefits. One is that all web requests will be redirected to the secure site, and the second is that all HTTP requests will be redirected to the canonical domain.
 +
 +
Also had to run:
 +
 +
# a2enmod rewrite
  
 
= [[User:John|John]] 2011-11-27 13:42 =
 
= [[User:John|John]] 2011-11-27 13:42 =

Revision as of 14:55, 30 November 2011

This page chronicles the administrative changes to hope.progclub.net. If you make an administrative change you should document the change here. Changes are logged he in reverse chronological order with a time-stamp in the form YYYY-MM-DD hh:mm. You can use the time from whatever timezone you are in, or UTC if you're cool, but use 24 hour time. Don't worry if the changes you make have a time-stamp that is less than a time-stamp later in the page, put the latest changes at the top. Put a link to your wiki user account before the time-stamp so we know who's doing what. See the Administrative reference for other information.

John 2011-11-30 15:54

Web-site goes HTTPS

Found this article which suggested the following in /etc/apache2/sites-enabled/progclub.mobi

RewriteEngine On
RewriteCond %{HTTPS} off
RewriteRule (.*) https://progclub.mobi%{REQUEST_URI}

This has two benefits. One is that all web requests will be redirected to the secure site, and the second is that all HTTP requests will be redirected to the canonical domain.

Also had to run:

# a2enmod rewrite

John 2011-11-27 13:42

Fixing NFSv4 (nfs4) IDMAP issue

See charity admin.

John 2011-09-08 22:19

Installing lsof

root@hope:~/pcad/example/linuxhowtos# apt-cache search lsof
lsof - List open files
alsoft-conf - OpenAL-Soft configuration utility
icecast-server - MPEG Layer III Streaming Server
libapache2-modxslt - XSLT processing module for Apache 2.x based on libxml2
libgnutella-gift - giFT plugin for the Gnutella network
libxslt-ruby - Ruby interface to libxslt
libxslt-ruby1.8 - Ruby interface to libxslt (for Ruby 1.8)
nsis - Nullsoft Scriptable Install System (modified for Debian)
liblsofui4 - Library for ksysguard based priority scheduling
root@hope:~/pcad/example/linuxhowtos# apt-get install lsof
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
  lsof
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 284kB of archives.
After this operation, 463kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu/ lucid/main lsof 4.81.dfsg.1-1build1 [284kB]
Fetched 284kB in 0s (299kB/s)
Selecting previously deselected package lsof.
(Reading database ... 20342 files and directories currently installed.)
Unpacking lsof (from .../lsof_4.81.dfsg.1-1build1_amd64.deb) ...
Processing triggers for man-db ...
Setting up lsof (4.81.dfsg.1-1build1) ...

John 2011-09-08 22:08

Installing telnet

jj5@hope:~/pcad/example/linuxhowtos$ sudo apt-get install telnet
[sudo] password for jj5:
Sorry, try again.
[sudo] password for jj5:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
  telnet
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 72.2kB of archives.
After this operation, 209kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu/ lucid/main telnet 0.17-36build1 [72.2kB]
Fetched 72.2kB in 0s (121kB/s)
Selecting previously deselected package telnet.
(Reading database ... 20331 files and directories currently installed.)
Unpacking telnet (from .../telnet_0.17-36build1_amd64.deb) ...
Processing triggers for man-db ...
Setting up telnet (0.17-36build1) ...
update-alternatives: using /usr/bin/telnet.netkit to provide /usr/bin/telnet (telnet) in auto mode.

Committing to: /etc/
added alternatives/telnet
added alternatives/telnet.1.gz
Committed revision 36.


John 2011-09-08 21:47

Installing gcc

root@hope:~# apt-get install gcc
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  binutils gcc-4.4 libc-dev-bin libc6-dev libgomp1 linux-libc-dev manpages-dev
Suggested packages:
  binutils-doc gcc-multilib autoconf automake1.9 libtool flex bison gdb
  gcc-doc gcc-4.4-multilib libmudflap0-4.4-dev gcc-4.4-doc gcc-4.4-locales
  libgcc1-dbg libgomp1-dbg libmudflap0-dbg libcloog-ppl0 libppl-c2 libppl7
  glibc-doc
The following NEW packages will be installed:
  binutils gcc gcc-4.4 libc-dev-bin libc6-dev libgomp1 linux-libc-dev
  manpages-dev
0 upgraded, 8 newly installed, 0 to remove and 0 not upgraded.
Need to get 9883kB of archives.
After this operation, 35.3MB of additional disk space will be used.
Do you want to continue [Y/n]?
Get:1 http://archive.ubuntu.com/ubuntu/ lucid-updates/main binutils 2.20.1-3ubuntu7.1 [1658kB]
Get:2 http://archive.ubuntu.com/ubuntu/ lucid/main libgomp1 4.4.3-4ubuntu5 [25.5kB]
Get:3 http://archive.ubuntu.com/ubuntu/ lucid/main gcc-4.4 4.4.3-4ubuntu5 [2877kB]
Get:4 http://archive.ubuntu.com/ubuntu/ lucid/main gcc 4:4.4.3-1ubuntu1 [5064B]
Get:5 http://archive.ubuntu.com/ubuntu/ lucid-updates/main libc-dev-bin 2.11.1-0ubuntu7.8 [224kB]
Get:6 http://archive.ubuntu.com/ubuntu/ lucid-updates/main linux-libc-dev 2.6.32-33.72 [841kB]
Get:7 http://archive.ubuntu.com/ubuntu/ lucid-updates/main libc6-dev 2.11.1-0ubuntu7.8 [2706kB]
Get:8 http://archive.ubuntu.com/ubuntu/ lucid/main manpages-dev 3.23-1 [1547kB]
Fetched 9883kB in 49s (202kB/s)
Selecting previously deselected package binutils.
(Reading database ... 17209 files and directories currently installed.)
Unpacking binutils (from .../binutils_2.20.1-3ubuntu7.1_amd64.deb) ...
Selecting previously deselected package libgomp1.
Unpacking libgomp1 (from .../libgomp1_4.4.3-4ubuntu5_amd64.deb) ...
Selecting previously deselected package gcc-4.4.
Unpacking gcc-4.4 (from .../gcc-4.4_4.4.3-4ubuntu5_amd64.deb) ...
Selecting previously deselected package gcc.
Unpacking gcc (from .../gcc_4%3a4.4.3-1ubuntu1_amd64.deb) ...
Selecting previously deselected package libc-dev-bin.
Unpacking libc-dev-bin (from .../libc-dev-bin_2.11.1-0ubuntu7.8_amd64.deb) ...
Selecting previously deselected package linux-libc-dev.
Unpacking linux-libc-dev (from .../linux-libc-dev_2.6.32-33.72_amd64.deb) ...
Selecting previously deselected package libc6-dev.
Unpacking libc6-dev (from .../libc6-dev_2.11.1-0ubuntu7.8_amd64.deb) ...
Selecting previously deselected package manpages-dev.
Unpacking manpages-dev (from .../manpages-dev_3.23-1_all.deb) ...
Processing triggers for man-db ...
Setting up binutils (2.20.1-3ubuntu7.1) ...

Setting up libgomp1 (4.4.3-4ubuntu5) ...

Setting up gcc-4.4 (4.4.3-4ubuntu5) ...
Setting up gcc (4:4.4.3-1ubuntu1) ...

Setting up libc-dev-bin (2.11.1-0ubuntu7.8) ...
Setting up linux-libc-dev (2.6.32-33.72) ...
Setting up libc6-dev (2.11.1-0ubuntu7.8) ...
Setting up manpages-dev (3.23-1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Committing to: /etc/
added alternatives/c89
added alternatives/c89.1.gz
added alternatives/c99
added alternatives/c99.1.gz
added alternatives/cc
added alternatives/cc.1.gz
Committed revision 35.


John 2011-09-02 00:00

Installing pcma

jj5@hope:~# mysql -u root -p
Enter password:
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 17222
Server version: 5.1.41-3ubuntu12.10 (Ubuntu) 

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> create database pcmadb /*!40101 CHARACTER SET utf8 COLLATE utf8_general_ci */;
Query OK, 1 row affected (0.00 sec)

mysql> grant all privileges on pcmadb.* to pcma@'%' identified by 'secret';
Query OK, 0 rows affected (0.16 sec)

mysql> quit
Bye

John 2011-08-19 14:41

Installing fail2ban

jj5@hope:~$ sudo -s
[sudo] password for jj5:
root@hope:~# apt-get install fail2ban
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  whois
Suggested packages:
  python-gamin mailx
The following NEW packages will be installed:
  fail2ban whois
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 129kB of archives.
After this operation, 1032kB of additional disk space will be used.
Do you want to continue [Y/n]?
Get:1 http://archive.ubuntu.com/ubuntu/ lucid/universe fail2ban 0.8.4-1ubuntu1 [96.0kB]
Get:2 http://archive.ubuntu.com/ubuntu/ lucid/main whois 5.0.0ubuntu3 [32.6kB]
Fetched 129kB in 0s (182kB/s)
Selecting previously deselected package fail2ban.
(Reading database ... 17042 files and directories currently installed.)
Unpacking fail2ban (from .../fail2ban_0.8.4-1ubuntu1_all.deb) ...
Selecting previously deselected package whois.
Unpacking whois (from .../whois_5.0.0ubuntu3_amd64.deb) ...
Processing triggers for man-db ...
Processing triggers for ureadahead ...
Setting up fail2ban (0.8.4-1ubuntu1) ... 

