Difference between revisions of "John's Linux page"

From ProgClub
Jump to: navigation, search
(102 intermediate revisions by the same user not shown)
Line 2: Line 2:
  
 
Note: I have some other disorganised notes on [http://www.jj5.net/sixsigma/UNIX UNIX], which include a few tips for MacOS. I also have some tips for [http://www.jj5.net/sixsigma/OS_X OS X].
 
Note: I have some other disorganised notes on [http://www.jj5.net/sixsigma/UNIX UNIX], which include a few tips for MacOS. I also have some tips for [http://www.jj5.net/sixsigma/OS_X OS X].
 +
 +
Note: the info on this page is probably Ubuntu (and Debian as an outside chance) specific, because I use Ubuntu pretty much everywhere these days.
 +
 +
You might also be interested in [[John's hacks]].
 +
 +
Quick jump to: [[#NetBeans|NetBeans]].
 +
 +
= References =
 +
 +
== Command-line ==
 +
 +
See [https://zaiste.net/posts/shell-commands-rust/ Shell Commands I Wish I Knew Earlier] for some interesting options.
  
 
= System =
 
= System =
 +
 +
== Reporting system specifications from the command-line ==
 +
 +
Try any of these:
 +
 +
# neofetch
 +
# inxi
 +
# hwinfo --short
 +
 +
You may need to install the relevant package.
  
 
== Determining which Debian/Ubuntu release your are running ==
 
== Determining which Debian/Ubuntu release your are running ==
Line 13: Line 35:
 
  $ lsb_release
 
  $ lsb_release
  
== Determining which Unix you are running ==
+
== Determining which Linux/Unix you are running ==
  
 
  $ uname
 
  $ uname
 +
 +
Or,
 +
 +
$ uname -mrs
  
 
Or,
 
Or,
  
 
  $ uname -a
 
  $ uname -a
 +
 +
== Determining which Linux kernel you are running ==
 +
 +
$ uname -r
  
 
== Configuring system swappiness ==
 
== Configuring system swappiness ==
Line 36: Line 66:
  
 
  # lshw
 
  # lshw
 
And for CPUs:
 
 
# lscpu
 
  
 
And for PCI devices:
 
And for PCI devices:
Line 48: Line 74:
  
 
  # dmidecode
 
  # dmidecode
 +
 +
Note that the dmidecode command (above) will give you information about your system's motherboard. For motherboard info look for 'System Information' and/or 'Base Board Information'.
  
 
Or the grand daddy of them all:
 
Or the grand daddy of them all:
Line 71: Line 99:
 
  Info:      Processes: 355 Uptime: 11 days Memory: 21198.3/32043.3MB Client: Shell (bash) inxi: 2.3.5
 
  Info:      Processes: 355 Uptime: 11 days Memory: 21198.3/32043.3MB Client: Shell (bash) inxi: 2.3.5
  
= Environment =
+
=== Motherboard info ===
 +
 
 +
# dmidecode -t 2
  
== Configuring vim as your editor ==
+
=== CPU info ===
  
Sometimes all you need is:
+
# lscpu
  
$ export EDITOR=/usr/bin/vim
+
or:
  
Which works for svn, for example. Add it to your ~/.profile file to have it set for all login sessions.
+
# cat /proc/cpuinfo
  
Other times you need to run
+
=== RAM info ===
  
  # update-alternatives --config editor
+
  # dmidecode --type memory
  
And then select vim from the list. This is what you do to configure your visudo editor.
+
=== PCI info ===
  
== Configuring your locale ==
+
# lspci -v
  
$ sudo /usr/sbin/locale-gen en_AU.UTF-8
+
=== Drive info ===
$ sudo /usr/sbin/update-locale LANG=en_AU.UTF-8
 
  
= User and group management =
+
# cat /proc/partitions
  
== Adding a user ==
+
and:
  
To add a new user on a linux system:
+
# hdparm -I /dev/sda
  
# useradd username
+
and:
# passwd username
 
  
To have the home directory created from '/etc/skel' use the 'adduser' script instead:
+
# smartctl --info /dev/sda
  
# adduser username
+
You can check if a drive is SSD or not with:
  
== Adding a user to a group ==
+
# cat /sys/block/sde/queue/rotational
  
To add an existing user to an existing group:
+
0=SSD
 +
1=HDD
  
# gpasswd -a username group
+
== Viewing syslog and other logs with KSystemLog ==
  
e.g. to add user 'jj5' to the 'sudo' group:
+
Run the 'KSystemLog' program under KDE for a handy log viewer GUI.
  
# gpasswd -a jj5 sudo
+
= CPU =
  
Alternatively you can use adduser, passing the username and group:
+
== Monitoring CPU clock speed ==
  
# adduser username group
+
Try something like this:
  
e.g. to add user 'sclaughl' to the 'staff' group:
+
$ watch 'grep MHz /proc/cpuinfo | awk "{ print \$4 }" | sort -n'
  
# adduser sclaughl staff
+
= Power =
  
== Disabling a user account ==
+
== Reporting on PowerShield DEFENDER UPS status ==
  
You can disable a user account with:
+
Before running `upsc` ensure service is running:
  
  # passwd -l user
+
  # upsdrvctl start
  
Note: that's a lower-case L, not a one.
+
To see the status of the [https://powershield.com.au/powersheild_product/defender/ PowerShield DEFENDER] systems on John's LAN:
  
== Enabling a disabled user account ==
+
$ upsc defender
  
To can re-enable a locked user account with:
+
E.g.:
  
  # passwd -u user
+
  jj5@orac:~$ upsc defender
 +
Init SSL without certificate database
 +
battery.charge: 100
 +
battery.voltage: 27.40
 +
battery.voltage.high: 26.00
 +
battery.voltage.low: 20.80
 +
battery.voltage.nominal: 24.0
 +
device.type: ups
 +
driver.name: blazer_usb
 +
driver.parameter.pollinterval: 2
 +
driver.parameter.port: auto
 +
driver.parameter.synchronous: no
 +
driver.version: 2.7.4
 +
driver.version.internal: 0.12
 +
input.current.nominal: 5.0
 +
input.frequency: 50.1
 +
input.frequency.nominal: 50
 +
input.voltage: 242.6
 +
input.voltage.fault: 242.6
 +
input.voltage.nominal: 240
 +
output.voltage: 242.6
 +
ups.beeper.status: disabled
 +
ups.delay.shutdown: 30
 +
ups.delay.start: 180
 +
ups.load: 14
 +
ups.productid: 5161
 +
ups.status: OL
 +
ups.type: offline / line interactive
 +
ups.vendorid: 0665
  
== Finding which user you are logged in as ==
+
== Run commands on PowerShield DEFENDER UPS batteries ==
  
To determine which user you are running as enter the command:
+
You can run "instant commands" using the '''upscmd''' command.
  
$ whoami
+
We use the 'beeper.toggle' instant command in our Salt Stack config to disable the beeper, see e.g.:
  
== Finding which groups you are a member of ==
+
diligence:/srv/salt/conf/app/defender-1200.sls
  
To find which groups you are a member of:
+
To see "instant commands" supported by the PowerShield DEFENDER:
  
  $ groups
+
  $ upscmd -l defender
  
or
+
E.g.:
  
  $ groups username
+
  jj5@orac:~$ upscmd -l defender
 +
Instant commands supported on UPS [defender]:
 +
 +
beeper.toggle - Toggle the UPS beeper
 +
load.off - Turn off the load immediately
 +
load.on - Turn on the load immediately
 +
shutdown.return - Turn off the load and return when power is back
 +
shutdown.stayoff - Turn off the load and remain off
 +
shutdown.stop - Stop a shutdown in progress
 +
test.battery.start - Start a battery test
 +
test.battery.start.deep - Start a deep battery test
 +
test.battery.start.quick - Start a quick battery test
 +
test.battery.stop - Stop the battery test
  
Where 'username' is the username of the user you are querying, e.g.:
+
= Service management =
  
$ groups jj5
+
== Report running services ==
  
== Finding who else is logged in to the system ==
+
# service --status-all
  
To see who else is logged in,
+
= Environment =
  
$ who
+
== Configuring vim as your editor ==
  
== Running a command as a particular user ==
+
Sometimes all you need is:
  
To run "svn update" as the user www-data:
+
$ export EDITOR=/usr/bin/vim
  
$ sudo su -c "svn update" www-data
+
Which works for svn, for example. Add it to your ~/.profile file to have it set for all login sessions.
  
= Memory management =
+
Other times you need to run
  
== Checking available memory ==
+
# update-alternatives --config editor
  
To report memory statistics in megabytes:
+
And then select vim from the list. This is what you do to configure your visudo editor.
  
$ free -m
+
== Configuring your locale ==
  
= Video/display management =
+
$ sudo /usr/sbin/locale-gen en_AU.UTF-8
 +
$ sudo /usr/sbin/update-locale LANG=en_AU.UTF-8
  
== Viewing EDID data for attached monitor ==
+
= User and group management =
  
To view [https://en.wikipedia.org/wiki/Extended_Display_Identification_Data EDID] data for an attached monitor (requires the [https://packages.debian.org/stable/main/edid-decode edid-decode] package):
+
== Adding a user ==
  
$ cd /sys/class/drm
+
To add a new user on a linux system:
$ ls
 
$ cd card0-HDMI-A-1
 
$ edid-decode edid
 
  
= Process management =
+
# useradd username
 +
# passwd username
  
== Using 'top' for dynamic resource usage reporting ==
+
To have the home directory created from '/etc/skel' use the 'adduser' script instead:
  
To run top:
+
# adduser username
  
$ top
+
== Adding a user to a group ==
  
See [https://www.thegeekstuff.com/2010/01/15-practical-unix-linux-top-command-examples/ 15 Practical Linux Top Command Examples] for some hints on usage.
+
To add an existing user to an existing group:
  
To see usage for a specific user run e.g.:
+
# gpasswd -a username group
  
$ top -u jj5
+
e.g. to add user 'jj5' to the 'sudo' group:
  
To see full command-line press 'c'.
+
# gpasswd -a jj5 sudo
  
When you're in 'top' you can:
+
Alternatively you can use adduser, passing the username and group:
  
* press '1' (one) to toggle CPU aggregation
+
# adduser username group
* press < and > to change the sort column
 
== Changing memory reporting in 'top' ==
 
  
To run top:
+
e.g. to add user 'sclaughl' to the 'staff' group:
  
  $ top
+
  # adduser sclaughl staff
  
Press 'E' to switch between top memory units (KiB, MiB, GiB, etc.)
+
== Disabling a user account ==
  
Press 'e' to switch between bottom memory units (KiB, MiB, GiB, etc.)
+
You can disable a user account with:
  
Press 'M' to sort by memory utilisation.
+
# passwd -l user
  
Press 'm' to switch between various display modes.
+
Note: that's a lower-case L, not a one.
  
= Disk management =
+
== Enabling a disabled user account ==
  
== Listing disk drives ==
+
To can re-enable a locked user account with:
  
  # fdisk -l
+
  # passwd -u user
  
(That's an L for "list")
+
== Finding which user you are logged in as ==
  
== Checking available disk space ==
+
To determine which user you are running as enter the command:
  
  $ df -h
+
  $ whoami
  
== Getting disk information ==
+
== Finding which groups you are a member of ==
  
  # lsblk
+
To find which groups you are a member of:
 +
 
 +
  $ groups
 +
 
 +
or
  
And
+
$ groups username
  
# cat /proc/partitions
+
Where 'username' is the username of the user you are querying, e.g.:
  
Or the Grand Daddy of them all:
+
$ groups jj5
  
# lshw -class disk
+
== Finding who else is logged in to the system ==
  
(Requires the lshw package.)
+
To see who else is logged in,
  
== Getting partition UUID and file-system type ==
+
$ who
  
# blkid
+
== Running a command as a particular user ==
  
== Checking for SSD vs magnetic disk ==
+
To run "svn update" as the user www-data:
  
  # cat /sys/block/sda/queue/rotational
+
  $ sudo su -c "svn update" www-data
  
Will be 0 for SSD and 1 for magnetic.
+
== Reporting user and group info for the current user ==
  
== Monitoring a ZFS server ==
+
$ id
  
So some commands I run to keep an eye on my new ZFS servers:
+
= Memory management =
  
# top
+
== Checking available memory ==
# iotop
 
# nethogs
 
# watch free -h
 
# watch slabtop -o
 
# slabtop
 
# watch cat /proc/meminfo
 
# perf top
 
# watch "df -h | grep -v -e tmpfs -e udev -e by-uuid"
 
# watch zpool iostat -v
 
# zpool iostat -v 2
 
# watch 'zpool list; echo; zfs list'
 
# watch zfs get compressratio -o all
 
# watch cat /proc/spl/kstat/zfs/arcstats
 
  
If you have a scrub or resilvering in progress you can report on progress with:
+
To report memory statistics in megabytes:
  
  # watch zpool status -v
+
  $ free -m
  
You can poke about in internals, e.g.:
+
== Check for swap thrashing ==
  
# cat /proc/spl/kstat/zfs/arcstats
+
Check your virtual memory status with vmstat:
  
  root@orac:/sys/module/zfs/parameters# tail *
+
  $ vmstat
  
You can report on property values with e.g.:
+
== Report memory type ==
  
# zfs get all data
+
Report on RAM DIMMs:
  
If you want to get funky:
+
# dmidecode --type 17
  
# cd /tmp
+
Report on RAM and CPU cache (including L1, L2, and L3):
# perf record -ag #(Ctrl+C after ~15 seconds)
 
# perf report --stdio
 
  
You can search for ZFS files like e.g. this:
+
# lshw -short -C memory
  
root@orac:/# find / -name '*zfs*' -or -name '*zpool*'
+
Or for more detail:
  
You can report history of a zpool:
+
# lshw -C memory
  
# zpool history $poolname
+
= Video/display management =
  
You can get a report on the dedup tables:
+
== Viewing EDID data for attached monitor ==
  
# zpool status -D $poolname
+
To view [https://en.wikipedia.org/wiki/Extended_Display_Identification_Data EDID] data for an attached monitor (requires the [https://packages.debian.org/stable/main/edid-decode edid-decode] package):
  
Or more detailed dedup table info:
+
$ cd /sys/class/drm
 +
$ ls
 +
$ cd card0-HDMI-A-1
 +
$ edid-decode edid
  
# zdb -DDD $poolname
+
= Process management =
  
Note in the output see [https://unix.stackexchange.com/a/405700 here] for details, basically:
+
== Using 'top' for dynamic resource usage reporting ==
  
{|class="wikitable"
+
To run top:
! Abbr  !! Description
 
|-
 
| LSIZE  || logical size (in memory)
 
|-
 
| PSIZE  || physical size
 
|-
 
| DSIZE  || size on disk
 
|-
 
| refcnt || reference count
 
|}
 
  
== Measure data throughput ==
+
$ top
  
Use the 'pv' command from the 'pv' package, e.g.:
+
See [https://www.thegeekstuff.com/2010/01/15-practical-unix-linux-top-command-examples/ 15 Practical Linux Top Command Examples] for some hints on usage.
  
# cat /dev/sda | pv | cat > /dev/null
+
To see usage for a specific user run e.g.:
  
Or for ZFS:
+
$ top -u jj5
  
# zfs send data/example | pv | cat > /dev/null
+
To see full command-line press 'c'.
  
== Using Smartctl, Smartd and Hddtemp on Debian ==
+
When you're in 'top' you can:
  
For notes on using smartctl see [https://www.lisenet.com/2014/using-smartctl-smartd-and-hddtemp-on-debian/ Using Smartctl, Smartd and Hddtemp on Debian].
+
* press '1' (one) to toggle CPU aggregation
 +
* press < and > to change the sort column
  
== Report hard disk usage ==
+
== Changing memory reporting in 'top' ==
  
So you might want to know how much data a process reads or writes to a hard disk. You can monitor process total disk utilisation with the 'iotop' command. Run 'iotop' and then press 'a' for --accumulated.
+
To run top:
  
== Report hard disk temperatures ==
+
$ top
  
E.g.
+
Press 'E' to switch between top memory units (KiB, MiB, GiB, etc.)
  
# hddtemp /dev/sd[a-e]
+
Press 'e' to switch between bottom memory units (KiB, MiB, GiB, etc.)
  
= Monitoring disk I/O =
+
Press 'M' to sort by memory utilisation.
  
There's an app for that! iotop.
+
Press 'm' to switch between various display modes.
  
== Using iotop, top for disks ==
+
== Showing full command-line in 'top' ==
  
# iotop -oPa
+
To see the full command-line for processes run with -c:
  
== Monitor disk I/O for performance issues ==
+
$ top -c
  
# watch iostat
+
== Listing all processes currently running which were started in your current shell session ==
  
Or e.g.
+
$ ps -fl
  
# watch iostat -xd /dev/sd[abc]
+
== Killing specific processes ==
  
= Monitoring a system =
+
# ps aux | grep -e "this\|that" | grep -v grep | tr -s " " | cut -d " " -f 2 | xargs kill -9
  
== Simple ZFS monitoring ==
+
== Run a command for a specified time using timeout ==
  
  # watch iostat
+
  $ timeout 3 ping jj5.net
# iotop
 
# zpool iostat -v 5
 
# watch 'hddtemp /dev/sd[a-e];echo;zpool list; echo; zfs list'
 
# nethogs
 
# top
 
  
= File management =
+
= Disk management =
  
== Listing only directories ==
+
== Reporting ext4 file-systems mounted without noatime ==
  
  $ ls -l | egrep '^d'
+
  $ cat /proc/mounts | grep ext | grep -v noatime | sort
  
== Listing only files ==
+
== Creating a partition table ==
  
  $ ls -l | egrep -v '^d'
+
  # parted /dev/xvdf
  
== Listing hidden files ==
+
mktable msdos
  
$ ls -al .[!.]*
+
== Creating a partition ==
  
== Creating a symbolic link ==
+
# parted /dev/xvdf
  
  $ ln -s /path/to/target link-name
+
  u MiB
 +
mkpart primary 1 100%
  
== Creating a hard-link ==
+
== Creating an ext4 file-system ==
  
  $ ln /path/to/target file-name
+
  # mkfs.ext4 /dev/xvdf1
  
== Changing the owner of a file ==
+
== Listing disk drives ==
  
  $ chown user:group <files>
+
  # fdisk -l
  
E.g.
+
(That's an L for "list")
  
$ chown jj5:staff README
+
== Checking available disk space ==
$ chown root:root *
 
  
To apply recursively into sub-directories use -R,
+
$ df -h
  
  $ chown -R root:root /etc/*
+
== Getting disk information ==
 +
 
 +
  # lsblk
 +
 
 +
And
  
== Changing file permissions ==
+
# cat /proc/partitions
  
{|class="wikitable"
+
Or the Grand Daddy of them all:
|+ Object codes
 
! User !! Group !! Other
 
|-
 
| u    || g    || o
 
|}
 
  
{|class="wikitable"
+
# lshw -class disk
|+ Permission codes
 
! Read !! Write !! Exectue
 
|-
 
| r    || w    || x
 
|-
 
| 4    || 2    || 1
 
|}
 
  
{|class="wikitable"
+
(Requires the lshw package.)
|+ Numeric codes
 
! 0
 
| None
 
|-
 
! 1
 
| Execute
 
|-
 
! 2
 
| Write
 
|-
 
! 3
 
| Write, Execute
 
|-
 
! 4
 
| Read
 
|-
 
! 5
 
| Read, Execute
 
|-
 
! 6
 
| Read, Write
 
|-
 
! 7
 
| Read, Write, Execute
 
|}
 
  
See [http://catcode.com/teachmod/numeric2.html Numeric Mode in Action].
+
== Getting partition UUID and file-system type ==
  
  $ chmod <user numeric code><group numeric code><other numeric code> <files>
+
  # blkid
$ chmod <object codes>+|-<permission codes> <files>
 
  
E.g.
+
== Checking for SSD vs magnetic disk ==
  
  $ chmod 600 my-private-file
+
  # cat /sys/block/sda/queue/rotational
$ chmod go-rwx my-private-file
 
$ chmod u+rw my-private-file
 
$ chmod +x my-script
 
  
== Updating config files ==
+
Will be 0 for SSD and 1 for magnetic.
  
If you get given a new config file called new.conf and you want to integrate it with your old config file old.conf then:
+
== Monitoring a ZFS server ==
  
$ cp old.conf updated.conf
+
So some commands I run to keep an eye on my new ZFS servers:
$ merge -A updated.conf new.conf old.conf
 
  
Then go through and edit updated.conf resolving all the merge errors, picking and choosing what to update and what to keep. When you're done copy updated.conf to old.conf so it becomes the new config file.
+
# top
 +
# iotop
 +
# nethogs
 +
# watch free -h
 +
# watch slabtop -o
 +
# slabtop
 +
# watch cat /proc/meminfo
 +
# perf top
 +
# watch "df -h | grep -v -e tmpfs -e udev -e by-uuid"
 +
# watch zpool iostat -v
 +
# zpool iostat -v 2
 +
# watch 'zpool list; echo; zfs list'
 +
# watch zfs get compressratio -o all
 +
# watch cat /proc/spl/kstat/zfs/arcstats
  
The merge program is a part of the RCS package. If you don't have it:
+
If you have a scrub or resilvering in progress you can report on progress with:
  
  $ sudo apt-get install rcs
+
  # watch zpool status -v
  
== Listing open files ==
+
You can poke about in internals, e.g.:
  
Use lsof to list open files. E.g.:
+
# cat /proc/spl/kstat/zfs/arcstats
  
  # lsof
+
  root@orac:/sys/module/zfs/parameters# tail *
  
See man lsof for options.
+
You can report on property values with e.g.:
  
== List permissions on a whole directory path ==
+
# zfs get all data
  
E.g.:
+
If you want to get funky:
  
  $ namei -om /home/jj5/workspace
+
  # cd /tmp
 +
# perf record -ag #(Ctrl+C after ~15 seconds)
 +
# perf report --stdio
  
Outputs:
+
You can search for ZFS files like e.g. this:
  
  f: /home/jj5/workspace/
+
  root@orac:/# find / -name '*zfs*' -or -name '*zpool*'
  drwxr-xr-x root root /
 
  drwxr-xr-x root root home
 
  drwxr-xr-x jj5  jj5  jj5
 
  drwxr-xr-x jj5  jj5  workspace
 
  
== Counting non-blank lines in a file ==
+
You can report history of a zpool:
  
E.g.:
+
# zpool history $poolname
  
$ cat foo.c | sed '/^\s*$/d' | wc -l
+
You can get a report on the dedup tables:
  
== Cloning one directory to another with rsync ==
+
# zpool status -D $poolname
  
E.g.:
+
Or more detailed dedup table info:
  
rsync --acls --xattrs --stats --human-readable --recursive --del --force --times --links --hard-links --executability --numeric-ids --owner --group --perms --sparse --compress-level=0 /data/source/ hostname:/data/target/
+
# zdb -DDD $poolname
  
== Counting number of files in current directory and all subdirectories ==
+
Note in the output see [https://unix.stackexchange.com/a/405700 here] for details, basically:
  
  $ ls -AlhR . | egrep '^-' | wc -l
+
{|class="wikitable"
 +
! Abbr  !! Description
 +
|-
 +
| LSIZE || logical size (in memory)
 +
|-
 +
| PSIZE  || physical size
 +
|-
 +
| DSIZE  || size on disk
 +
|-
 +
| refcnt || reference count
 +
|}
  
== Counting number of directories in current directory and all subdirectories ==
+
== How to tell if zfs scrub is running ==
  
$ ls -AlhR . | egrep '^d' | wc -l
+
You can get the status from the "scan:" line from:
  
= Symbolic-link management =
+
$ zpool status
  
== Data used by sym-linked files:
+
== Measure data throughput ==
  
This will de-reference the sym-links in the current directory and tell you how much data the files pointed to by the sym-links are using:
+
Use the 'pv' command from the 'pv' package, e.g.:
  
  jj5@tact:/data/backup/unity/latest$ du -hD * | sort -h
+
  # cat /dev/sda | pv | cat > /dev/null
  
= File searching =
+
Or for ZFS:
  
== Finding a file with a particular name ==
+
# zfs send data/example | pv | cat > /dev/null
  
$ find -iname "*some-part-of-the-file-name*"
+
== Using Smartctl, Smartd and Hddtemp on Debian ==
  
Will start searching from the current directory, so maybe
+
For notes on using smartctl see [https://www.lisenet.com/2014/using-smartctl-smartd-and-hddtemp-on-debian/ Using Smartctl, Smartd and Hddtemp on Debian].
  
$ cd /
+
== Report hard disk usage ==
  
first. For a case-sensitive search:
+
So you might want to know how much data a process reads or writes to a hard disk. You can monitor process total disk utilisation with the 'iotop' command. Run 'iotop' and then press 'a' for --accumulated.
  
$ find -name "*eXaCT CaSE*"
+
== Report hard disk temperatures ==
  
== Finding a file with particular content ==
+
E.g.
  