Setting up whois (5.0.0ubuntu3) ...
Processing triggers for python-central ...
Committing to: /etc/
added fail2ban
added default/fail2ban
added fail2ban/action.d
added fail2ban/fail2ban.conf
added fail2ban/filter.d
added fail2ban/jail.conf
added fail2ban/action.d/complain.conf
added fail2ban/action.d/dshield.conf
added fail2ban/action.d/hostsdeny.conf
added fail2ban/action.d/ipfilter.conf
added fail2ban/action.d/ipfw.conf
added fail2ban/action.d/iptables-allports.conf
added fail2ban/action.d/iptables-multiport-log.conf
added fail2ban/action.d/iptables-multiport.conf
added fail2ban/action.d/iptables-new.conf
added fail2ban/action.d/iptables.conf
added fail2ban/action.d/mail-buffered.conf
added fail2ban/action.d/mail-whois-lines.conf
added fail2ban/action.d/mail-whois.conf
added fail2ban/action.d/mail.conf
added fail2ban/action.d/mynetwatchman.conf
added fail2ban/action.d/sendmail-buffered.conf
added fail2ban/action.d/sendmail-whois-lines.conf
added fail2ban/action.d/sendmail-whois.conf
added fail2ban/action.d/sendmail.conf
added fail2ban/action.d/shorewall.conf
added fail2ban/filter.d/apache-auth.conf
added fail2ban/filter.d/apache-badbots.conf
added fail2ban/filter.d/apache-nohome.conf
added fail2ban/filter.d/apache-noscript.conf
added fail2ban/filter.d/apache-overflows.conf
added fail2ban/filter.d/common.conf
added fail2ban/filter.d/courierlogin.conf
added fail2ban/filter.d/couriersmtp.conf
added fail2ban/filter.d/cyrus-imap.conf
added fail2ban/filter.d/exim.conf
added fail2ban/filter.d/gssftpd.conf
added fail2ban/filter.d/lighttpd-fastcgi.conf
added fail2ban/filter.d/named-refused.conf
added fail2ban/filter.d/pam-generic.conf
added fail2ban/filter.d/php-url-fopen.conf
added fail2ban/filter.d/postfix.conf
added fail2ban/filter.d/proftpd.conf
added fail2ban/filter.d/pure-ftpd.conf
added fail2ban/filter.d/qmail.conf
added fail2ban/filter.d/sasl.conf
added fail2ban/filter.d/sieve.conf
added fail2ban/filter.d/sshd-ddos.conf
added fail2ban/filter.d/sshd.conf
added fail2ban/filter.d/vsftpd.conf
added fail2ban/filter.d/webmin-auth.conf
added fail2ban/filter.d/wuftpd.conf
added fail2ban/filter.d/xinetd-fail.conf
added init.d/fail2ban
added logrotate.d/fail2ban
added rc0.d/K99fail2ban
added rc1.d/K99fail2ban
added rc2.d/S99fail2ban
added rc3.d/S99fail2ban
added rc4.d/S99fail2ban
added rc5.d/S99fail2ban
added rc6.d/K99fail2ban
Committed revision 28.


John 2011-08-15 04:56

Configuring Apache

Configured to serve content from /home/apache, and members public_html directories.

John 2011-08-15 04:47

Installing Apache, MySQL and PHP

jj5@hope:~$ sudo -s
[sudo] password for jj5:
root@hope:~# apt-get install apache2 mysql-server
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  apache2-mpm-worker apache2-utils apache2.2-bin apache2.2-common libapr1
  libaprutil1 libaprutil1-dbd-sqlite3 libaprutil1-ldap libdbd-mysql-perl
  libdbi-perl libexpat1 libhtml-template-perl libmysqlclient16
  libnet-daemon-perl libplrpc-perl mysql-client-5.1 mysql-client-core-5.1
  mysql-common mysql-server-5.1 mysql-server-core-5.1 psmisc ssl-cert
Suggested packages:
  www-browser apache2-doc apache2-suexec apache2-suexec-custom ufw dbishell
  libipc-sharedcache-perl tinyca mailx
The following NEW packages will be installed:
  apache2 apache2-mpm-worker apache2-utils apache2.2-bin apache2.2-common
  libapr1 libaprutil1 libaprutil1-dbd-sqlite3 libaprutil1-ldap
  libdbd-mysql-perl libdbi-perl libexpat1 libhtml-template-perl
  libmysqlclient16 libnet-daemon-perl libplrpc-perl mysql-client-5.1
  mysql-client-core-5.1 mysql-common mysql-server mysql-server-5.1
  mysql-server-core-5.1 psmisc ssl-cert
0 upgraded, 24 newly installed, 0 to remove and 0 not upgraded.
Need to get 28.0MB of archives.
After this operation, 73.2MB of additional disk space will be used.
Do you want to continue [Y/n]?

...

Setting up libdbd-mysql-perl (4.012-1ubuntu1) ...
Setting up mysql-client-core-5.1 (5.1.41-3ubuntu12) ...
Setting up mysql-client-5.1 (5.1.41-3ubuntu12) ...
Setting up psmisc (22.10-1) ... 

Setting up mysql-server-core-5.1 (5.1.41-3ubuntu12) ...
Setting up mysql-server-5.1 (5.1.41-3ubuntu12) ...
mysql start/running, process 3901

Setting up libexpat1 (2.0.1-7ubuntu1) ...

Setting up libapr1 (1.3.8-1build1) ... 

Setting up libaprutil1 (1.3.9+dfsg-3build1) ... 

Setting up libaprutil1-dbd-sqlite3 (1.3.9+dfsg-3build1) ...
Setting up libaprutil1-ldap (1.3.9+dfsg-3build1) ...
Setting up apache2.2-bin (2.2.14-5ubuntu8) ...
Setting up apache2-utils (2.2.14-5ubuntu8) ...
Setting up apache2.2-common (2.2.14-5ubuntu8) ...
Enabling site default.
Enabling module alias.
Enabling module autoindex.
Enabling module dir.
Enabling module env.
Enabling module mime.
Enabling module negotiation.
Enabling module setenvif.
Enabling module status.
Enabling module auth_basic.
Enabling module deflate.
Enabling module authz_default.
Enabling module authz_user.
Enabling module authz_groupfile.
Enabling module authn_file.
Enabling module authz_host.
Enabling module reqtimeout.

Setting up apache2-mpm-worker (2.2.14-5ubuntu8) ...
 * Starting web server apache2                                           [ OK ]

Setting up apache2 (2.2.14-5ubuntu8) ...

Setting up libhtml-template-perl (2.9-1) ...
Setting up mysql-server (5.1.41-3ubuntu12) ...
Setting up ssl-cert (1.0.23ubuntu2) ...

Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Committing to: /etc/
modified .etckeeper
added apache2
modified group
modified group-
modified gshadow
modified gshadow-
added mysql
modified passwd
modified passwd-
modified shadow
modified shadow-
added apache2/apache2.conf
added apache2/conf.d
added apache2/envvars
added apache2/httpd.conf
added apache2/magic
added apache2/mods-available
added apache2/mods-enabled
added apache2/ports.conf
added apache2/sites-available
added apache2/sites-enabled
added apache2/conf.d/charset
added apache2/conf.d/localized-error-pages
added apache2/conf.d/security
added apache2/mods-available/actions.conf
added apache2/mods-available/actions.load
added apache2/mods-available/alias.conf
added apache2/mods-available/alias.load
added apache2/mods-available/asis.load
added apache2/mods-available/auth_basic.load
added apache2/mods-available/auth_digest.load
added apache2/mods-available/authn_alias.load
added apache2/mods-available/authn_anon.load
added apache2/mods-available/authn_dbd.load
added apache2/mods-available/authn_dbm.load
added apache2/mods-available/authn_default.load
added apache2/mods-available/authn_file.load
added apache2/mods-available/authnz_ldap.load
added apache2/mods-available/authz_dbm.load
added apache2/mods-available/authz_default.load
added apache2/mods-available/authz_groupfile.load
added apache2/mods-available/authz_host.load
added apache2/mods-available/authz_owner.load
added apache2/mods-available/authz_user.load
added apache2/mods-available/autoindex.conf
added apache2/mods-available/autoindex.load
added apache2/mods-available/cache.load
added apache2/mods-available/cern_meta.load
added apache2/mods-available/cgi.load
added apache2/mods-available/cgid.conf
added apache2/mods-available/cgid.load
added apache2/mods-available/charset_lite.load
added apache2/mods-available/dav.load
added apache2/mods-available/dav_fs.conf
added apache2/mods-available/dav_fs.load
added apache2/mods-available/dav_lock.load
added apache2/mods-available/dbd.load
added apache2/mods-available/deflate.conf
added apache2/mods-available/deflate.load
added apache2/mods-available/dir.conf
added apache2/mods-available/dir.load
added apache2/mods-available/disk_cache.conf
added apache2/mods-available/disk_cache.load
added apache2/mods-available/dump_io.load
added apache2/mods-available/env.load
added apache2/mods-available/expires.load
added apache2/mods-available/ext_filter.load
added apache2/mods-available/file_cache.load
added apache2/mods-available/filter.load
added apache2/mods-available/headers.load
added apache2/mods-available/ident.load
added apache2/mods-available/imagemap.load
added apache2/mods-available/include.load
added apache2/mods-available/info.conf
added apache2/mods-available/info.load
added apache2/mods-available/ldap.load
added apache2/mods-available/log_forensic.load
added apache2/mods-available/mem_cache.conf
added apache2/mods-available/mem_cache.load
added apache2/mods-available/mime.conf
added apache2/mods-available/mime.load
added apache2/mods-available/mime_magic.conf
added apache2/mods-available/mime_magic.load
added apache2/mods-available/negotiation.conf
added apache2/mods-available/negotiation.load
added apache2/mods-available/proxy.conf
added apache2/mods-available/proxy.load
added apache2/mods-available/proxy_ajp.load
added apache2/mods-available/proxy_balancer.load
added apache2/mods-available/proxy_connect.load
added apache2/mods-available/proxy_ftp.load
added apache2/mods-available/proxy_http.load
added apache2/mods-available/proxy_scgi.load
added apache2/mods-available/reqtimeout.conf
added apache2/mods-available/reqtimeout.load
added apache2/mods-available/rewrite.load
added apache2/mods-available/setenvif.conf
added apache2/mods-available/setenvif.load
added apache2/mods-available/speling.load
added apache2/mods-available/ssl.conf
added apache2/mods-available/ssl.load
added apache2/mods-available/status.conf
added apache2/mods-available/status.load
added apache2/mods-available/substitute.load
added apache2/mods-available/suexec.load
added apache2/mods-available/unique_id.load
added apache2/mods-available/userdir.conf
added apache2/mods-available/userdir.load
added apache2/mods-available/usertrack.load
added apache2/mods-available/version.load
added apache2/mods-available/vhost_alias.load
added apache2/mods-enabled/alias.conf
added apache2/mods-enabled/alias.load
added apache2/mods-enabled/auth_basic.load
added apache2/mods-enabled/authn_file.load
added apache2/mods-enabled/authz_default.load
added apache2/mods-enabled/authz_groupfile.load
added apache2/mods-enabled/authz_host.load
added apache2/mods-enabled/authz_user.load
added apache2/mods-enabled/autoindex.conf
added apache2/mods-enabled/autoindex.load
added apache2/mods-enabled/cgid.conf
added apache2/mods-enabled/cgid.load
added apache2/mods-enabled/deflate.conf
added apache2/mods-enabled/deflate.load
added apache2/mods-enabled/dir.conf
added apache2/mods-enabled/dir.load
added apache2/mods-enabled/env.load
added apache2/mods-enabled/mime.conf
added apache2/mods-enabled/mime.load
added apache2/mods-enabled/negotiation.conf
added apache2/mods-enabled/negotiation.load
added apache2/mods-enabled/reqtimeout.conf
added apache2/mods-enabled/reqtimeout.load
added apache2/mods-enabled/setenvif.conf
added apache2/mods-enabled/setenvif.load
added apache2/mods-enabled/status.conf
added apache2/mods-enabled/status.load
added apache2/sites-available/default
added apache2/sites-available/default-ssl
added apache2/sites-enabled/000-default
added apparmor.d/usr.sbin.mysqld
added bash_completion.d/apache2.2-common
added cron.daily/apache2
added default/apache2
added init/mysql.conf
added init.d/apache2
added init.d/mysql
added logcheck/ignore.d.paranoid
added logcheck/ignore.d.workstation
added logcheck/ignore.d.paranoid/mysql-server-5_1
added logcheck/ignore.d.server/mysql-server-5_1
added logcheck/ignore.d.workstation/mysql-server-5_1
added logrotate.d/apache2
added logrotate.d/mysql-server
added mysql/conf.d
added mysql/debian-start
added mysql/debian.cnf
added mysql/my.cnf
added mysql/conf.d/mysqld_safe_syslog.cnf
added rc0.d/K09apache2
added rc1.d/K09apache2
added rc2.d/S91apache2
added rc3.d/S91apache2
added rc4.d/S91apache2
added rc5.d/S91apache2
added rc6.d/K09apache2
added ssl/certs/a186bf0f
added ssl/certs/ssl-cert-snakeoil.pem
added ssl/private/ssl-cert-snakeoil.key
added ufw/applications.d/apache2.2-common
Committed revision 25.
root@hope:~# apt-get install php5
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  apache2-mpm-prefork libapache2-mod-php5 php5-common
Suggested packages:
  php-pear php5-suhosin
The following packages will be REMOVED:
  apache2-mpm-worker
The following NEW packages will be installed:
  apache2-mpm-prefork libapache2-mod-php5 php5 php5-common
0 upgraded, 4 newly installed, 1 to remove and 0 not upgraded.
Need to get 3535kB of archives.
After this operation, 9544kB of additional disk space will be used.
Do you want to continue [Y/n]?
Get:1 http://archive.ubuntu.com/ubuntu/ lucid/main apache2-mpm-prefork 2.2.14-5ubuntu8 [2418B]
Get:2 http://archive.ubuntu.com/ubuntu/ lucid/main php5-common 5.3.2-1ubuntu4 [546kB]
Get:3 http://archive.ubuntu.com/ubuntu/ lucid/main libapache2-mod-php5 5.3.2-1ubuntu4 [2985kB]
Get:4 http://archive.ubuntu.com/ubuntu/ lucid/main php5 5.3.2-1ubuntu4 [1110B]
Fetched 3535kB in 2s (1763kB/s)
dpkg: apache2-mpm-worker: dependency problems, but removing anyway as you requested:
 apache2 depends on apache2-mpm-worker (= 2.2.14-5ubuntu8) | apache2-mpm-prefork (= 2.2.14-5ubuntu8) | apache2- mpm-event (= 2.2.14-5ubuntu8) | apache2-mpm-itk (= 2.2.14-5ubuntu8); however:
  Package apache2-mpm-worker is to be removed.
  Package apache2-mpm-prefork is not installed.
  Package apache2-mpm-event is not installed.
  Package apache2-mpm-itk is not installed.
(Reading database ... 16997 files and directories currently installed.)
Removing apache2-mpm-worker ...
 * Stopping web server apache2
 ... waiting  .                                                           [ OK ]
Selecting previously deselected package apache2-mpm-prefork.
(Reading database ... 16989 files and directories currently installed.)
Unpacking apache2-mpm-prefork (from .../apache2-mpm-prefork_2.2.14-5ubuntu8_amd64.deb) ...
Selecting previously deselected package php5-common.
Unpacking php5-common (from .../php5-common_5.3.2-1ubuntu4_amd64.deb) ...
Selecting previously deselected package libapache2-mod-php5.
Unpacking libapache2-mod-php5 (from .../libapache2-mod-php5_5.3.2-1ubuntu4_amd64.deb) ...
Selecting previously deselected package php5.
Unpacking php5 (from .../php5_5.3.2-1ubuntu4_all.deb) ...
Setting up apache2-mpm-prefork (2.2.14-5ubuntu8) ...
 * Starting web server apache2                                           [ OK ] 

Setting up php5-common (5.3.2-1ubuntu4) ...
Setting up libapache2-mod-php5 (5.3.2-1ubuntu4) ...

Creating config file /etc/php5/apache2/php.ini with new version
 * Reloading web server config apache2                                   [ OK ] 

Setting up php5 (5.3.2-1ubuntu4) ...
Committing to: /etc/
added php5
added apache2/mods-available/php5.conf
added apache2/mods-available/php5.load
added apache2/mods-enabled/cgi.load
missing apache2/mods-enabled/cgid.conf
modified apache2/mods-enabled/cgid.conf
missing apache2/mods-enabled/cgid.load
modified apache2/mods-enabled/cgid.load
added apache2/mods-enabled/php5.conf
added apache2/mods-enabled/php5.load
added cron.d/php5
added php5/apache2
added php5/conf.d
added php5/apache2/conf.d
added php5/apache2/php.ini
added php5/conf.d/pdo.ini
Committed revision 26.

John 2011-08-15 01:32

Configuring NFS client

Per these instructions.

root@hope:/# apt-get install nfs-common
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  libevent-1.4-2 libgssglue1 libnfsidmap2 librpcsecgss3 portmap
The following NEW packages will be installed:
  libevent-1.4-2 libgssglue1 libnfsidmap2 librpcsecgss3 nfs-common portmap
0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded.
Need to get 421kB of archives.
After this operation, 1364kB of additional disk space will be used.
Do you want to continue [Y/n]?
Get:1 http://archive.ubuntu.com/ubuntu/ lucid/main libevent-1.4-2 1.4.13-stable-1 [61.4kB]
Get:2 http://archive.ubuntu.com/ubuntu/ lucid/main libgssglue1 0.1-4 [24.4kB]
Get:3 http://archive.ubuntu.com/ubuntu/ lucid/main libnfsidmap2 0.23-2 [32.1kB]
Get:4 http://archive.ubuntu.com/ubuntu/ lucid/main librpcsecgss3 0.19-2 [36.3kB]
Get:5 http://archive.ubuntu.com/ubuntu/ lucid/main portmap 6.0.0-1ubuntu2 [38.2kB]
Get:6 http://archive.ubuntu.com/ubuntu/ lucid/main nfs-common 1:1.2.0-4ubuntu4 [228kB]
Fetched 421kB in 1s (386kB/s)
Preconfiguring packages ...
Selecting previously deselected package libevent-1.4-2.
(Reading database ... 15829 files and directories currently installed.)
Unpacking libevent-1.4-2 (from .../libevent-1.4-2_1.4.13-stable-1_amd64.deb) ...
Selecting previously deselected package libgssglue1.
Unpacking libgssglue1 (from .../libgssglue1_0.1-4_amd64.deb) ...
Selecting previously deselected package libnfsidmap2.
Unpacking libnfsidmap2 (from .../libnfsidmap2_0.23-2_amd64.deb) ...
Selecting previously deselected package librpcsecgss3.
Unpacking librpcsecgss3 (from .../librpcsecgss3_0.19-2_amd64.deb) ...
Selecting previously deselected package portmap.
Unpacking portmap (from .../portmap_6.0.0-1ubuntu2_amd64.deb) ...
Selecting previously deselected package nfs-common.
Unpacking nfs-common (from .../nfs-common_1%3a1.2.0-4ubuntu4_amd64.deb) ...
Processing triggers for man-db ...
Processing triggers for ureadahead ...
Setting up libevent-1.4-2 (1.4.13-stable-1) ...