To search in /etc/ for a file with particular content:
+
# hddtemp /dev/sd[a-e]
  
$ grep -R "search-string" /etc/*
+
== Burning an ISO image to USB on Mac ==
  
To search the current directory for *.cs files containing the word "Up":
+
First insert your USB key and find the appropriate disk with:
  
  $ find . -name '*.cs' -exec grep --color=auto -H Up {} \;
+
  # diskutil list
  
== Finding a list of files with particular content ==
+
Then unmount it with:
  
E.g. to find all the files with the word 'creativity':
+
# diskutil unmountDisk /dev/disk4
  
$ grep -R creativity . | sed 's/:/ /' | awk '{ print $1 }' | sort | uniq
+
Then copy ISO image with 'dd':
  
== Using the locate command to find files ==
+
# dd if=ubuntu-18.04.1-desktop-amd64.iso of=/dev/disk4
  
$ locate part-of-filename
+
You can get dd to report progress by sending it the SIGINFO signal:
  
E.g.
+
# kill -s info 12345
  
$ locate texvc
+
== Listing all ext4 file systems ==
  
== Updating locate command's database ==
+
To see a list only of the mounted ext4 file systems:
  
  # updatedb
+
  # df -t ext4
  
= Job control =
+
== Report hierarchical file system mount points and mount options ==
  
== Stopping a running process ==
+
$ findmnt
  
Press Ctrl+Z to stop a running process.
+
== Report the mount point for the current working directory ==
  
== Listing current jobs and their status ==
+
$ findmnt "$PWD"
  
$ jobs
+
= Monitoring disk I/O =
  
== Resuming a stopped job in the backgroud ==
+
There's an app for that! iotop.
  
To resume a stopped process in the background
+
== Using iotop, top for disks ==
  
  $ bg %1
+
  # iotop -oPa
  
where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').
+
== Monitor disk I/O for performance issues ==
  
== Resuming a stopped job in the foreground ==
+
# watch iostat
  
To resume a stopped process in the foreground
+
Or e.g.
  
  $ fg %1
+
  # watch iostat -xd /dev/sd[abc]
  
where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').
+
Or use groupings like this command for 'tact':
  
== Killing a stopped job ==
+
$ iostat -g system nvme0n1 -g fast sda sdb -g data sdc sdd -d 2
  
To kill a job
+
= Monitoring a system =
  
$ kill %1
+
== Simple ZFS monitoring ==
  
where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').
+
# watch iostat
 +
# iotop
 +
# zpool iostat -v 5
 +
# watch 'hddtemp /dev/sd[a-e]; echo; zpool list; echo; zfs list'
 +
# nethogs
 +
# top
  
== Periodically run a program and watch its output ==
+
= Monitoring temperature =
  
$ watch /your/command
+
See [https://askubuntu.com/a/854029 temperature without third-party apps] for:
  
= Debian/Ubuntu package management =
+
$ cat /sys/class/thermal/thermal_zone*/temp
  
Also see [https://wiki.debian.org/WhereIsIt Where "is" it?] on the Debian Wiki.
+
and:
  
== configuring debconf ==
+
$ paste <(cat /sys/class/thermal/thermal_zone*/type) <(cat /sys/class/thermal/thermal_zone*/temp) | column -s $'\t' -t | sed 's/\(.\)..$/.\1°C/'
  
# dpkg-reconfigure debconf
+
== Monitoring CPU temperature ==
  
Set priority to low to get asked detailed questions.
+
$ watch sensors
  
== Showing list of installed packages ==
+
== Monitoring HDD temperature ==
  
# dpkg --get-selections
+
For e.g. SATA drives sda to sdd:
  
== Searching for installed package ==
+
# watch hddtemp /dev/sd[a-d]
  
# dpkg --get-selections | grep package-name
+
= ZFS =
  
or
+
== How can I determine the current size of the ARC in ZFS, and how does the ARC relate to free or cache memory? ==
  
# aptitude search package-name
+
See [https://superuser.com/q/1137416 How can I determine the current size of the ARC in ZFS, and how does the ARC relate to free or cache memory?]
  
== Showing which files are installed as part of a package ==
+
$ cat /proc/spl/kstat/zfs/arcstats
  
# dpkg -L package-name
+
Then:
  
== Installing a package ==
+
c is the target size of the ARC in bytes
 +
c_max is the maximum size of the ARC in bytes
 +
size is the current size of the ARC in bytes
  
# apt-get install package-name
+
== Stopping a ZFS scrub in progress ==
  
== Uninstalling a package ==
+
# zpool scrub -s $pool
  
# apt-get remove package-name
+
e.g. for the 'data' pool:
  
== Showing system architecture ==
+
# zpool scrub -s data
  
$ dpkg --print-architecture
+
= File management =
  
== Showing which package a file belongs to ==
+
== Listing files by size ==
  
$ which echo
+
Use capital S for Size:
/bin/echo
 
$ dpkg -S /bin/echo
 
coreutils: /bin/echo
 
$ dpkg -l | grep coreutils
 
ii  coreutils                        6.10-6                  The GNU core utilities
 
  
== Showing package information ==
+
$ ls -S
 +
 
 +
== Listing only directories ==
  
  $ apt-cache showpkg coreutils
+
  $ ls -l | egrep '^d'
  
Or for even more information:
+
== Listing only files ==
  
  $ apt-cache show coreutils
+
  $ ls -l | egrep -v '^d'
  
== List all installed packages with package version info ==
+
== Listing hidden files ==
  
  dpkg-query -l
+
  $ ls -al .[!.]*
  
== Reporting which version of a package is installed ==
+
== Creating a symbolic link ==
  
  $ dpkg -l | grep package-name
+
  $ ln -s /path/to/target link-name
  
E.g.:
+
== Creating a hard-link ==
  
  root@hope:~/letsencrypt# dpkg -l | grep augeas
+
  $ ln /path/to/target file-name
ii  augeas-lenses                  0.7.0-1ubuntu1                Set of lenses needed by libaugeas0 to parse
 
ii  libaugeas0                      0.7.0-1ubuntu1                The augeas configuration editing library and
 
  
== Comprehensive upgrade ==
+
== Changing the owner of a file ==
  
Try the following:
+
$ chown user:group <files>
  
# apt-get update
+
E.g.
# apt-get dist-upgrade
 
# apt-get autoremove
 
# apt-get remove $(deborphan)
 
# update-flashplugin-nonfree --install
 
  
== Searching all available packages ==
+
$ chown jj5:staff README
 +
$ chown root:root *
  
$ apt-cache search . | sort -d | less
+
To apply recursively into sub-directories use -R,
  
= Networking =
+
$ chown -R root:root /etc/*
  
== net-tools vs iproute2 ==
+
== Changing file permissions ==
  
The older 'net-tools' package has been replaced with 'iproute2' e.g. in [https://www.debian.org/releases/stretch/amd64/release-notes/ch-information.en.html#iproute2 stretch].
+
{|class="wikitable"
 +
|+ Object codes
 +
! User !! Group !! Other
 +
|-
 +
| u    || g     || o
 +
|}
  
 
{|class="wikitable"
 
{|class="wikitable"
! legacy net-tools commands
+
|+ Permission codes
! iproute2 replacement commands
+
! Read !! Write !! Exectue
 
|-
 
|-
| arp      || ip n (ip neighbor)
+
| r    || w    || x
 
|-
 
|-
| ifconfig || ip a (ip addr), ip link, ip -s (ip -stats)
+
| 4    || 2    || 1
|-
+
|}
| iptunnel || ip tunnel
+
 
 +
{|class="wikitable"
 +
|+ Numeric codes
 +
! 0
 +
| None
 +
|-
 +
! 1
 +
| Execute
 +
|-
 +
! 2
 +
| Write
 +
|-
 +
! 3
 +
| Write, Execute
 
|-
 
|-
| iwconfig || iw
+
! 4
 +
| Read
 
|-
 
|-
| nameif  || ip link, ifrename
+
! 5
 +
| Read, Execute
 
|-
 
|-
| netstat  || ss, ip route (for netstat-r), ip -s link (for netstat -i), ip maddr (for netstat-g)
+
! 6
 +
| Read, Write
 
|-
 
|-
| route    || ip r (ip route)
+
! 7
 +
| Read, Write, Execute
 
|}
 
|}
  
== Restart networking ==
+
See [http://catcode.com/teachmod/numeric2.html Numeric Mode in Action].
  
For servers:
+
$ chmod <user numeric code><group numeric code><other numeric code> <files>
 +
$ chmod <object codes>+|-<permission codes> <files>
  
# service networking restart
+
E.g.
  
For desktops:
+
$ chmod 600 my-private-file
 +
$ chmod go-rwx my-private-file
 +
$ chmod u+rw my-private-file
 +
$ chmod +x my-script
  
# service network-manager restart
+
== Updating config files ==
  
== Pinging with particular packet size ==
+
If you get given a new config file called new.conf and you want to integrate it with your old config file old.conf then:
  
  $ ping -M do -s <packet size in bytes> <host>
+
  $ cp old.conf updated.conf
 +
$ merge -A updated.conf new.conf old.conf
  
E.g.
+
Then go through and edit updated.conf resolving all the merge errors, picking and choosing what to update and what to keep. When you're done copy updated.conf to old.conf so it becomes the new config file.
  
$ ping -M do -s 1400 charity.progclub.org
+
The merge program is a part of the RCS package. If you don't have it:
  
== Setting [http://en.wikipedia.org/wiki/Maximum_segment_size MSS] for a particular IP address on a particular interface ==
+
$ sudo apt-get install rcs
  
# ip route add <host> dev <interface> advmss <packet size>
+
== Listing open files ==
  
E.g.
+
Use lsof to list open files. E.g.:
  
  # ip route add 10.0.0.1 dev eth0 advmss 1400
+
  # lsof
  
== Dropping configured MMS for a particular IP address ==
+
See man lsof for options.
  
# ip route flush <host>
+
== List permissions on a whole directory path ==
  
E.g.
+
E.g.:
  
  # ip route flush 10.0.0.1
+
  $ namei -om /home/jj5/workspace
  
== Listing open ports and socket information ==
+
Outputs:
  
Including which process is listening on which port.
+
f: /home/jj5/workspace/
 +
  drwxr-xr-x root root /
 +
  drwxr-xr-x root root home
 +
  drwxr-xr-x jj5  jj5  jj5
 +
  drwxr-xr-x jj5  jj5  workspace
  
# netstat -tulpn
+
== Counting non-blank lines in a file ==
  
Or use the 'ss' command:
+
E.g.:
  
  # ss -s
+
  $ cat foo.c | sed '/^\s*$/d' | wc -l
# ss -l
 
# ss -pl
 
# ss -o state established '( dport = :smtp or sport = :smtp )'
 
  
== Listing open IPv4 connections ==
+
== Cloning one directory to another with rsync ==
  
# lsof -Pnl +M -i4
+
E.g.:
  
You might need to install the lsof package:
+
rsync --acls --xattrs --stats --human-readable --recursive --del --force --times --links --hard-links --executability --numeric-ids --owner --group --perms --sparse --compress-level=0 /data/source/ hostname:/data/target/
  
# apt-get install lsof
+
== Counting number of files in current directory and all subdirectories ==
  
== Query for DNS MX record ==
+
$ ls -AlhR . | egrep '^-' | wc -l
 +
 
 +
== Counting number of directories in current directory and all subdirectories ==
  
  $ nslookup
+
  $ ls -AlhR . | egrep '^d' | wc -l
> server 127.0.0.1
 
> set q=mx
 
> mail.blackbrick.com
 
  
== Query for DNS SOA record ==
+
== Getting the status of a 'dd' process ==
  
$ dig @ns2.staticmagic.net -t SOA staticmagic.net
+
First figure out the 'dd' process number, with e.g. 'top' or 'ps aux | grep dd'
  
== Using nmap to list open ports on remote host ==
+
Then send the dd process the SIGINFO signal, which for dd process 40947 would be:
  
To check the 1,000 most common ports:
+
# kill -s info 40947
  
# nmap server.example.com
+
The dd process will report its status in the terminal its running in.
  
Or for a specific port range (e.g. 101 to 102):
+
== Transferring a large file via FAT32 file system ==
  
# nmap -p 101-102 server.example.com
+
So the maximum file size supported by a FAT32 file system (commonly used on USB keys) is 4 GB per file. If you have a file larger than 4 GB you can split it into parts and then reassemble the parts once transferred:
  
Or for all ports (1 to 65,535):
+
$ split -b 4000m input.tgz input.tgz-parts-
  
# nmap -p- server.example.com
+
Then copy the small files and reassemble:
  
== Network monitoring ==
+
$ cat input.tgz-parts-* > output.tgz
  
See [http://www.binarytides.com/linux-commands-monitor-network/ here] for details. Basically:
+
== Find the difference between two directories ==
  
# Overall bandwidth: nload, bmon, slurm, bwm-ng, cbm, speedometer, netload
+
$ diif -qr $DIR_A $DIR_B
# Overall bandwidth (batch style output): vnstat, ifstat, dstat, collectl
 
# Bandwidth per socket connection: iftop, iptraf, tcptrack, pktstat, netwatch, trafshow
 
# Bandwidth per process: nethogs
 
  
== nload ==
+
= NFS =
  
You can watch network traffic in real-time with nload:
+
== List NFS shares ==
  
# nload -u M
+
To e.g. show NFS shares on 'love':
  
== Reporting network (NIC) speed ==
+
$ showmount -e love
  
From [https://askubuntu.com/questions/431911/how-can-i-verify-the-speed-of-my-nic-in-ubuntu#431912 here]:
+
= Compression =
  
# dmesg | grep eth0
+
== How to use pigz with tar ==
# mii-tool -v eth0
+
 
# ethtool eth0
+
See [https://stackoverflow.com/a/39904353 here]:
  
Note: use ifconfig to get device name.
+
$ tar cf - paths-to-archive | pigz --best -p 8 > archive.tgz
  
== Path MTU discovery ==
+
Note: don't use --best unless you're being stingy, running without it will be much faster.
  