Setting up libgssglue1 (0.1-4) ...

Setting up libnfsidmap2 (0.23-2) ...

Setting up librpcsecgss3 (0.19-2) ...

Setting up portmap (6.0.0-1ubuntu2) ...
portmap start/running, process 2830

Setting up nfs-common (1:1.2.0-4ubuntu4) ... 

Creating config file /etc/idmapd.conf with new version 

Creating config file /etc/default/nfs-common with new version
Adding system user `statd' (UID 104) ...
Adding new user `statd' (UID 104) with group `nogroup' ...
Not creating home directory `/var/lib/nfs'.
statd start/running, process 3046
gssd stop/pre-start, process 3071
idmapd stop/pre-start, process 3099

Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Committing to: /etc/
added gssapi_mech.conf
added idmapd.conf
modified passwd
modified passwd-
modified shadow
modified shadow-
added default/nfs-common
added default/portmap
added init/gssd.conf
added init/idmapd.conf
added init/portmap.conf
added init/rpc_pipefs.conf
added init/statd.conf
added init.d/gssd
added init.d/idmapd
added init.d/portmap
added init.d/rpc_pipefs
added init.d/statd
Committed revision 23.
jj5@hope:/home$ cat /etc/fstab
proc            /proc       proc    defaults    0 0
/dev/sda1       /           ext3    defaults,errors=remount-ro,noatime    0 1
/dev/sda2       none        swap    sw          0 0
172.19.1.45:/home /home     nfs4    rw,_netdev,auto 0 0
root@hope:~# cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
nfs
jj5@hope:/home$ cat /etc/rc.local
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

#sleep 5
#modprobe nfs
#mount /home 

exit 0
root@hope:~# vim /etc/default/nfs-common
root@hope:~# cat /etc/default/nfs-common
# If you do not set values for the NEED_ options, they will be attempted
# autodetected; this should be sufficient for most people. Valid alternatives
# for the NEED_ options are "yes" and "no".

# Do you want to start the statd daemon? It is not needed for NFSv4.
NEED_STATD=

# Options for rpc.statd.
#   Should rpc.statd listen on a specific port? This is especially useful
#   when you have a port-based firewall. To use a fixed port, set this
#   this variable to a statd argument like: "--port 4000 --outgoing-port 4001".
#   For more information, see rpc.statd(8) or http://wiki.debian.org/?SecuringNFS
STATDOPTS=

# Do you want to start the idmapd daemon? It is only needed for NFSv4.
NEED_IDMAPD=yes

# Do you want to start the gssd daemon? It is required for Kerberos mounts.
NEED_GSSD=

John 2011-08-15 01:07

Installing sshfs

Per these notes.

jj5@hope:~$ sudo -s
[sudo] password for jj5:
root@hope:~# apt-get install sshfs
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  fuse-utils libfuse2
The following NEW packages will be installed:
  fuse-utils libfuse2 sshfs
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 214kB of archives.
After this operation, 725kB of additional disk space will be used.
Do you want to continue [Y/n]?
Get:1 http://archive.ubuntu.com/ubuntu/ lucid/main libfuse2 2.8.1-1.1ubuntu2 [146kB]
Get:2 http://archive.ubuntu.com/ubuntu/ lucid/main fuse-utils 2.8.1-1.1ubuntu2 [23.7kB]
Get:3 http://archive.ubuntu.com/ubuntu/ lucid/main sshfs 2.2-1build1 [43.7kB]
Fetched 214kB in 0s (260kB/s)
Committing to: /etc/
modified pam.d/common-password
Committed revision 21.
Selecting previously deselected package libfuse2.
(Reading database ... 15788 files and directories currently installed.)
Unpacking libfuse2 (from .../libfuse2_2.8.1-1.1ubuntu2_amd64.deb) ...
Selecting previously deselected package fuse-utils.
Unpacking fuse-utils (from .../fuse-utils_2.8.1-1.1ubuntu2_amd64.deb) ...
Selecting previously deselected package sshfs.
Unpacking sshfs (from .../sshfs_2.2-1build1_amd64.deb) ...
Processing triggers for man-db ...
Setting up libfuse2 (2.8.1-1.1ubuntu2) ...

Setting up fuse-utils (2.8.1-1.1ubuntu2) ...
creating fuse group...
Adding group `fuse' (GID 106) ...
Done.
udev active, skipping device node creation.
update-initramfs: deferring update (trigger activated)

Setting up sshfs (2.2-1build1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Processing triggers for initramfs-tools ...
Committing to: /etc/
modified .etckeeper
added fuse.conf
modified group
modified group-
modified gshadow
modified gshadow-
Committed revision 22.

John 2011-08-14 22:42

Fixing passwd update problem

Was receiving the following error when running passwd:

Current Kerberos password:
passwd: Authentication token manipulation error
passwd: password unchanged

The same problem as reported here. To fix I changed /etc/pam.d/common-password from from:

password       requisite                       pam_krb5.so minimum_uid=1000
password       [success=1 default=ignore]      pam_unix.so obscure use_authtok try_first_pass sha512
password       requisite                       pam_deny.so
password       required                        pam_permit.so

to:

password   sufficient   pam_krb5.so minimum_uid=1000
password   required     pam_unix.so obscure try_first_pass sha512

John 2011-08-14 17:23

Configuring Kerberos client

Per these instructions.

jj5@hope:~$ sudo -s
[sudo] password for jj5:
root@hope:~# apt-get install krb5-user krb5-config libpam-krb5
Reading package lists... Done
Building dependency tree
Reading state information... Done
krb5-user is already the newest version.
krb5-config is already the newest version.
krb5-config set to manually installed.
The following NEW packages will be installed:
  libpam-krb5
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 73.8kB of archives.
After this operation, 193kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu/ lucid/main libpam-krb5 4.2-1 [73.8kB]
Fetched 73.8kB in 0s (107kB/s)
Selecting previously deselected package libpam-krb5.
(Reading database ... 15717 files and directories currently installed.)
Unpacking libpam-krb5 (from .../libpam-krb5_4.2-1_amd64.deb) ...
Processing triggers for man-db ...
Setting up libpam-krb5 (4.2-1) ...

Committing to: /etc/
modified pam.d/common-account
modified pam.d/common-auth
modified pam.d/common-password
modified pam.d/common-session
modified pam.d/common-session-noninteractive
Committed revision 16.
root@hope:~# hostname -f
hope
root@hope:~# vim /etc/hosts
root@hope:~# cat /etc/hosts
127.0.0.1     localhost localhost.localdomain
67.207.130.204     hope.progclub.net hope
root@hope:~# hostname -f
hope.progclub.net
root@hope:~# kadmin
Authenticating as principal root/admin@PROGCLUB.ORG with password.
kadmin: Client not found in Kerberos database while initializing kadmin interface
root@hope:~# kadmin -u jj5/admin
kadmin: invalid option -- 'u'
Usage: kadmin [-r realm] [-p principal] [-q query] [clnt|local args]
        clnt args: [-s admin_server[:port]] [[-c ccache]|[-k [-t keytab]]]|[-n]
        local args: [-x db_args]* [-d dbname] [-e "enc:salt ..."] [-m]
where,
        [-x db_args]* - any number of database specific arguments.
                        Look at each database documentation for supported arguments
root@hope:~# kadmin -p jj5/admin
Authenticating as principal jj5/admin with password.
Password for jj5/admin@PROGCLUB.ORG:
kadmin:  addprinc -randkey host/hope.progclub.net@PROGCLUB.ORG
WARNING: no policy specified for host/hope.progclub.net@PROGCLUB.ORG; defaulting to no policy
add_principal: Principal or policy already exists while creating "host/hope.progclub.net@PROGCLUB.ORG".
kadmin:  ktadd -k ~/hope.keytab host/hope.progclub.net@PROGCLUB.ORG
kadmin: No such file or directory while adding key to keytab
kadmin:  quit
root@hope:~# ls
ipsec-tools.conf
root@hope:~# kadmin -p jj5/admin
kadmin:  ktadd ~/hope.keytab host/hope.progclub.net@PROGCLUB.ORG
kadmin: Principal ~/hope.keytab does not exist.
Entry for principal host/hope.progclub.net@PROGCLUB.ORG with kvno 4, encryption type AES-256 CTS mode with 96-bit SHA-1 HMAC added to keytab WRFILE:/etc/krb5.keytab.
Entry for principal host/hope.progclub.net@PROGCLUB.ORG with kvno 4, encryption type ArcFour with HMAC/md5 added to keytab WRFILE:/etc/krb5.keytab.
Entry for principal host/hope.progclub.net@PROGCLUB.ORG with kvno 4, encryption type Triple DES cbc mode with HMAC/sha1 added to keytab WRFILE:/etc/krb5.keytab.
Entry for principal host/hope.progclub.net@PROGCLUB.ORG with kvno 4, encryption type DES cbc mode with CRC-32 added to keytab WRFILE:/etc/krb5.keytab.
kadmin: quit
root@hope:~# cd /etc
root@hope:/etc# ll kr*
-rw-r--r-- 1 root root 3504 Aug  4 13:43 krb5.conf
-rw------- 1 root root  314 Aug 14 07:32 krb5.keytab
root@hope:/etc# apt-get install libnss-ldapd libsasl2-modules-gssapi-mit kstart
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  libpam-ldapd nscd nslcd
The following NEW packages will be installed:
  kstart libnss-ldapd libpam-ldapd libsasl2-modules-gssapi-mit nscd nslcd
0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded.
Need to get 531kB of archives.
After this operation, 1311kB of additional disk space will be used.
Do you want to continue [Y/n]?