To do a [https://en.wikipedia.org/wiki/Path_MTU_Discovery Path MTU Discovery], from the iputils-tracepath package:
+
Also from [https://stackoverflow.com/a/50586833 here]:
  
# tracepath host.example.com
+
Fast pack:
  
== Listing available Ethernet devices ==
+
tar -I 'pigz --fast' -cf my.tar.gz whatver
  
To see a list of NICs available on the host:
+
Best pack:
  
  $ cat /proc/net/dev
+
  tar -I 'pigz --best' -cf my.tar.gz whatver
  
Also
+
Fast unpack:
  
  $ ip link
+
  tar -I pigz -xf my.tar.gz
  
== Links ==
+
== Best compression with tar ==
  
* [http://www.cyberciti.biz/faq/linux-unix-open-ports/ HowTo: UNIX / Linux Open TCP / UDP Ports]
+
From [https://superuser.com/questions/514260/how-to-obtain-maximum-compression-with-tar-gz#544643 here]:
  
= IPTables =
+
export GZIP=-9
 +
tar cvzf file.tar.gz /path/to/directory
  
== Applying firewall rules ==
+
or
  
For configuration info see [http://articles.slicehost.com/2008/4/25/ubuntu-hardy-setup-page-1 this article].
+
env GZIP=-9 tar cvzf file.tar.gz /path/to/directory
  
$ sudo vim /etc/iptables.test.rules
+
== Best parallel compression with pigz ==
$ sudo /sbin/iptables -F
 
$ sudo /sbin/iptables-restore < /etc/iptables.test.rules
 
$ sudo iptables -L
 
$ sudo -s
 
# iptables-save > /etc/iptables.up.rules
 
# exit
 
  
= ufw =
+
$ pigz --best
  
== Denying hosts with ufw ==
+
== Best parallel compression with xz ==
  
See [[Admin_reference#Denying_hosts_with_UFW|denying hosts with ufw]].
+
$ xz -9e -T 0
  
= Bind9 =
+
== Reporting compression ratios with xz ==
  
== Viewing Bind9 querylog ==
+
e.g.
  
  $ sudo rndc querylog
+
  root@love:/data/image/archive# xz -l *
  $ tail -f /var/log/syslog
+
Strms  Blocks  Compressed Uncompressed  Ratio  Check  Filename
 +
    1      3    372.2 MiB    442.3 MiB  0.841  CRC64  1999.txz
 +
    1      29  5,281.3 MiB  5,542.5 MiB  0.953  CRC64  2001.txz
 +
    1      11  1,364.3 MiB 2,084.3 MiB  0.655  CRC64  2002.txz
 +
    1      9    568.5 MiB  1,660.2 MiB  0.342  CRC64  2003.txz
 +
    1    639    66.8 GiB    119.6 GiB  0.558  CRC64  2004.txz
 +
    1    313    12.7 GiB    58.6 GiB  0.217  CRC64  2005.txz
 +
    1    414    35.0 GiB    77.4 GiB  0.452  CRC64  2006.txz
 +
    1    485    44.5 GiB    90.9 GiB  0.490  CRC64  2007.txz
 +
    1  1,690    150.0 GiB    316.8 GiB  0.473  CRC64  2008.txz
 +
    1      3    457.9 MiB    526.0 MiB  0.871  CRC64  2009.txz
 +
    1    168    27.3 GiB    31.4 GiB  0.868  CRC64  2010.txz
 +
    1      4    477.1 MiB    702.8 MiB  0.679  CRC64  2011.txz
 +
-------------------------------------------------------------------------------
 +
    12  3,768    344.6 GiB    705.5 GiB  0.488  CRC64  12 files
  
= IPSec =
+
= Symbolic-link management =
  
== Disabling IPSec ==
+
== Data used by sym-linked files:
  
# setkey -FP
+
This will de-reference the sym-links in the current directory and tell you how much data the files pointed to by the sym-links are using:
  
= OpenSSL =
+
jj5@tact:/data/backup/unity/latest$ du -hD * | sort -h
  
== Debugging IMAPS with OpenSSL ==
+
= File searching =
  
# openssl s_client -connect localhost:993
+
== Finding a file with a particular name ==
> a1 LOGIN username@host password
 
> a2 LOGOUT
 
  
== Debugging HTTPS with OpenSSL ==
+
$ find -iname "*some-part-of-the-file-name*"
  
$ openssl s_client -connect www.example.com:443
+
Will start searching from the current directory, so maybe
GET /example.html HTTP/1.1
 
host: www.example.com
 
  
== Links ==
+
$ cd /
  
* [http://www.madboa.com/geek/openssl/ OpenSSL Command-Line HOWTO]
+
first. For a case-sensitive search:
  
= Pluggable Authentication Modules (PAM) =
+
$ find -name "*eXaCT CaSE*"
  
== Links ==
+
== Finding a file with particular content ==
  
* [http://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-pam.html 42.4. Pluggable Authentication Modules (PAM)]
+
To search in /etc/ for a file with particular content:
  
= SSH =
+
$ grep -R "search-string" /etc/*
  
== Configuring SSH key login ==
+
To search the current directory for *.cs files containing the word "Up":
  
On the client machine generate a key-pair (if necessary, check for existing ~/.ssh/id_rsa.pub):
+
$ find . -name '*.cs' -exec grep --color=auto -H Up {} \;
  
$ ssh-keygen -t rsa
+
== Finding a list of files with particular content ==
  
Copy the public key from the client to the server:
+
E.g. to find all the files with the word 'creativity':
  
  $ scp ~/.ssh/id_rsa.pub user@example.org:
+
  $ grep -R creativity . | sed 's/:/ /' | awk '{ print $1 }' | sort | uniq
  
Configure the authorized keys on the server:
+
== Using the locate command to find files ==
  
  $ ssh user@example.org
+
  $ locate part-of-filename
$ mkdir ~/.ssh
 
$ chmod go-w .ssh
 
$ cat ~/id_rsa.pub >> ~/.ssh/authorized_keys
 
$ chmod 600 ~/.ssh/authorized_keys
 
$ rm ~/id_rsa.pub
 
  
== Tunneling over SSH ==
+
E.g.
  
For example, connecting a remote MySQL server to the localhost:
+
$ locate texvc
  
$ ssh -L 3306:localhost:3306 jselliot@ssh.progsoc.org
+
== Updating locate command's database ==
  
If the machine you want to connect to is not the localhost of the machine you're ssh'ing to,
+
# updatedb
 +
 
 +
== Select a random line from a text file ==
  
  $ ssh -L 3306:muspell.progsoc.uts.edu.au:3306 ssh.progsoc.uts.edu.au
+
$ shuf -n 1 input.txt
  
The -L stanza is localport:remotehost:remoteport where localport is a
+
== Extra context for grep ==
port on your machine, forwarded to remoteport on remotehost.
 
  
== Tunneling over SSH with PuTTY ==
+
If you need to show extra lines before or after your grep results use -B NUM to set how many lines before the match and -A NUM for the number of lines after the match:
  
See [http://www.anchor.com.au/hosting/support/MySQL/Connecting_to_mysql_remotely Connecting to the MySQL database remotely (via an SSH Tunnel)]
+
$ grep -B 3 -A 1 ...
  
* run putty.exe
+
= Job control =
* Connection -> SSH -> Tunnels
 
** Port forwarding: source port to 3306
 
** destination: 127.0.0.1:3306
 
** check Local
 
** click Add
 
  
== Enabling verbose SSH logging ==
+
== Stopping a running process ==
  
To see what's going on with your ssh connections,
+
Press Ctrl+Z to stop a running process.
  
$ ssh -v user@host
+
== Listing current jobs and their status ==
  
Or
+
$ jobs
  
$ ssh -vv user@host
+
== Resuming a stopped job in the backgroud ==
  
== Unlocking SSH key for session ==
+
To resume a stopped process in the background
  
  jj5@orac:~/.config/autostart$ cat ssh-add.desktop
+
  $ bg %1
[Desktop Entry]
 
Type=Application
 
Name=ssh-add
 
Comment=Adds my private key to my session.
 
Exec=/usr/bin/konsole -e 'ssh-add /home/$USER/.ssh/id_rsa'
 
  
== Links ==
+
where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').
  
* [http://blogs.perl.org/users/smylers/2011/08/ssh-productivity-tips.html SSH Can Do That? Productivity Tips for Working with Remote Servers]
+
== Resuming a stopped job in the foreground ==
* [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html PuTTY Download Page]
 
  
= Standard IO =
+
To resume a stopped process in the foreground
  
== cat EOF ==
+
$ fg %1
  
$ cat > output <<EOF
+
where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').
> text
 
> EOF
 
  
$ cat output
+
== Killing a stopped job ==
text
 
  
= Script =
+
To kill a job
  
== Creating a session log with script ==
+
$ kill %1
  
$ script -t 2> timing
+
where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').
  
The session log is in the file 'typescript' and the timing data is in 'timing'.
+
== Periodically run a program and watch its output ==
  
== Replaying a scripted session ==
+
$ watch /your/command
  
$ scriptreplay timing
+
= Debian/Ubuntu package management =
  
Uses the default file 'typescript' and the 'timing' file as specified.
+
Also see [https://wiki.debian.org/WhereIsIt Where "is" it?] on the Debian Wiki.
  
= Screen =
+
== configuring debconf ==
  
== Creating a new screen or reconnecting to a detached screen ==
+
# dpkg-reconfigure debconf
  
$ screen -R
+
Set priority to low to get asked detailed questions.
  
== Detaching a screen ==
+
== Showing list of installed packages ==
  
  $ screen -D
+
  # dpkg --get-selections
  
== Reconnecting to screen ==
+
== Searching for installed package ==
  
  $ screen -D
+
  # dpkg --get-selections | grep package-name
$ screen -R
 
  
I have a script in ~/bin/reconnect like so,
+
or
  
  #!/bin/bash
+
  # aptitude search package-name
screen -D
 
screen -R
 
  
This will detach your last screen, and reconnect it on the current terminal.
+
== Showing which files are installed as part of a package ==
  
== Scrolling in screen ==
+
# dpkg -L package-name
  
See [https://www.saltycrane.com/blog/2008/01/how-to-scroll-in-gnu-screen/ How to scroll in GNU Screen]. Basically press Ctrl+A ESC then use Page Up and Page Down. Press ESC again to exit copy mode. As usual you can use Ctrl+[ in place of ESC.
+
== Installing a package ==
  
= Vim =
+
# apt-get install package-name
  
== First, why Vim? ==
+
== Uninstalling a package ==
  
Read [http://www.viemu.com/a-why-vi-vim.html Why, oh WHY, do those #?@! nutheads use vi?]
+
# apt-get remove package-name
  
== Visual modes ==
+
== Showing system architecture ==
  
Use 'v' for visual mode, 'V' for visual line mode and Ctrl+V for visual block mode.
+
$ dpkg --print-architecture
  
== Configuring spaces instead of tabs ==
+
== Showing which package a file belongs to ==
  
I use two spaces instead of tabs. To configure, edit your .vimrc file:
+
$ which echo
 +
/bin/echo
 +
$ dpkg -S /bin/echo
 +
coreutils: /bin/echo
 +
$ dpkg -l | grep coreutils
 +
ii  coreutils                        6.10-6                  The GNU core utilities
  
$ vim ~/.vimrc
+
== Showing package information ==
  
and include the following lines:
+
$ apt-cache showpkg coreutils
  
set tabstop=2
+
Or for even more information:
set shiftwidth=2
 
set expandtab
 
  
== Configuring syntax highlighting ==
+
$ apt-cache show coreutils
  
See [http://www.cyberciti.biz/faq/turn-on-or-off-color-syntax-highlighting-in-vi-or-vim/ here].
+
== List all installed packages with package version info ==
  
Use:
+
dpkg-query -l
  
:syntax on
+
== Reporting which version of a package is installed ==
  
to turn on syntax highlighting.
+
$ dpkg -l | grep package-name
  
Use:
+
E.g.:
  
  :syntax off
+
  root@hope:~/letsencrypt# dpkg -l | grep augeas
 +
ii  augeas-lenses                  0.7.0-1ubuntu1                Set of lenses needed by libaugeas0 to parse
 +
ii  libaugeas0                      0.7.0-1ubuntu1                The augeas configuration editing library and
  
to turn off syntax highlighting.
+
== Comprehensive upgrade ==
  
To always use syntax highlighting:
+
Try the following:
  
  $ vim ~/.vimrc
+
  # apt-get update
 +
# apt-get dist-upgrade
 +
# apt-get autoremove
 +
# apt-get remove $(deborphan)
 +
# update-flashplugin-nonfree --install
  
and add:
+
== Searching all available packages ==
  
  syntax on
+
  $ apt-cache search . | sort -d | less
  
To get a list of supported colour schemes open vim and type:
+
== Reporting unattended upgrades status ==
  
:colorscheme[space][Ctrl+D]
+
See [https://askubuntu.com/questions/934807/unattended-upgrades-status#934863 here] for more info.
  
To always use a particular colorscheme edit ~/.vimrc and add (for example):
+
# tail -f /var/log/unattended-upgrades/unattended-upgrades.log
  
colorscheme desert
+
== Searching for Debian packages and versions ==
  
== Inserting a TAB character when expandtab is on ==
+
* [https://packages.debian.org/search?keywords=dnscrypt-proxy Debian package search]
  
The problem here is that you have configured vim to insert spaces, but for a particular file (e.g. a Makefile) you need to insert a character.
+
= Networking =
  
Press Ctrl+V TAB to insert a literal tab character.
+
== Determining throughput between two hosts ==
  
Or you can disable tab expansion altogether with:
+
# apt install iperf3
  
:set expandtab!
+
On the server:
  
== Changing 2 space indent to 4 space indent (e.g. for python files) ==
+
# iperf3 -s
  
:%s/^\s*/&&/g
+
On the client:
  
For more information [https://www.progclub.org/blog/2013/08/10/vim-reformat-a-python-file-to-have-4-space-indentations/ see here].
+
# iperf3 -c $SERVER_IP
  
== Recording and replaying a macro ==
+
For more info see: [https://www.cyberciti.biz/faq/how-to-test-the-network-speedthroughput-between-two-linux-servers/ How to test the network speed/throughput between two Linux servers].
  
To record a macro press 'q' and then a number between 1 and 9. E.g. press "q1". The macro is now recording. When you've finished issuing your commands press 'q' again to finish recording. To replay a macro press '@' followed by the number of the macro. That is, if you pressed "q1" to record the macro, press "@1" to replay the macro. To replay the last macro again press "@@".
+
== net-tools vs iproute2 ==
  
== Deleting to end of line ==
+
The older 'net-tools' package has been replaced with 'iproute2' e.g. in [https://www.debian.org/releases/stretch/amd64/release-notes/ch-information.en.html#iproute2 stretch].
  
d$
+
{|class="wikitable"
 
+
! legacy net-tools commands
== Deleting to beginning of line ==
+
! iproute2 replacement commands
 
+
|-
  d^
+
| arp      || ip n (ip neighbor)
 
+
|-
== Finding text ==
+
| ifconfig || ip a (ip addr), ip link, ip -s (ip -stats)
 +
|-
 +
| iptunnel || ip tunnel
 +
|-
 +
| iwconfig || iw
 +
|-
 +
| nameif  || ip link, ifrename
 +
|-
 +
| netstat || ss, ip route (for netstat-r), ip -s link (for netstat -i), ip maddr (for netstat-g)
 +
|-
 +
| route    || ip r (ip route)
 +
|}
  
To search forward for "text":
+
== Restart networking ==
  
/text
+
For servers:
  
To search backward for "text":
+
# service networking restart
  
?text
+
For desktops:
  
To repeat the last search in a forward direction press 'n', or to search again backwards press 'N'.
+
# service network-manager restart
  
== Finding and replacing text ==
+
== Pinging with particular packet size ==
  
To replace the first instance of "search" on the current line with "destroy":
+
$ ping -M do -s <packet size in bytes> <host>
  
:s/search/destroy/
+
E.g.
  
To replace all instances of "search" on the current line with "destroy":
+
$ ping -M do -s 1400 charity.progclub.org
  
:s/search/destroy/g
+
== Setting [http://en.wikipedia.org/wiki/Maximum_segment_size MSS] for a particular IP address on a particular interface ==
  
To replace all instances of "search" on lines 13 to 37 with "destroy":
+
# ip route add <host> dev <interface> advmss <packet size>
  
:13,37 s/search/destroy/g
+
E.g.
  
To replace all instances of "search" in the entire file with "destroy":
+
# ip route add 10.0.0.1 dev eth0 advmss 1400
  
:%s/search/destroy/g
+
== Dropping configured MMS for a particular IP address ==
  
== Changing DOS/Windows line-endings (CRLF) to Unix line-endings ==
+
# ip route flush <host>
  
To set the line-ending to Unix line endings run the command:
+
E.g.
  
  :setlocal ff=unix
+
  # ip route flush 10.0.0.1
  
More information on managing file formats [http://vim.wikia.com/wiki/File_format available here].
+
== Listing open ports and socket information ==
  
== Disabling auto-indent etc. to paste from clipboard ==
+
Including which process is listening on which port.
  
To disable smart indenting when you're going to paste in text:
+
# netstat -tulpn
  
:set paste
+
Or use the 'ss' command:
  
To turn it off again:
+
# ss -s
 +
# ss -l
 +
# ss -pl
 +
# ss -o state established '( dport = :smtp or sport = :smtp )'
  
:set nopaste
+
== Listing open IPv4 connections ==
  
There's more info in this article: [http://vim.wikia.com/wiki/Toggle_auto-indenting_for_code_paste Toggle auto-indenting for code paste]
+
# lsof -Pnl +M -i4
  
== Positioning windows ==
+
You might need to install the lsof package:
  
Use -o for horizontal split, e.g.:
+
# apt-get install lsof
  
vim -o a.txt b.txt
+
== Query for DNS MX record ==
  
Use -O for vertical split, e.g.:
+
$ nslookup
 +
> server 127.0.0.1
 +
> set q=mx
 +
> mail.blackbrick.com
  
vim -o a.txt b.txt
+
== Query for DNS SOA record ==
  
Use ^W to navigate windows then use directional keys h, j, k, l, etc.
+
$ dig @ns2.staticmagic.net -t SOA staticmagic.net
  
Use ^W and &lt; or &gt; to resize windows.
+
== Using nmap to list open ports on remote host ==
  
== To indent a block of text in Vim ==
+
To check the 1,000 most common ports:
  
Use the > command. E.g. to indent five lines:
+
# nmap server.example.com
  
5 > >
+
Or for a specific port range (e.g. 101 to 102):
  
Press . (dot) to keep indenting.
+
# nmap -p 101-102 server.example.com
  
Or inside a block (e.g. curly brace, HTML/XML element, etc.) you can put your cursor in the element on on the curly brace and then:
+
Or for all ports (1 to 65,535):
  
  > %
+
  # nmap -p- server.example.com
  
See [http://stackoverflow.com/questions/235839/indent-multiple-lines-quickly-in-vi#235841 here] for more.
+
== Network monitoring ==
  
== Open a file in a new window/tab ==
+
See [http://www.binarytides.com/linux-commands-monitor-network/ here] for details. Basically:
  
To open a file on the left hand side:
+
# Overall bandwidth: nload, bmon, slurm, bwm-ng, cbm, speedometer, netload
 +
# Overall bandwidth (batch style output): vnstat, ifstat, dstat, collectl
 +
# Bandwidth per socket connection: iftop, iptraf, tcptrack, pktstat, netwatch, trafshow
 +
# Bandwidth per process: nethogs
  
:vert new filename.ext
+
== nload ==
  
Note: ':vnew filename.ext' and ':vsp filename.ext' also work.
+
You can watch network traffic in real-time with nload:
  
To open a file at the top:
+
# nload -u M
  
:new filename.ext
+
== Reporting network (NIC) speed ==
  
See [http://stackoverflow.com/questions/10760310/how-to-open-a-new-file-in-vim-in-a-new-window#10762678 here] for more.
+
From [https://askubuntu.com/questions/431911/how-can-i-verify-the-speed-of-my-nic-in-ubuntu#431912 here]:
  
== Explore files in Vim ==
+
# dmesg | grep eth0
 +
# mii-tool -v eth0
 +
# ethtool eth0
  
Enter:
+
Note: use ifconfig to get device name.
  
:Explore
+
== Path MTU discovery ==
  
== Switch between Vim tabs ==
+
To do a [https://en.wikipedia.org/wiki/Path_MTU_Discovery Path MTU Discovery], from the iputils-tracepath package:
  
Use gt and gT.
+
# tracepath host.example.com
  
== Switch between Vim windows ==
+
== Listing available Ethernet devices ==
  
To toggle between open windows use:
+
To see a list of NICs available on the host:
  
  Ctrl+W W
+
  $ cat /proc/net/dev
  
To move in a direction use:
+
Also
  
  Ctrl+W h/j/k/l
+
  $ ip link
  
See [http://superuser.com/questions/280500/how-does-one-switch-between-windows-on-vim#280501 here] for more.
+
== 59 Linux Networking commands and scripts ==
  
== Insert block comment in Vim ==
+
See [https://haydenjames.io/linux-networking-commands-scripts/ 59 Linux Networking commands and scripts].
  
See [https://stackoverflow.com/a/253391/868138 here] for line-commenting.
+
== Links ==
  
So it's:
+
* [http://www.cyberciti.biz/faq/linux-unix-open-ports/ HowTo: UNIX / Linux Open TCP / UDP Ports]
  
# Ctrl+V (Note: not Shift+V!)
+
= IPTables =
# Up/Down to select rows
 
# Shift+I
 
# Enter your text, e.g. '#' or '//'
 
# Ctrl+[ (or 'Esc')
 
  
== Navigate to matching tag ==
+
== Applying firewall rules ==
  
To navigate to the matching beginning or end tag use '%'.
+
For configuration info see [http://articles.slicehost.com/2008/4/25/ubuntu-hardy-setup-page-1 this article].
  
You can also use e.g. '[{' to match the previous '{', or e.g. '])' to match the next ')'.
+
$ sudo vim /etc/iptables.test.rules
 +
$ sudo /sbin/iptables -F
 +
$ sudo /sbin/iptables-restore < /etc/iptables.test.rules
 +
$ sudo iptables -L
 +
$ sudo -s
 +
# iptables-save > /etc/iptables.up.rules
 +
# exit
  
== Auto-format HTML tags ==
+
== Blocking an IP address with iptables ==
  
Stolen from [https://www.quora.com/How-do-you-auto-format-HTML-in-Vim here].
+
To drop IP address 1.2.3.4:
  
# first join all the lines - ggVGgJ
+
# iptables -A INPUT -s 1.2.3.4 -j DROP
# Now break tags to new lines - :%s/>\s*</>\r</g
 
# Now set filetype - :set ft=html (you can do this before too)
 
# Now Indent - ggVG=
 
  
== Links ==
+
= ufw =
  
* [http://www.vim.org/ Vim: the editor]
+
== Denying hosts with ufw ==
* [http://yannesposito.com/Scratch/en/blog/Learn-Vim-Progressively/ Learn Vim Progressively]
 
* [http://michael.peopleofhonoronly.com/vim/ Vim cheat sheet for programmers]
 
* [http://stackoverflow.com/questions/4781070/how-to-insert-tab-character-when-expandtab-option-is-on-in-vim How to insert Tab character when expandtab option is ON in VIM]
 
* [https://www.linux.com/learn/tutorials/8255-vim-tips-the-basics-of-search-and-replace Vim tips: the basics of search and replace]
 
* [http://vim.wikia.com/wiki/File_format File format]
 
* [http://www.viemu.com/a_vi_vim_graphical_cheat_sheet_tutorial.html Graphical vi-vim Cheat Sheet and Tutorial]
 
* [http://www.angelwatt.com/coding/notes/vim-commands.html Vim Commands Cheat Sheet]
 
  
= Write =
+
See [[Admin_reference#Denying_hosts_with_UFW|denying hosts with ufw]].
  