Package configuration


  ┌─────────────────────────┤ Configuring NSLCD ├──────────────────────────┐
  │ Please enter the Uniform Resource Identifier of the LDAP server. The   │
  │ format is 'ldap://<hostname_or_IP_address>:<port>/'. Alternatively,    │
  │ 'ldaps://' or 'ldapi://' can be used. The port number is optional.     │
  │                                                                        │
  │ When using an ldap or ldaps scheme it is recommended to use an IP      │
  │ address to avoid failures when domain name services are unavailable.   │
  │                                                                        │
  │ Multiple URIs can be be specified by separating them with spaces.      │
  │                                                                        │
  │ LDAP server URI:                                                       │
  │                                                                        │
  │ ldaps://charity.progclub.org/_________________________________________ │
  │                                                                        │
  │                   <Ok>                       <Cancel>                  │
  │                                                                        │
  └────────────────────────────────────────────────────────────────────────┘
Package configuration




┌───────────────────────────┤ Configuring NSLCD ├───────────────────────────┐
│ Please enter the distinguished name of the LDAP search base. Many sites   │
│ use the components of their domain names for this purpose. For example,   │
│ the domain "example.net" would use "dc=example,dc=net" as the             │
│ distinguished name of the search base.                                    │
│                                                                           │
│ LDAP server search base:                                                  │
│                                                                           │
│ dc=progclub,dc=org_______________________________________________________ │
│                                                                           │
│                    <Ok>                        <Cancel>                   │
│                                                                           │
└───────────────────────────────────────────────────────────────────────────┘
Package configuration


┌───────────────────────────┤ Configuring NSLCD ├───────────────────────────┐
│                                                                           │
│ When an encrypted connection is used, a server certificate can be         │
│ requested and checked. Please choose whether lookups should be            │
│ configured to require a certificate, and whether certificates should be   │
│ checked for validity:                                                     │
│  * never: no certificate will be requested or checked;                    │
│  * allow: a certificate will be requested, but it is not                  │
│           required or checked;                                            │
│  * try: a certificate will be requested and checked, but if no            │
│         certificate is provided it is ignored;                            │
│  * demand: a certificate will be requested, required, and checked.        │
│ If certificate checking is enabled, at least one of the tls_cacertdir or  │
│ tls_cacertfile options must be put in /etc/nslcd.conf.                    │
│                                                                           │
│                                  <Ok>                                     │
│                                                                           │
└───────────────────────────────────────────────────────────────────────────┘

Package configuration



                     ┌──────┤ Configuring NSLCD ├───────┐
                     │ Check server's SSL certificate:  │
                     │                                  │
                     │              never               │
                     │            * allow               │
                     │              try                 │
                     │              demand              │
                     │                                  │
                     │                                  │
                     │      <Ok>          <Cancel>      │
                     │                                  │
                     └──────────────────────────────────┘
Package configuration

┌───────────────────────┤ Configuring libnss-ldapd ├────────────────────────┐
│ For this package to work, you need to modify your /etc/nsswitch.conf to   │
│ use the ldap datasource.                                                  │
│                                                                           │
│ You can select the services that should have LDAP lookups enabled. The    │
│ new LDAP lookups will be added as the last datasource. Be sure to review  │
│ these changes.                                                            │
│                                                                           │
│ Name services to configure:                                               │
│                                                                           │
│    [*] aliases                                                            │
│    [*] ethers                                                             │
│    [*] group                                                              │
│    [*] hosts                                                              │
│    [*] netgroup                                                           │
│    [*] networks                                                           │
│    [*] passwd                                                             │
│    [*] protocols                                                          │
│    [*] rpc                                                                │
│    [*] services                                                           │
│    [*] shadow                                                             │
│                                                                           │
│                                  <Ok>                                     │
│                                                                           │
└───────────────────────────────────────────────────────────────────────────┘
Get:1 http://archive.ubuntu.com/ubuntu/ lucid/universe kstart 3.16-3 [58.3kB]
Get:2 http://archive.ubuntu.com/ubuntu/ lucid/universe libsasl2-modules-gssapi-mit 2.1.23.dfsg1-5ubuntu1 [73.1kB]
Get:3 http://archive.ubuntu.com/ubuntu/ lucid/universe nscd 2.11.1-0ubuntu7 [211kB]
Get:4 http://archive.ubuntu.com/ubuntu/ lucid/universe nslcd 0.7.2 [120kB]
Get:5 http://archive.ubuntu.com/ubuntu/ lucid/universe libnss-ldapd 0.7.2 [41.8kB]
Get:6 http://archive.ubuntu.com/ubuntu/ lucid/universe libpam-ldapd 0.7.2 [27.6kB]
Fetched 531kB in 1s (494kB/s)
Committing to: /etc/
modified .etckeeper
modified hosts
added krb5.keytab
Committed revision 17.
Preconfiguring packages ...
Selecting previously deselected package kstart.
(Reading database ... 15728 files and directories currently installed.)
Unpacking kstart (from .../kstart_3.16-3_amd64.deb) ...
Selecting previously deselected package libsasl2-modules-gssapi-mit.
Unpacking libsasl2-modules-gssapi-mit (from .../libsasl2-modules-gssapi-mit_2.1.23.dfsg1-5ubuntu1_amd64.deb) ...
Selecting previously deselected package nscd.
Unpacking nscd (from .../nscd_2.11.1-0ubuntu7_amd64.deb) ...
Selecting previously deselected package nslcd.
Unpacking nslcd (from .../archives/nslcd_0.7.2_amd64.deb) ...
Selecting previously deselected package libnss-ldapd.
Unpacking libnss-ldapd (from .../libnss-ldapd_0.7.2_amd64.deb) ...
Selecting previously deselected package libpam-ldapd.
Unpacking libpam-ldapd (from .../libpam-ldapd_0.7.2_amd64.deb) ...
Processing triggers for man-db ...
Processing triggers for ureadahead ...
Setting up kstart (3.16-3) ...
Setting up libsasl2-modules-gssapi-mit (2.1.23.dfsg1-5ubuntu1) ...
Setting up nscd (2.11.1-0ubuntu7) ...
* Starting Name Service Cache Daemon nscd                               [ OK ] 

Setting up nslcd (0.7.2) ...
Warning: The home dir /var/run/nslcd/ you specified can't be accessed: No such file or directory
Adding system user `nslcd' (UID 103) ...
Adding new group `nslcd' (GID 105) ...
Adding new user `nslcd' (UID 103) with group `nslcd' ...
Not creating home directory `/var/run/nslcd/'.
* Starting LDAP connection daemon nslcd                                 [ OK ]

Setting up libnss-ldapd (0.7.2) ...
/etc/nsswitch.conf: enable LDAP lookups for aliases
/etc/nsswitch.conf: enable LDAP lookups for ethers
/etc/nsswitch.conf: enable LDAP lookups for group
/etc/nsswitch.conf: enable LDAP lookups for hosts
/etc/nsswitch.conf: enable LDAP lookups for netgroup
/etc/nsswitch.conf: enable LDAP lookups for networks
/etc/nsswitch.conf: enable LDAP lookups for passwd
/etc/nsswitch.conf: enable LDAP lookups for protocols
/etc/nsswitch.conf: enable LDAP lookups for rpc
/etc/nsswitch.conf: enable LDAP lookups for services
/etc/nsswitch.conf: enable LDAP lookups for shadow
 * Restarting Name Service Cache Daemon nscd                             [ OK ]

Setting up libpam-ldapd (0.7.2) ... 

Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Committing to: /etc/
modified .etckeeper
modified group
modified group-
modified gshadow
modified gshadow-
added nscd.conf
added nslcd.conf
modified nsswitch.conf
modified passwd
modified passwd-
modified shadow
modified shadow-
added init.d/nscd
added init.d/nslcd
modified pam.d/common-account
modified pam.d/common-auth
modified pam.d/common-password
modified pam.d/common-session
modified pam.d/common-session-noninteractive
added rc0.d/K20nscd
added rc0.d/K20nslcd
added rc1.d/K20nscd
added rc1.d/K20nslcd
added rc2.d/S20nscd
added rc2.d/S20nslcd
added rc3.d/S20nscd
added rc3.d/S20nslcd
added rc4.d/S20nscd
added rc4.d/S20nslcd
added rc5.d/S20nscd
added rc5.d/S20nslcd
added rc6.d/K20nscd
added rc6.d/K20nslcd
Committed revision 18.
root@hope:/etc# cat /etc/nsswitch.conf
# /etc/nsswitch.conf
#
# Example configuration of GNU Name Service Switch functionality.
# If you have the `glibc-doc-reference' and `info' packages installed, try:
# `info libc "Name Service Switch"' for information about this file.

passwd:         compat ldap
group:          compat ldap
shadow:         compat ldap

hosts:          files dns ldap
networks:       files ldap

protocols:      db files ldap
services:       db files ldap
ethers:         db files ldap
rpc:            db files ldap

netgroup:       nis ldap
aliases:        ldap
root@hope:/etc# cat /etc/nslcd.conf
# /etc/nslcd.conf
# nslcd configuration file. See nslcd.conf(5)
# for details.

# The user and group nslcd should run as.
uid nslcd
gid nslcd

# The location at which the LDAP server(s) should be reachable.
uri ldaps://charity.progclub.org/

# The search base that will be used for all queries.
base dc=progclub,dc=org

# The LDAP protocol version to use.
#ldap_version 3

# The DN to bind with for normal lookups.
#binddn cn=annonymous,dc=example,dc=net
#bindpw secret

# SSL options
#ssl off
tls_reqcert allow

# The search scope.
#scope sub
root@hope:/etc# vim /etc/nslcd.conf
# JE: 2011-08-14: https://help.ubuntu.com/community/SingleSignOn#Client%20Configuration
sasl_mech GSSAPI
# JE: 2011-08-14: the documentation said to add the following line, but it causes errors
#                 so I removed it. I'm not sure what it's for. Seems to work ok without it.
#krb5_ccname FILE:/tmp/host.tkt
root@hope:/etc# pam-auth-update
Package configuration

┌───────────────────────────────────┤  ├────────────────────────────────────┐
│ Pluggable Authentication Modules (PAM) determine how authentication,      │
│ authorization, and password changing are handled on the system, as well   │
│ as allowing configuration of additional actions to take when starting     │
│ user sessions.                                                            │
│                                                                           │
│ Some PAM module packages provide profiles that can be used to             │
│ automatically adjust the behavior of all PAM-using applications on the    │
│ system.  Please indicate which of these behaviors you wish to enable.     │
│                                                                           │
│ PAM profiles to enable:                                                   │
│                                                                           │
│    [*] Kerberos authentication                                            │
│    [*] Unix authentication                                                │
│    [ ] LDAP Authentication                                                │
│                                                                           │
│                                                                           │
│                    <Ok>                        <Cancel>                   │
│                                                                           │
└───────────────────────────────────────────────────────────────────────────┘
root@hope:/etc# service nslcd restart
 * Restarting LDAP connection daemon nslcd
 nslcd: /etc/nslcd.conf:30:  option sasl_mech is currently not fully supported (please report any successes)
 nslcd: /etc/nslcd.conf:31: error accessing /tmp/host.tkt: No such file or directory
                                                                        [fail]
root@hope:/etc# touch /tmp/host.tkt
root@hope:/etc# service nslcd restart
 * Restarting LDAP connection daemon nslcd
 nslcd: /etc/nslcd.conf:30: option sasl_mech is currently not fully supported (please report any successes)
                                                                        [ OK ]
root@hope:~# vim /etc/passwd
root@hope:~# etckeeper commit "Removed jj5 from /etc/passwd"
Committing to: /etc/
modified nslcd.conf
modified passwd
modified pam.d/common-account
modified pam.d/common-auth
modified pam.d/common-password
modified pam.d/common-session
modified pam.d/common-session-noninteractive
Committed revision 19.

John 2011-08-05 16:59

Disabling IPSec

Can't get IPSec to work. Commented out /etc/network/if-up.d/ip and removed the policies from /etc/ipsec-tools.conf.

John 2011-08-04 23:38

Installing Kerberos client

jj5@hope:~$ sudo -s
[sudo] password for jj5:
root@hope:~# apt-get install krb5-user krb5-config
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  bind9-host geoip-database libbind9-60 libdns64 libgeoip1 libgssrpc4 libisc60
  libisccc60 libisccfg60 libkadm5clnt-mit7 liblwres60
Suggested packages:
  geoip-bin krb5-doc
The following NEW packages will be installed:
  bind9-host geoip-database krb5-config krb5-user libbind9-60 libdns64
  libgeoip1 libgssrpc4 libisc60 libisccc60 libisccfg60 libkadm5clnt-mit7
  liblwres60
0 upgraded, 13 newly installed, 0 to remove and 0 not upgraded.
Need to get 2161kB of archives.
After this operation, 5325kB of additional disk space will be used.
Do you want to continue [Y/n]?
Get:1 http://archive.ubuntu.com/ubuntu/ lucid/main libgeoip1 1.4.6.dfsg-17 [109kB]
Get:2 http://archive.ubuntu.com/ubuntu/ lucid/main libisc60 1:9.7.0.dfsg.P1-1 [169kB]
Get:3 http://archive.ubuntu.com/ubuntu/ lucid/main libdns64 1:9.7.0.dfsg.P1-1 [690kB]
Get:4 http://archive.ubuntu.com/ubuntu/ lucid/main libisccc60 1:9.7.0.dfsg.P1-1 [29.4kB]
Get:5 http://archive.ubuntu.com/ubuntu/ lucid/main libisccfg60 1:9.7.0.dfsg.P1-1 [52.6kB]
Get:6 http://archive.ubuntu.com/ubuntu/ lucid/main libbind9-60 1:9.7.0.dfsg.P1-1 [34.1kB]
Get:7 http://archive.ubuntu.com/ubuntu/ lucid/main liblwres60 1:9.7.0.dfsg.P1-1 [47.9kB]
Get:8 http://archive.ubuntu.com/ubuntu/ lucid/main bind9-host 1:9.7.0.dfsg.P1-1 [68.2kB]
Get:9 http://archive.ubuntu.com/ubuntu/ lucid/main geoip-database 1.4.6.dfsg-17 [658kB]
Get:10 http://archive.ubuntu.com/ubuntu/ lucid/main krb5-config 2.2 [23.0kB]
Get:11 http://archive.ubuntu.com/ubuntu/ lucid/main libgssrpc4 1.8.1+dfsg-2 [81.4kB]
Get:12 http://archive.ubuntu.com/ubuntu/ lucid/main libkadm5clnt-mit7 1.8.1+dfsg-2 [62.0kB]
Get:13 http://archive.ubuntu.com/ubuntu/ lucid/main krb5-user 1.8.1+dfsg-2 [137kB]
Fetched 2161kB in 2s (891kB/s)
Preconfiguring packages ...
Selecting previously deselected package libgeoip1.
(Reading database ... 15611 files and directories currently installed.)
Unpacking libgeoip1 (from .../libgeoip1_1.4.6.dfsg-17_amd64.deb) ...
Selecting previously deselected package libisc60.
Unpacking libisc60 (from .../libisc60_1%3a9.7.0.dfsg.P1-1_amd64.deb) ...
Selecting previously deselected package libdns64.
Unpacking libdns64 (from .../libdns64_1%3a9.7.0.dfsg.P1-1_amd64.deb) ...
Selecting previously deselected package libisccc60.
Unpacking libisccc60 (from .../libisccc60_1%3a9.7.0.dfsg.P1-1_amd64.deb) ...
Selecting previously deselected package libisccfg60.
Unpacking libisccfg60 (from .../libisccfg60_1%3a9.7.0.dfsg.P1-1_amd64.deb) ...
Selecting previously deselected package libbind9-60.
Unpacking libbind9-60 (from .../libbind9-60_1%3a9.7.0.dfsg.P1-1_amd64.deb) ...
Selecting previously deselected package liblwres60.
Unpacking liblwres60 (from .../liblwres60_1%3a9.7.0.dfsg.P1-1_amd64.deb) ...
Selecting previously deselected package bind9-host.
Unpacking bind9-host (from .../bind9-host_1%3a9.7.0.dfsg.P1-1_amd64.deb) ...
Selecting previously deselected package geoip-database.
Unpacking geoip-database (from .../geoip-database_1.4.6.dfsg-17_all.deb) ...
Selecting previously deselected package krb5-config.
Unpacking krb5-config (from .../krb5-config_2.2_all.deb) ...
Selecting previously deselected package libgssrpc4.
Unpacking libgssrpc4 (from .../libgssrpc4_1.8.1+dfsg-2_amd64.deb) ...
Selecting previously deselected package libkadm5clnt-mit7.
Unpacking libkadm5clnt-mit7 (from .../libkadm5clnt-mit7_1.8.1+dfsg-2_amd64.deb) ...
Selecting previously deselected package krb5-user.
Unpacking krb5-user (from .../krb5-user_1.8.1+dfsg-2_amd64.deb) ...
Processing triggers for man-db ...
Setting up libgeoip1 (1.4.6.dfsg-17) ...