== Talking to other users on the system ==
+
= Bind9 =
  
'''write''' is a unix command for talking to other users on the system. To use '''write''':
+
== Viewing Bind9 querylog ==
  
1. SSH to <username>@<hostname> and login with your username and password.
+
$ sudo rndc querylog
 +
$ tail -f /var/log/syslog
  
2. Issue the following command to find out who is logged onto the system:
+
= IPSec =
  
$ who
+
== Disabling IPSec ==
  
3. Issue the following command to talk to a specific user:
+
# setkey -FP
  
$ write <username>
+
= OpenSSL =
  
4. Enter the message you'd like to send the user, followed by Ctrl+C to send. Press Ctrl+D to cancel.
+
== Debugging IMAPS with OpenSSL ==
  
= Date =
+
# openssl s_client -connect localhost:993
 +
> a1 LOGIN username@host password
 +
> a2 LOGOUT
  
== Reporting the time on the server ==
+
== Debugging HTTPS with OpenSSL ==
  
  $ date
+
  $ openssl s_client -connect www.example.com:443
 +
GET /example.html HTTP/1.1
 +
host: www.example.com
  
== Reporting UTC time ==
+
== Links ==
  
$ date --utc
+
* [http://www.madboa.com/geek/openssl/ OpenSSL Command-Line HOWTO]
  
== Getting the date in yyyy-MM-dd-hhmmss format ==
+
= Pluggable Authentication Modules (PAM) =
  
$ date="`date +%F-%H%M%S`"
+
== Links ==
  
== Getting the year in four digits ==
+
* [http://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-pam.html 42.4. Pluggable Authentication Modules (PAM)]
  
$ year="`date +%Y`"
+
= SSH =
  
== Getting the month in two digits ==
+
== Configuring SSH key login ==
  
$ month="`date +%m`"
+
On the client machine generate a key-pair (if necessary, check for existing ~/.ssh/id_rsa.pub):
  
== Getting the day of the month in two digits ==
+
$ ssh-keygen -t rsa
  
$ day="`date +%d`"
+
Copy the public key from the client to the server:
  
== Getting yesterday's date ==
+
$ scp ~/.ssh/id_rsa.pub user@example.org:
  
$ date --date='1 day ago' +%Y-%m-%d
+
Configure the authorized keys on the server:
  
== Converting Unix time (seconds since epoch) ==
+
$ ssh user@example.org
 +
$ mkdir ~/.ssh
 +
$ chmod go-w .ssh
 +
$ cat ~/id_rsa.pub >> ~/.ssh/authorized_keys
 +
$ chmod 600 ~/.ssh/authorized_keys
 +
$ rm ~/id_rsa.pub
  
For timestamp '1501370200':
+
== Tunneling over SSH ==
  
$ date -d @1501370200 +%F-%H%M%S
+
For example, connecting a remote MySQL server to the localhost:
  
== Running timedatectl from systemd ==
+
$ ssh -L 3306:localhost:3306 jselliot@ssh.progsoc.org
  
There's a new command bundled with systmed:
+
If the machine you want to connect to is not the localhost of the machine you're ssh'ing to,
  
# timedatectl
+
  $ ssh -L 3306:muspell.progsoc.uts.edu.au:3306 ssh.progsoc.uts.edu.au
  
It reports on (and controls) how the system time is configured.
+
The -L stanza is localport:remotehost:remoteport where localport is a
 +
port on your machine, forwarded to remoteport on remotehost.
  
= MySQL =
+
== Tunneling over SSH with PuTTY ==
  
== Run mysql without authentication/authorisation ==
+
See [http://www.anchor.com.au/hosting/support/MySQL/Connecting_to_mysql_remotely Connecting to the MySQL database remotely (via an SSH Tunnel)]
  
# service mysql stop
+
* run putty.exe
# mysqld_safe --skip-grant-tables &
+
* Connection -> SSH -> Tunnels
 +
** Port forwarding: source port to 3306
 +
** destination: 127.0.0.1:3306
 +
** check Local
 +
** click Add
  
Then you can connect without a password, e.g.:
+
== Enabling verbose SSH logging ==
  
# mysql -u root mysql
+
To see what's going on with your ssh connections,
  
To stop the unauthenticated service:
+
$ ssh -v user@host
  
# mysqladmin shutdown
+
Or
  
Then restart a normal service:
+
$ ssh -vv user@host
  
# service mysql start
+
== Unlocking SSH key for session ==
  
== Logging all database queries ==
+
jj5@orac:~/.config/autostart$ cat ssh-add.desktop
 +
[Desktop Entry]
 +
Type=Application
 +
Name=ssh-add
 +
Comment=Adds my private key to my session.
 +
Exec=/usr/bin/konsole -e 'ssh-add /home/$USER/.ssh/id_rsa'
  
# vim /etc/mysql/my.cnf
+
== Links ==
  
In the [mysqld] section add:
+
* [http://blogs.perl.org/users/smylers/2011/08/ssh-productivity-tips.html SSH Can Do That? Productivity Tips for Working with Remote Servers]
 +
* [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html PuTTY Download Page]
  
log=/tmp/mysql.log
+
= Standard IO =
  
Then:
+
== cat EOF ==
  
  # service mysql restart
+
  $ cat > output <<EOF
 +
> text
 +
> EOF
  
Watch the log with:
+
$ cat output
 +
text
  
# tail -f /tmp/mysql.log
+
= Script =
  
== Dumping a MySQL database ==
+
== Creating a session log with script ==
  
You can dump the database into a file using:
+
  $ script -t 2> timing
 
  $ mysqldump -h hostname -u user --password=password databasename > filename
 
  
== Loading a MySQL database from a dump file ==
+
The session log is in the file 'typescript' and the timing data is in 'timing'.
  
You can create a database using:
+
== Replaying a scripted session ==
  
  $ echo create database databasename | mysql -h hostname -u user -p
+
  $ scriptreplay timing
  
You can restore a database using:
+
Uses the default file 'typescript' and the 'timing' file as specified.
 
$ mysql -h hostname -u user --password=password databasename < filename
 
  
== Creating a MySQL user ==
+
= Screen =
  
# mysql -h localhost -u root --password=<password>
+
== Creating a new screen or reconnecting to a detached screen ==
mysql> create user 'username'@'localhost' identified by '<password>';
 
  
== Granting all MySQL user permissions ==
+
$ screen -R
  
# mysql -h localhost -u root --password=<password>
+
== Detaching a screen ==
mysql> grant all privileges on dbname.* to user@host;
 
  
== Select domain name from email address ==
+
$ screen -D
  
SELECT SUBSTR( email, INSTR( email, '@' ) + 1 )
+
== Reconnecting to screen ==
  
== Check if MySQL connection is encrypted with TLS/SSL ==
+
$ screen -D
 +
$ screen -R
  
Check the SSL version in use:
+
I have a script in ~/bin/reconnect like so,
  
  show status like 'Ssl_version';
+
  #!/bin/bash
 +
screen -D
 +
screen -R
  
Or check the cipher in use:
+
This will detach your last screen, and reconnect it on the current terminal.
  
show status like 'Ssl_cipher';
+
== Scrolling in screen ==
  
= Apache =
+
See [https://www.saltycrane.com/blog/2008/01/how-to-scroll-in-gnu-screen/ How to scroll in GNU Screen]. Basically press Ctrl+A ESC then use Page Up and Page Down. Press ESC again to exit copy mode. As usual you can use Ctrl+[ in place of ESC.
  
== Maintaining .htaccess passwords ==
+
= tmux =
  
To add or modify the password for a user:
+
== Live collaboration with tmux ==
  
$ htpasswd /etc/apache2/passwd username
+
User A:
  
== Configuring PHP session timeout in .htaccess ==
+
tmux -S /tmp/collab
 +
chmod 777 /tmp/collab
  
For a session timeout of 9 hours:
+
User B:
  
  php_value session.cookie_lifetime 32400
+
  tmux -S /tmp/collab attach
php_value session.gc_maxlifetime 32400
 
  
== Disabling PHP magic quotes in .htaccess ==
+
= Vim =
  
php_flag magic_quotes_gpc Off
+
== First, why Vim? ==
  
== Requiring HTTP Auth in .htaccess ==
+
Read [http://www.viemu.com/a-why-vi-vim.html Why, oh WHY, do those #?@! nutheads use vi?]
  
AuthType Basic
+
== Visual modes ==
AuthName "Speak Friend And Enter"
 
AuthUserFile /home/jj5/.htpasswd
 
Require valid-user
 
  
== Restarting Apache ==
+
Use 'v' for visual mode, 'V' for visual line mode and Ctrl+V for visual block mode.
  
The hard way
+
== Configuring spaces instead of tabs ==
  
$ sudo /etc/init.d/apache2 restart
+
I use two spaces instead of tabs. To configure, edit your .vimrc file:
  
The graceful way (avoids dropping active connections)
+
$ vim ~/.vimrc
  
$ sudo apache2ctl graceful
+
and include the following lines:
  
== Allowing directory browsing ==
+
set tabstop=2
 +
set shiftwidth=2
 +
set expandtab
  
To show directory index pages, in the apache config file:
+
== Configuring syntax highlighting ==
  
<Directory /var/www/data>
+
See [http://www.cyberciti.biz/faq/turn-on-or-off-color-syntax-highlighting-in-vi-or-vim/ here].
  Options Indexes
 
</Directory>
 
  
= C =
+
Use:
  
== Locating memset function ==
+
:syntax on
  
The memset function is in &lt;string.h> as described in this article [http://www.java-samples.com/showtutorial.php?tutorialid=591 Using memset(), memcpy(), and memmove() in C]
+
to turn on syntax highlighting.
  
== Links ==
+
Use:
  
* [http://www.ibm.com/developerworks/linux/library/l-memory/ Inside memory management]
+
:syntax off
  
= PHP =
+
to turn off syntax highlighting.
  
== Including a file relative to the including file ==
+
To always use syntax highlighting:
  
  require_once( dirname( __FILE__ ) . '/relative/path/to.php' );
+
  $ vim ~/.vimrc
  
== Enabling error reporting ==
+
and add:
  
  error_reporting( E_ALL | E_STRICT );
+
  syntax on
ini_set( 'display_errors', 'On' );
 
  
== Setting an error handler ==
+
To get a list of supported colour schemes open vim and type:
  
  set_error_handler( "error_handler", E_ALL | E_STRICT );
+
  :colorscheme[space][Ctrl+D]
  
function error_handler( $error_code, $error_message, $error_file, $error_line, $error_context ) {
+
To always use a particular colorscheme edit ~/.vimrc and add (for example):
  // ...
 
}
 
  
== Disable HTML content in var_dump ==
+
colorscheme desert
  
ini_set( 'html_errors', 'off' );
+
== Inserting a TAB character when expandtab is on ==
  
= BASH scripting =
+
The problem here is that you have configured vim to insert spaces, but for a particular file (e.g. a Makefile) you need to insert a character.
  
For a primer on bash scripting see [http://www.progsoc.org/tfm/tfm03/node37.html TFM: Erotic Fantasy: /bin/sh Programming].
+
Press Ctrl+V TAB to insert a literal tab character.
  
== Telling a script to run in bash ==
+
Or you can disable tab expansion altogether with:
  
The first line of the file should be:
+
:set expandtab!
  
#!/bin/bash
+
== Changing 2 space indent to 4 space indent (e.g. for python files) ==
  
== Checking if a command-line argument was passed in ==
+
:%s/^\s*/&&/g
  
if [ -n "$1" ]; then
+
For more information [https://www.progclub.org/blog/2013/08/10/vim-reformat-a-python-file-to-have-4-space-indentations/ see here].
  echo "Missing parameter 1.";
 
  exit 1;
 
fi
 
  
== Checking if a command-line argument was not passed in ==
+
== Recording and replaying a macro ==
  
if [ "$1" = "" ]; then
+
To record a macro press 'q' and then a number between 1 and 9. E.g. press "q1". The macro is now recording. When you've finished issuing your commands press 'q' again to finish recording. To replay a macro press '@' followed by the number of the macro. That is, if you pressed "q1" to record the macro, press "@1" to replay the macro. To replay the last macro again press "@@".
  echo "Missing parameter 1.";
 
  exit 1;
 
fi
 
  
Or:
+
== Deleting to end of line ==
  
  if [ -z "$1" ]; then
+
  d$
  echo "Missing parameter 1.";
 
  exit 1;
 
fi
 
  
== Checking command exit status ==
+
== Deleting to beginning of line ==
  
  cd /my/path
+
  d^
if [ "$?" -ne "0" ]; then
 
  echo "Cannot change dir.";
 
  exit 1;
 
fi
 
  
== Checking if a file does/doesn't exist ==
+
== Finding text ==
  
Check if file exists:
+
To search forward for "text":
  
  if [ -f "/my/file" ]; then
+
  /text
  cat /my/file
 
fi
 
  
Check if file doesn't exist:
+
To search backward for "text":
  
  if [ ! -f "/my/file" ]; then
+
  ?text
  touch /my/file
 
fi
 
  
== Checking if a directory does/doesn't exist ==
+
To repeat the last search in a forward direction press 'n', or to search again backwards press 'N'.
  
Check if directory exists:
+
== Finding and replacing text ==
  
if [ -d "/my/dir" ]; then
+
To replace the first instance of "search" on the current line with "destroy":
  rmdir /my/dir
 
fi
 
  
Check if directory doesn't exist:
+
:s/search/destroy/
  
if [ ! -d "/my/dir" ]; then
+
To replace all instances of "search" on the current line with "destroy":
  mkdir /my/dir
 
fi
 
  
== Deleting old backups ==
+
:s/search/destroy/g
  
To keep only the latest five backups:
+
To replace all instances of "search" on lines 13 to 37 with "destroy":
  
  find . -maxdepth 1 -type f -printf '%T@ %p\0' | sort -r -z -n | awk 'BEGIN { RS="\0"; ORS="\0"; FS="" } NR > 5 { sub("^[0-9]*(.[0-9]*)? ", ""); print }' | xargs -0 rm -f
+
  :13,37 s/search/destroy/g
  
This script stolen from [http://stackoverflow.com/questions/25785/delete-all-but-the-most-recent-x-files-in-bash stackoverflow].
+
To replace all instances of "search" in the entire file with "destroy":
  
Requires GNU find for -printf, GNU sort for -z, GNU awk for "\0" and GNU xargs for -0, but handles files with embedded newlines or spaces.
+
:%s/search/destroy/g
  
== Changing into the script's directory ==
+
== Changing DOS/Windows line-endings (CRLF) to Unix line-endings ==
  
cd "`dirname $0`"
+
To set the line-ending to Unix line endings run the command:
  
== Getting the absolute path of a relative path ==
+
:setlocal ff=unix
  
readlink -f ./some/path
+
More information on managing file formats [http://vim.wikia.com/wiki/File_format available here].
  
== Creating a temp directory ==
+
== Disabling auto-indent etc. to paste from clipboard ==
  
dir=`mktemp -d` && cd $dir
+
To disable smart indenting when you're going to paste in text:
  
== Reading secret input from stdin ==
+
:set paste
  
You can read a secret, such as a password, like this:
+
To turn it off again:
  
  echo -n "Enter passphrase: "
+
  :set nopaste
stty -echo
 
read passphrase;
 
stty echo
 
echo ""
 
  
After running the above the secret will be in the $passphrase environment variable.
+
There's more info in this article: [http://vim.wikia.com/wiki/Toggle_auto-indenting_for_code_paste Toggle auto-indenting for code paste]
  
== String replacements in bash ==
+
== Positioning windows ==
 +
 
 +
Use -o for horizontal split, e.g.:
  
See the [http://www.tldp.org/LDP/abs/html/string-manipulation.html string manipulation] doco. Basically, to replace first occurrence:
+
vim -o a.txt b.txt
  
result=${var/find/replace}
+
Use -O for vertical split, e.g.:
  
To replace all occurrences:
+
vim -o a.txt b.txt
  
result=${var//find/replace}
+
Use ^W to navigate windows then use directional keys h, j, k, l, etc.
  
A practical example, get an ISO date and turn it into a path:
+
Use ^W and &lt; or &gt; to resize windows.
  
date="$(date +%Y-%m-%d)"
+
== To indent a block of text in Vim ==
work_dir=${date//-//}
 
  
== Sending a HEREDOC to a file ==
+
Use the > command. E.g. to indent five lines:
  
  cat << EOF > /tmp/yourfilehere
+
  5 > >
These contents will be written to the file.
 
        This line is indented.
 
EOF
 
  
== Bash case/switch statement ==
+
Press . (dot) to keep indenting.
  
See [http://tldp.org/LDP/Bash-Beginners-Guide/html/sect_07_03.html using case statements], e.g.:
+
Or inside a block (e.g. curly brace, HTML/XML element, etc.) you can put your cursor in the element on on the curly brace and then:
  
  case $space in
+
  > %
[1-6]*)
+
 
  Message="All is quiet."
+
See [http://stackoverflow.com/questions/235839/indent-multiple-lines-quickly-in-vi#235841 here] for more.
  ;;
 
[7-8]*)
 
  Message="Start thinking about cleaning out some stuff.  There's a partition that is $space % full."
 
  ;;
 
9[1-8])
 
  Message="Better hurry with that new disk...  One partition is $space % full."
 
  ;;
 
99)
 
  Message="I'm drowning here!  There's a partition at $space %!"
 
  ;;
 
*)
 
  Message="I seem to be running with an nonexistent amount of disk space..."
 
  ;;
 
esac
 
  
== Using dotglob shopt to match dot-files ==
+
== Open a file in a new window/tab ==
  
To enable dot-file matching in globs, set the dotglob shell option:
+
To open a file on the left hand side:
  
  $ shopt -s dotglob
+
  :vert new filename.ext
  
== Stopping a script from running if it previously exited due to error ==
+
Note: ':vnew filename.ext' and ':vsp filename.ext' also work.
  
persistentDataDir=/var/lib/something
+
To open a file at the top:
alarm() {
 
  touch $persistentDataDir/alarm
 
}
 
trap alarm ERR
 
[ -f $persistentDataDir/alarm ] && exit 1
 
  
== Make sure only one instance of a script is running at a time ==
+
:new filename.ext
  
ephemeralDataDir=/var/run/something
+
See [http://stackoverflow.com/questions/10760310/how-to-open-a-new-file-in-vim-in-a-new-window#10762678 here] for more.
unlock() {
 
  rmdir $ephemeralDataDir/lock
 
}
 
mkdir $ephemeralDataDir/lock || exit 1;
 
trap unlock EXIT
 
  
= Sed =
+
== Explore files in Vim ==
  
== Find and replace with sed ==
+
Enter:
  
To update the current file use '-i'. E.g.:
+
:Explore
  
sed -i 's/search-text/replace-text/' file
+
== Switch between Vim tabs ==
  
= Awk =
+
Use gt and gT.
  
== Listing IP addresses in an Apache web log ==
+
== Switch between Vim windows ==
  
awk '/GET \/path\/for\/url/ { print $1 }' /var/log/apache2/access.log | sort | uniq
+
To toggle between open windows use:
  
== Printing space-separated field ==
+
Ctrl+W W
  
echo 'no no yes no' | awk '{print $3}'
+
To move in a direction use:
  
== Printing delimited field ==
+
Ctrl+W h/j/k/l
  
echo 'no:no:yes:no' | awk -F ':' '{print $3}'
+
See [http://superuser.com/questions/280500/how-does-one-switch-between-windows-on-vim#280501 here] for more.
  
= Subversion =
+
== Insert block comment in Vim ==
  
== Setting svn:externals from the command-line ==
+
See [https://stackoverflow.com/a/253391/868138 here] for line-commenting.
  
See [http://beerpla.net/2009/06/20/how-to-properly-set-svn-svnexternals-property-in-svn-command-line/ here].
+
So it's:
  
To set an svn:externals from the command-line:
+
# Ctrl+V (Note: not Shift+V!)
 +
# Up/Down to select rows
 +
# Shift+I
 +
# Enter your text, e.g. '#' or '//'
 +
# Ctrl+[ (or 'Esc')
  
svn propset svn:externals 'rdfind-php https://www.progclub.org/svn/pcrepo/rdfind.php/branches/0.1' .
+
== Navigate to matching tag ==
svn ci -m 'Adding svn:externals for rdfind-php...'
 
svn up
 
  
Or to use a file:
+
To navigate to the matching beginning or end tag use '%'.
  
svn propset svn:externals -F svn.externals .
+
You can also use e.g. '[{' to match the previous '{', or e.g. '])' to match the next ')'.
  
== Setting svn:ignore from the command line ==
+
== Auto-format HTML tags ==
  
See [http://tedone.typepad.com/blog/2010/03/setting-svnignore-from-the-command-line.html here].
+
Stolen from [https://www.quora.com/How-do-you-auto-format-HTML-in-Vim here].
  
$ svn propset svn:ignore [file|folder] [path]
+
# first join all the lines - ggVGgJ
 +
# Now break tags to new lines - :%s/>\s*</>\r</g
 +
# Now set filetype - :set ft=html (you can do this before too)
 +
# Now Indent - ggVG=
  
Or use a file and apply recursively:
+
== Links ==
  
$ svn propset svn:ignore -RF ./svn-ignore-list.txt .
+
* [http://www.vim.org/ Vim: the editor]
 +
* [http://yannesposito.com/Scratch/en/blog/Learn-Vim-Progressively/ Learn Vim Progressively]
 +
* [http://michael.peopleofhonoronly.com/vim/ Vim cheat sheet for programmers]
 +
* [http://stackoverflow.com/questions/4781070/how-to-insert-tab-character-when-expandtab-option-is-on-in-vim How to insert Tab character when expandtab option is ON in VIM]
 +
* [https://www.linux.com/learn/tutorials/8255-vim-tips-the-basics-of-search-and-replace Vim tips: the basics of search and replace]
 +
* [http://vim.wikia.com/wiki/File_format File format]
 +
* [http://www.viemu.com/a_vi_vim_graphical_cheat_sheet_tutorial.html Graphical vi-vim Cheat Sheet and Tutorial]
 +
* [http://www.angelwatt.com/coding/notes/vim-commands.html Vim Commands Cheat Sheet]
  
= Git =
+
== Create PDF from text using Vim ==
  
== Showing status of working copy ==
+
Generate PDF from input.txt with:
  
  git status
+
  $ vim input.txt -c "hardcopy > doc.ps | q" && ps2pdf doc.ps
  
== Showing repo history ==
+
Examine output with:
  
  git log
+
  $ okular doc.pdf
  
== Showing remote repositories (including 'origin') ==
+
= Write =
  
git remote -v
+
== Talking to other users on the system ==
  
== Handy git aliases ==
+
'''write''' is a unix command for talking to other users on the system. To use '''write''':
  
Save these to your ~/.gitconfig file.
+
1. SSH to <username>@<hostname> and login with your username and password.
  
For a nicer view of history than standard 'git log' -- colourful, one-line-per commit, etc:
+
2. Issue the following command to find out who is logged onto the system:
  
  graph = !git log --all --graph --color --abbrev-commit --pretty=oneline
+
$ who
 +
 
 +
3. Issue the following command to talk to a specific user:
  
To show only the files that have changed, rather than the full line-by-line content:
+
$ write <username>
  
  dif  = !git diff --name-status
+
4. Enter the message you'd like to send the user, followed by Ctrl+C to send. Press Ctrl+D to cancel.
  
= IRC =
+
= Date =
  
== Instructing ChanServ to op an admin ==
+
== Reporting the time on the server ==
  
  /msg ChanServ op #channel user
+
  $ date
  
E.g.
+
== Reporting UTC time ==
  
  /msg ChanServ op #gnurc jj5
+
  $ date --utc
  
Sub 'op' for 'deop' to remove op privilege.
+
== Getting the date in yyyy-MM-dd-hhmmss format ==
  
= C++ =
+
$ date="`date +%F-%H%M%S`"
  
== C++ books ==
+
== Getting the year in four digits ==
  
=== Books I want ===
+
$ year="`date +%Y`"
  
* [http://smile.amazon.com/dp/1785283073 Boost.Asio C++ Network Programming 2ed]
+
== Getting the month in two digits ==
* [http://smile.amazon.com/dp/1783986549 Boost.Asio C++ Network Programming Cookbook]
 
  
* [http://www.amazon.com/dp/020170353X Accelerated C++] by Andrew Koening
+
$ month="`date +%m`"
* [http://www.amazon.com/dp/0321334876 Effective C++] by Scott Meyers
 
* [http://www.amazon.com/dp/1491903996 Effective Modern C++] by Scott Meyers
 
* [http://www.amazon.com/dp/020163371X More Effective C++] by Scott Meyers
 
* [http://www.amazon.com/dp/0201749629 Effective STL] by Scott Meyers
 
* [http://www.amazon.com/dp/0201615622 Exceptional C++] by Herb Sutter
 
* [http://www.amazon.com/dp/020170434X More Exceptional C++] by Herb Sutter
 
* [http://www.amazon.com/dp/0201760428 Exceptional C++ Style] by Herb Sutter
 
* [http://www.amazon.com/dp/0321227255 C++ Template Metaprogramming] by David Abrahams
 
* [http://www.amazon.com/dp/059652269X 97 Things Every Software Architect Should Know] by Richard Monson-Haefel
 
* [http://www.amazon.com/dp/9491028022 Introduction to the Boost C++ Libraries; Volume II - Advanced Libraries] by Robert Demming
 
  
=== Books I own ===
+
== Getting the day of the month in two digits ==
  
* [http://www.amazon.com/dp/0321563840 The C++ Programming Language 4ed] by Bjarne Stroustrup
+
$ day="`date +%d`"
* [http://smile.amazon.com/dp/9491028022 Introduction to the Boost C++ Libraries; Volume II - Advanced Libraries]
 
* [http://smile.amazon.com/dp/1849514887 Boost C++ Application Development Cookbook]
 
* [http://smile.amazon.com/dp/1782163263 Boost.Asio C++ Network Programming]
 
* [http://www.amazon.com/dp/0321113586 C++ Coding Standards] by Herb Sutter &#x2713;
 
* [http://www.amazon.com/dp/0201704315 Modern C++ Design] by Andrei Alexandrescu &#x2713;
 
* [http://www.amazon.com/dp/0596809484 97 Things Every Programmer Should Know] by Kevlin Henney &#x2713;
 
* [http://www.amazon.com/dp/0321133544 Beyond the C++ Standard Library] by Björn Karlsson &#x2713;
 
* [http://www.amazon.com/dp/9491028014 Introduction to the Boost C++ Libraries; Volume I - Foundations] by Robert Demming &#x2713;
 
* [http://www.amazon.com/dp/0123850037 API Design for C++] by Martin Reddy &#x2713;
 
* [http://www.amazon.com/dp/B00CB23URA Advanced C++ Metaprogramming] by Davide Di Gennaro &#x2713;
 
** Note: the next version of this book is: [http://www.amazon.com/dp/1484210115 Advanced Metaprogramming in Classic C++]
 
* [http://www.amazon.com/dp/1933988770 C++ Concurrency in Action: Practical Multithreading] by Anthony Williams &#x2713;
 
  
=== Books I'm not reading ===
+
== Getting yesterday's date ==
  
* [http://www.amazon.com/dp/0321563840 The C++ Programming Language 3ed] by Bjarne Stroustrup &#x2713;
+
$ date --date='1 day ago' +%Y-%m-%d
** Note: 3ed is obsolete. Buy 4ed (above).
 