Setting up libisc60 (1:9.7.0.dfsg.P1-1) ...

Setting up libdns64 (1:9.7.0.dfsg.P1-1) ...

Setting up libisccc60 (1:9.7.0.dfsg.P1-1) ...

Setting up libisccfg60 (1:9.7.0.dfsg.P1-1) ...

Setting up libbind9-60 (1:9.7.0.dfsg.P1-1) ...

Setting up liblwres60 (1:9.7.0.dfsg.P1-1) ...

Setting up bind9-host (1:9.7.0.dfsg.P1-1) ...
Setting up geoip-database (1.4.6.dfsg-17) ...
Setting up krb5-config (2.2) ...

Setting up libgssrpc4 (1.8.1+dfsg-2) ...

Setting up libkadm5clnt-mit7 (1.8.1+dfsg-2) ...

Setting up krb5-user (1.8.1+dfsg-2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Committing to: /etc/
added krb5.conf
Committed revision 13.
Package configuration



┌──────────────────┤ Configuring Kerberos Authentication ├──────────────────┐
│ When users attempt to use Kerberos and specify a principal or user name   │
│ without specifying what administrative Kerberos realm that principal      │
│ belongs to, the system appends the default realm.  The default realm may  │
│ also be used as the realm of a Kerberos service running on the local      │
│ machine.  Often, the default realm is the uppercase version of the local  │
│ DNS domain.                                                               │
│                                                                           │
│ Default Kerberos version 5 realm:                                         │
│                                                                           │
│ PROGCLUB.ORG_____________________________________________________________ │
│                                                                           │
│                                  <Ok>                                     │
│                                                                           │
└───────────────────────────────────────────────────────────────────────────┘
Package configuration





  ┌────────────────┤ Configuring Kerberos Authentication ├─────────────────┐
  │ Enter the hostnames of Kerberos servers in the PROGCLUB.ORG Kerberos   │
  │ realm separated by spaces.                                             │
  │                                                                        │
  │ Kerberos servers for your realm:                                       │
  │                                                                        │
  │ kerberos.progclub.org_________________________________________________ │
  │                                                                        │
  │                                 <Ok>                                   │
  │                                                                        │
  └────────────────────────────────────────────────────────────────────────┘
Package configuration





┌──────────────────┤ Configuring Kerberos Authentication ├──────────────────┐
│ Enter the hostname of the administrative (password changing) server for   │
│ the PROGCLUB.ORG Kerberos realm.                                          │
│                                                                           │
│ Administrative server for your Kerberos realm:                            │
│                                                                           │
│ kerberos.progclub.org____________________________________________________ │
│                                                                           │
│                                  <Ok>                                     │
│                                                                           │
└───────────────────────────────────────────────────────────────────────────┘

John 2011-07-30 18:05

Configuring IPSec

jj5@hope:~$ sudo -s
[sudo] password for jj5:
root@hope:~# apt-get install racoon
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
  racoon
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/433kB of archives.
After this operation, 1217kB of additional disk space will be used.
Committing to: /etc/
modified ipsec-tools.conf
modified ipsec-tools.conf.bak
added iptables.up.rules
Committed revision 10.
Preconfiguring packages ...
Selecting previously deselected package racoon.
(Reading database ... 15611 files and directories currently installed.)
Unpacking racoon (from .../racoon_1%3a0.7.1-1.6ubuntu1_amd64.deb) ...
Processing triggers for man-db ...
Processing triggers for ureadahead ...
Setting up racoon (1:0.7.1-1.6ubuntu1) ...
Starting IKE (ISAKMP/Oakley) server: racoon.
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
root@hope:~# cd /etc/network/if-pre-up.d/
root@hope:/etc/network/if-pre-up.d# ll
total 12
drwxr-xr-x 2 root root 4096 Apr 22  2010 ./
drwxr-xr-x 6 root root 4096 Apr 22  2010 ../
-rwxr-xr-x 1 root root  348 Dec 21  2009 ethtool*
root@hope:/etc/network/if-pre-up.d# vim iptables
#!/bin/sh
/sbin/iptables-restore < /etc/iptables.up.rules
root@hope:/etc/network/if-pre-up.d# vim ip
#!/bin/sh
# Charity
ip route add 67.207.128.184 dev eth0 advmss 200
# Honesty
ip route add 67.207.129.103 dev eth0 advmss 200
root@hope:/etc/network/if-pre-up.d# chmod +x iptables ip
root@hope:/etc/network/if-pre-up.d# ll
total 20
drwxr-xr-x 2 root root 4096 Jul 30 08:11 ./
drwxr-xr-x 6 root root 4096 Apr 22  2010 ../
-rwxr-xr-x 1 root root  348 Dec 21  2009 ethtool*
-rwxr-xr-x 1 root root  126 Jul 30 08:11 ip*
-rwxr-xr-x 1 root root   58 Jul 30 08:09 iptables*
root@hope:/etc/network/if-pre-up.d# cd /etc
root@hope:/etc# vim iptables.up.rules
*filter
#  Allow all loopback (lo0) traffic
-A INPUT -i lo -j ACCEPT
# Drop all traffic to 127/8 that does use lo0
-A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT
#  Accept all established inbound connections
-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
#  Allow all outbound traffic
-A OUTPUT -j ACCEPT
# Allow HTTP and HTTPS connections from anywhere
-A INPUT -p tcp --dport 80 -j ACCEPT
-A INPUT -p tcp --dport 443 -j ACCEPT
#  Allow SSH connections
-A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT
# Accept anything from charity
-A INPUT -s 67.207.128.184 -j ACCEPT
# Accept anything from honesty
-A INPUT -s 67.207.129.103 -j ACCEPT
# Allow MySQL connections from John's house
-A INPUT -s 60.240.67.126/32 -p tcp -m tcp --dport 3306 -j ACCEPT
# Allow MySQL connections from localhost
-A INPUT -s 127.0.0.1/32 -p tcp -m tcp --dport 3306 -j ACCEPT
# Allow ping
-A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT
# log iptables denied calls
-A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7
#-A INPUT -j LOG --log-prefix "iptables debug: " --log-level 7
# Reject all other inbound - default deny unless explicitly allowed policy
-A INPUT -j REJECT
-A FORWARD -j REJECT
COMMIT
root@hope:/etc# vim ipsec-tools.conf
# Hope/Charity security policy
spdadd 67.207.130.204 67.207.128.184 any -P out ipsec
       esp/transport//require
       ah/transport//require;
spdadd 67.207.128.184 67.207.130.204 any -P in ipsec
       esp/transport//require
       ah/transport//require;
# Hope/Honesty security policy
spdadd 67.207.130.204 67.207.129.103 any -P out ipsec
       esp/transport//require
       ah/transport//require;
spdadd 67.207.129.103 67.207.130.204 any -P in ipsec
       esp/transport//require
       ah/transport//require;
root@hope:/etc# vim racoon/psk.txt
# Charity
67.207.128.184 <secret>
# Honesty
67.207.129.103 <secret>
root@hope:/etc# ll racoon/psk.txt
-rw------- 1 root root 95 Jul 30 08:21 racoon/psk.txt
root@hope:/etc# vim racoon/racoon.conf
path pre_shared_key "/etc/racoon/psk.txt";
path certificate "/etc/racoon/certs";
remote anonymous {
       exchange_mode main,aggressive;
       proposal {
               encryption_algorithm aes;
               hash_algorithm sha1;
               authentication_method pre_shared_key;
               dh_group modp1024;
       }
       generate_policy off;
}
sainfo anonymous {
       pfs_group modp768;
       encryption_algorithm aes;
       authentication_algorithm hmac_sha1;
       compression_algorithm deflate;
}
#log debug2;
root@hope:/etc# vim racoon/racoon.conf
root@hope:/etc# /etc/init.d/racoon stop
Stopping IKE (ISAKMP/Oakley) server: racoon.
root@hope:/etc# /etc/init.d/setkey restart
Reloading IPsec SA/SP database: done.
root@hope:/etc# /etc/init.d/racoon start
Starting IKE (ISAKMP/Oakley) server: racoon.
root@hope:/etc# etckeeper commit "Configured IPSec"
Committing to: /etc/
modified ipsec-tools.conf
modified iptables.up.rules
added network/if-pre-up.d/ip
added network/if-pre-up.d/iptables
modified racoon/psk.txt
modified racoon/racoon.conf
Committed revision 11.
root@hope:/etc# /etc/network/if-pre-up.d/ip
RTNETLINK answers: File exists

That ought to do it!

...it didn't do it.

root@hope:~# apt-get remove racoon
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be REMOVED:
  racoon
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
After this operation, 1217kB disk space will be freed.
Do you want to continue [Y/n]?
(Reading database ... 15675 files and directories currently installed.)
Removing racoon ...
Stopping IKE (ISAKMP/Oakley) server: racoon.
Processing triggers for ureadahead ...
Processing triggers for man-db ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
root@hope:~# dd if=/dev/random count=24 bs=1| xxd -ps
root@hope:~# dd if=/dev/random count=24 bs=1| xxd -ps
root@hope:~# dd if=/dev/random count=20 bs=1| xxd -ps
root@hope:~# dd if=/dev/random count=20 bs=1| xxd -ps
root@hope:~# vim /etc/ipsec-tools.conf
#!/usr/sbin/setkey -f
# Flush the SAD and SPD
flush;
spdflush;
# Charity/Hope configuration
# ESP SAs using 192 bit long keys (168 + 24 parity)
add 67.207.128.184 67.207.130.204 esp 1 -E aes-cbc
        0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef;
add 67.207.130.204 67.207.128.184 esp 2 -E aes-cbc
        0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef;
# AH SAs using 160 bit long keys
add 67.207.128.184 67.207.130.204 ah 3 -A hmac-sha1
        0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef;
add 67.207.130.204 67.207.128.184 ah 4 -A hmac-sha1
        0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef;
# Security policies
spdadd 67.207.130.204 67.207.128.184 any -P out ipsec
        esp/transport//require
        ah/transport//require;
spdadd 67.207.128.184 67.207.130.204 any -P in ipsec
        esp/transport//require
        ah/transport//require;
# Hope/Honesty configuration
# ESP SAs using 192 bit long keys (168 + 24 parity)
add 67.207.130.204 67.207.129.103 esp 9 -E aes-cbc
        0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef;
add 67.207.129.103 67.207.130.204 esp 10 -E aes-cbc
        0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef;
# AH SAs using 160 bit long keys
add 67.207.130.204 67.207.129.103 ah 11 -A hmac-sha1
        0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef;
add 67.207.129.103 67.207.130.204 ah 12 -A hmac-sha1
        0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef;
# Security policies
spdadd 67.207.130.204 67.207.129.103 any -P out ipsec
        esp/transport//require
        ah/transport//require;
spdadd 67.207.129.103 67.207.130.204 any -P in ipsec
        esp/transport//require
        ah/transport//require;
root@hope:~# /etc/init.d/setkey restart
Reloading IPsec SA/SP database: done.
root@hope:~# cd /etc/network
root@hope:/etc/network# ls
if-down.d  if-post-down.d  if-pre-up.d  if-up.d  interfaces
root@hope:/etc/network# mv if-pre-up.d/ip if-up.d/
root@hope:/etc/network# if-up.d/ip
root@hope:/etc# etckeeper commit "Configured IPSec"
Committing to: /etc/
modified ipsec-tools.conf
missing network/if-pre-up.d/ip
modified network/if-pre-up.d/ip
added network/if-up.d/ip
Committed revision 12.

The other end of the connections have been configured on charity and honesty.

Works!

John 2011-07-30 09:45

Configuring racoon

See the Charity Admin section for the other half of the configuration.

# vim /etc/racoon/psk.txt
# Charity
67.207.128.184 <secret>
# vim /etc/racoon/racoon.conf
remote 67.207.128.184 {
       exchange_mode main,aggressive;
       proposal {
               encryption_algorithm 3des;
               hash_algorithm sha1;
               authentication_method pre_shared_key;
               dh_group modp1024;
       }
       generate_policy off;
}
sainfo address 67.207.128.184[any] any address 67.207.128.184/32[any] any {
       pfs_group modp768;
       encryption_algorithm 3des;
       authentication_algorithm hmac_md5;
       compression_algorithm deflate;
}
# vim /etc/ipsec-tools.conf
# Security policies
spdadd 67.207.128.184 67.207.130.204 any -P in ipsec
       esp/transport//require
       ah/transport//require;
spdadd 67.207.130.204 67.207.128.184 any -P out ipsec
       esp/transport//require
       ah/transport//require;
root@hope:/etc/racoon# /etc/init.d/racoon stop
Stopping IKE (ISAKMP/Oakley) server: racoon.
root@hope:/etc/racoon# /etc/init.d/setkey restart
Reloading IPsec SA/SP database: done.
root@hope:/etc/racoon# /etc/init.d/racoon start
Starting IKE (ISAKMP/Oakley) server: racoon.

John 2011-07-30 01:49

Adding user jj5

I had hoped to have LDAP and SSO operational before adding users to the any user machines, but it looks like there's nothing for it. Debuggin IPSec is a pain, and I need to login to hope all the time, and I'm sick of typing in the long random root password.

root@hope:~# adduser jj5
Adding user `jj5' ...
Adding new group `jj5' (1000) ...
Adding new user `jj5' (1000) with group `jj5' ...
Creating home directory `/home/jj5' ...
Copying files from `/etc/skel' ...
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
Changing the user information for jj5
Enter the new value, or press ENTER for the default
        Full Name []: John Elliot
        Room Number []:
        Work Phone []:
        Home Phone []:
        Other []:
Is the information correct? [Y/n]
root@hope:~# gpasswd -a jj5 sudo
Adding user jj5 to group sudo

John 2011-07-30 00:04

Installing racoon

Having some trouble with IPSec, going to try using racoon.

root@hope:/etc# apt-get install racoon
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
  racoon
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 433kB of archives.
After this operation, 1217kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu/ lucid/main racoon 1:0.7.1-1.6ubuntu1 [433kB]
Fetched 433kB in 1s (377kB/s)
Committing to: /etc/
modified .etckeeper
modified ipsec-tools.conf
added ipsec-tools.conf.bak
Committed revision 7.
Preconfiguring packages ...
Selecting previously deselected package racoon.
(Reading database ... 15606 files and directories currently installed.)
Unpacking racoon (from .../racoon_1%3a0.7.1-1.6ubuntu1_amd64.deb) ...
Processing triggers for man-db ...
Processing triggers for ureadahead ...
Setting up racoon (1:0.7.1-1.6ubuntu1) ...
Generating /etc/default/racoon...
Starting IKE (ISAKMP/Oakley) server: racoon.
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Committing to: /etc/
modified .etckeeper
added racoon
added default/racoon
added init.d/racoon
added racoon/psk.txt
added racoon/racoon-tool.conf
added racoon/racoon.conf
added rc1.d/K89racoon
added rcS.d/S40racoon
Committed revision 8.

The install prompted for Package configuration information, and I choose the 'direct' configuration method (the default) over 'racoon-tool', the other option.

 ┌──────────────────────────┤ Configuring racoon ├──────────────────────────┐
 │ Racoon can be configured two ways, either by directly editing            │
 │ /etc/racoon/racoon.conf or using the racoon-tool administrative front    │
 │ end. racoon-tool is now deprecated and is only available for backward    │
 │ compatibility. New installations should always use the "direct" method.  │
 │                                                                          │
 │ Configuration mode for racoon IKE daemon.                                │
 │                                                                          │
 │                               direct                                     │
 │                               racoon-tool                                │
 │                                                                          │
 │                                                                          │
 │                                  <Ok>                                    │
 │                                                                          │
 └──────────────────────────────────────────────────────────────────────────┘

John 2011-07-29 00:13

Installing IPSec

# apt-get install ipsec-tools
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
  ipsec-tools
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 111kB of archives.
After this operation, 274kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu/ lucid/main ipsec-tools 1:0.7.1-1.6ubuntu1 [111kB]
Fetched 111kB in 0s (157kB/s)
Selecting previously deselected package ipsec-tools.
(Reading database ... 15571 files and directories currently installed.)
Unpacking ipsec-tools (from .../ipsec-tools_1%3a0.7.1-1.6ubuntu1_amd64.deb) ...
Processing triggers for man-db ...
Processing triggers for ureadahead ...
Setting up ipsec-tools (1:0.7.1-1.6ubuntu1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Committing to: /etc/
modified .etckeeper
added ipsec-tools.conf
added default/setkey
added init.d/setkey
added rcS.d/S37setkey
Committed revision 2.
# vim /etc/ipsec-tools.conf
#!/usr/sbin/setkey -f
# NOTE: Do not use this file if you use racoon with racoon-tool
# utility. racoon-tool will setup SAs and SPDs automatically using
# /etc/racoon/racoon-tool.conf configuration.
#
# Flush the SAD and SPD
flush;
spdflush;
# AH SAs using 128 bit long keys
add 67.207.128.184 67.207.130.204 ah 0x200 -A hmac-md5
        0x<ah_1>;
add 67.207.130.204 67.207.128.184 ah 0x300 -A hmac-md5
        0x<ah_2>;
# ESP SAs using 192 bit long keys (168 + 24 parity)
add 67.207.128.184 67.207.130.204 esp 0x201 -E 3des-cbc
        0x<esp_1>;
add 67.207.130.204 67.207.128.184 esp 0x301 -E 3des-cbc
        0x<esp_2>;
# Security policies
spdadd 67.207.128.184 67.207.130.204 any -P in ipsec
        esp/transport//require
        ah/transport//require;
spdadd 67.207.130.204 67.207.128.184 any -P out ipsec
        esp/transport//require
        ah/transport//require;
# sudo chmod 750 /etc/ipsec-tools.conf
# sudo /etc/init.d/setkey start
* Loading IPsec SA/SP database from /etc/ipsec-tools.conf:              [ OK ]
$ sudo etckeeper commit "Configured IPSec between charity and hope"
Committing to: /etc/
modified .etckeeper
modified ipsec-tools.conf
Committed revision 3.

Done!

John 2011-07-29 00:12

Installing Etckeeper

Per the instructions,

# apt-get install etckeeper

That was it. The output was too extensive to report here.

John 2011-07-25 19:41

The hope.progclub.org slice has has been created, and the host added to to the DNS zones, but apart from that it's not configured presently.