  
=== Books I've read ===
+
== Converting Unix time (seconds since epoch) ==
  
* [http://www.amazon.com/dp/0596004966 C++ Pocket Reference] by Kyle Loudon &#x2713;
+
For timestamp '1501370200':
  
== C++ blogs/articles ==
+
$ date -d @1501370200 +%F-%H%M%S
  
* [http://blogs.msdn.com/b/hsutter/ Herb Sutter's MSDN blog]
+
== Running timedatectl from systemd ==
* [http://herbsutter.com/ Herb Sutter's personal blog]
 
* [http://herbsutter.com/gotw/ Herb Sutter's Guru of the Week (GotW)] updated from [http://gotw.ca/gotw/ gotw.ca]
 
  
== C++ performance tips ==
+
There's a new command bundled with systmed:
  
* ++c can be faster than c++.
+
# timedatectl
* use const for everything that you possibly can.
 
* use 'inline' when you need to define a function in a header. Typically only do that if it's small and the increase in code size from inlining is worth the cost to avoid the cost of a function call. For anything except trivially small functions you'll probably need to profile to know if it's worth it.
 
* don't use registers.
 
* const [http://www.gotw.ca/gotw/081.htm rarely affects performance].
 
* debunking a number of [http://www.open-std.org/jtc1/sc22/wg21/docs/TR18015.pdf C++ myths that won't die].
 
* std::sort<> is typically faster than qsort() because it can avoid indirection at runtime.
 
* if you've got parallelisation going on, you may be able to just replace a std::for_each with a parallel equivalent.
 
* read about [http://stackoverflow.com/questions/579887/how-expensive-is-rtti performance cost of RTTI] (Run Time Type Information) and [http://stackoverflow.com/questions/4486609/when-can-compiling-c-without-rtti-cause-problems how to disable it]
 
* don't use dynamic_cast because it is slow (typeid is faster but still relies on RTTI)
 
* prefer unique_ptr to shared_ptr when possible. unique_ptr has less overhead.
 
* [http://sunsite.uakom.sk/sunworldonline/swol-02-1996/swol-02-perf.html Which is better, static or dynamic linking?]
 
* [http://stackoverflow.com/questions/2550281/floating-point-vs-integer-calculations-on-modern-hardware Integer vs Floating-Point performance]
 
  
= systemd =
+
It reports on (and controls) how the system time is configured.
  
[https://en.wikipedia.org/wiki/Systemd systemd] is an init system used in most Linux distributions to bootstrap the user space and manage all processes subsequently.
+
= MySQL (and MariaDB) =
  
== Following a service log ==
+
== Run mysql without authentication/authorisation ==
 +
 
 +
# service mysql stop
 +
# mysqld_safe --skip-grant-tables &
 +
 
 +
Then you can connect without a password, e.g.:
 +
 
 +
# mysql -u root mysql
  
e.g. for bind9:
+
To stop the unauthenticated service:
  
  # journalctl -f -u bind9
+
  # mysqladmin shutdown
  
or for everything:
+
Then restart a normal service:
  
  # journalctl -f
+
  # service mysql start
  
== System status ==
+
== Logging all database queries ==
  
To see spawned services hierarchy:
+
# vim /etc/mysql/my.cnf
  
# systemctl status
+
In the [mysqld] section add:
  
Or for a specific service e.g.:
+
log=/tmp/mysql.log
  
# systemctl status networking
+
Then:
  
= SaltStack =
+
# service mysql restart
 +
 
 +
Watch the log with:
 +
 
 +
# tail -f /tmp/mysql.log
 +
 
 +
Or:
 +
 
 +
SET GLOBAL log_output = 'FILE';
 +
SET GLOBAL general_log_file = 'my_logs.txt';
 +
SET GLOBAL general_log = 'ON';
 +
 
 +
my_logs.txt will be in /var/lib/mysql
 +
 
 +
== Dumping a MySQL database ==
 +
 
 +
You can dump the database into a file using:
 +
 +
$ mysqldump -h hostname -u user --password=password databasename > filename
 +
 
 +
== Loading a MySQL database from a dump file ==
 +
 
 +
You can create a database using:
 +
 
 +
$ echo create database databasename | mysql -h hostname -u user -p
 +
 
 +
You can restore a database using:
 +
 +
$ mysql -h hostname -u user --password=password databasename < filename
 +
 
 +
== Creating a MySQL user ==
 +
 
 +
# mysql -h localhost -u root --password=<password>
 +
mysql> create user 'username'@'localhost' identified by '<password>';
 +
 
 +
== Granting all MySQL user permissions ==
 +
 
 +
# mysql -h localhost -u root --password=<password>
 +
mysql> grant all privileges on dbname.* to user@host;
 +
 
 +
== Select domain name from email address ==
 +
 
 +
SELECT SUBSTR( email, INSTR( email, '@' ) + 1 )
 +
 
 +
== Check if MySQL connection is encrypted with TLS/SSL ==
 +
 
 +
Check the SSL version in use:
 +
 
 +
show status like 'Ssl_version';
 +
 
 +
Or check the cipher in use:
 +
 
 +
show status like 'Ssl_cipher';
 +
 
 +
== Report on server config ==
 +
 
 +
See [https://dev.mysql.com/doc/refman/5.7/en/show.html SHOW Statements] for the full list, but check out:
 +
 
 +
SHOW VARIABLES
 +
 
 +
and
 +
 
 +
SHOW STATUS
 +
 
 +
and
 +
 
 +
SHOW PROCESSLIST
 +
 
 +
== Monitor MySQL activity ==
 +
 
 +
$ watch "mysql -t -e 'show processlist'"
 +
 
 +
= Apache =
 +
 
 +
== Reporting loaded Apache modules ==
 +
 
 +
# apache2ctl -M
 +
 
 +
== Maintaining .htaccess passwords ==
 +
 
 +
To add or modify the password for a user:
 +
 
 +
$ htpasswd /etc/apache2/passwd username
 +
 
 +
== Configuring PHP session timeout in .htaccess ==
 +
 
 +
For a session timeout of 9 hours:
 +
 
 +
php_value session.cookie_lifetime 32400
 +
php_value session.gc_maxlifetime 32400
 +
 
 +
== Disabling PHP magic quotes in .htaccess ==
 +
 
 +
php_flag magic_quotes_gpc Off
 +
 
 +
== Requiring HTTP Auth in .htaccess ==
 +
 
 +
AuthType Basic
 +
AuthName "Speak Friend And Enter"
 +
AuthUserFile /home/jj5/.htpasswd
 +
Require valid-user
 +
 
 +
== Restarting Apache ==
 +
 
 +
The hard way
 +
 
 +
$ sudo /etc/init.d/apache2 restart
 +
 
 +
The graceful way (avoids dropping active connections)
 +
 
 +
$ sudo apache2ctl graceful
 +
 
 +
== Allowing directory browsing ==
 +
 
 +
To show directory index pages, in the apache config file:
 +
 
 +
<Directory /var/www/data>
 +
  Options Indexes
 +
</Directory>
 +
 
 +
= C =
 +
 
 +
== Locating memset function ==
 +
 
 +
The memset function is in &lt;string.h> as described in this article [http://www.java-samples.com/showtutorial.php?tutorialid=591 Using memset(), memcpy(), and memmove() in C]
 +
 
 +
== Links ==
 +
 
 +
* [http://www.ibm.com/developerworks/linux/library/l-memory/ Inside memory management]
 +
 
 +
= PHP =
 +
 
 +
== Including a file relative to the including file ==
 +
 
 +
require_once( dirname( __FILE__ ) . '/relative/path/to.php' );
 +
 
 +
== Enabling error reporting ==
 +
 
 +
error_reporting( E_ALL | E_STRICT );
 +
ini_set( 'display_errors', 'On' );
 +
 
 +
== Setting an error handler ==
 +
 
 +
set_error_handler( "error_handler", E_ALL | E_STRICT );
 +
 
 +
function error_handler( $error_code, $error_message, $error_file, $error_line, $error_context ) {
 +
  // ...
 +
}
 +
 
 +
== Disable HTML content in var_dump ==
 +
 
 +
ini_set( 'html_errors', 'off' );
 +
 
 +
== Report PHP modules ==
 +
 
 +
$ php -m
 +
 
 +
== PHP Security Best Practices For Sys Admins ==
 +
 
 +
See [https://www.cyberciti.biz/tips/php-security-best-practices-tutorial.html Linux 25 PHP Security Best Practices For Sys Admins].
 +
 
 +
= BASH scripting =
 +
 
 +
For a primer on bash scripting see [http://www.progsoc.org/tfm/tfm03/node37.html TFM: Erotic Fantasy: /bin/sh Programming].
 +
 
 +
== Telling a script to run in bash ==
 +
 
 +
The first line of the file should be:
 +
 
 +
#!/bin/bash
 +
 
 +
== Checking if a command-line argument was passed in ==
 +
 
 +
if [ -n "$1" ]; then
 +
  echo "Missing parameter 1.";
 +
  exit 1;
 +
fi
 +
 
 +
== Checking if a command-line argument was not passed in ==
 +
 
 +
if [ "$1" = "" ]; then
 +
  echo "Missing parameter 1.";
 +
  exit 1;
 +
fi
 +
 
 +
Or:
 +
 
 +
if [ -z "$1" ]; then
 +
  echo "Missing parameter 1.";
 +
  exit 1;
 +
fi
 +
 
 +
== Checking command exit status ==
 +
 
 +
cd /my/path
 +
if [ "$?" -ne "0" ]; then
 +
  echo "Cannot change dir.";
 +
  exit 1;
 +
fi
 +
 
 +
== Checking if a file does/doesn't exist ==
 +
 
 +
Check if file exists:
 +
 
 +
if [ -f "/my/file" ]; then
 +
  cat /my/file
 +
fi
 +
 
 +
Check if file doesn't exist:
 +
 
 +
if [ ! -f "/my/file" ]; then
 +
  touch /my/file
 +
fi
 +
 
 +
== Checking if a directory does/doesn't exist ==
 +
 
 +
Check if directory exists:
 +
 
 +
if [ -d "/my/dir" ]; then
 +
  rmdir /my/dir
 +
fi
 +
 
 +
Check if directory doesn't exist:
 +
 
 +
if [ ! -d "/my/dir" ]; then
 +
  mkdir /my/dir
 +
fi
 +
 
 +
== Deleting old backups ==
 +
 
 +
To keep only the latest five backups:
 +
 
 +
find . -maxdepth 1 -type f -printf '%T@ %p\0' | sort -r -z -n | awk 'BEGIN { RS="\0"; ORS="\0"; FS="" } NR > 5 { sub("^[0-9]*(.[0-9]*)? ", ""); print }' | xargs -0 rm -f
 +
 
 +
This script stolen from [http://stackoverflow.com/questions/25785/delete-all-but-the-most-recent-x-files-in-bash stackoverflow].
 +
 
 +
Requires GNU find for -printf, GNU sort for -z, GNU awk for "\0" and GNU xargs for -0, but handles files with embedded newlines or spaces.
 +
 
 +
== Changing into the script's directory ==
 +
 
 +
cd "`dirname $0`"
 +
 
 +
== Getting the absolute path of a relative path ==
 +
 
 +
readlink -f ./some/path
 +
 
 +
== Creating a temp directory ==
 +
 
 +
dir=`mktemp -d` && cd $dir
 +
 
 +
== Reading secret input from stdin ==
 +
 
 +
You can read a secret, such as a password, like this:
 +
 
 +
echo -n "Enter passphrase: "
 +
stty -echo
 +
read passphrase;
 +
stty echo
 +
echo ""
 +
 
 +
After running the above the secret will be in the $passphrase environment variable.
 +
 
 +
== String replacements in bash ==
 +
 
 +
See the [http://www.tldp.org/LDP/abs/html/string-manipulation.html string manipulation] doco. Basically, to replace first occurrence:
 +
 
 +
result=${var/find/replace}
 +
 
 +
To replace all occurrences:
 +
 
 +
result=${var//find/replace}
 +
 
 +
A practical example, get an ISO date and turn it into a path:
 +
 
 +
date="$(date +%Y-%m-%d)"
 +
work_dir=${date//-//}
 +
 
 +
== Sending a HEREDOC to a file ==
 +
 
 +
cat << EOF > /tmp/yourfilehere
 +
These contents will be written to the file.
 +
        This line is indented.
 +
EOF
 +
 
 +
== Bash case/switch statement ==
 +
 
 +
See [http://tldp.org/LDP/Bash-Beginners-Guide/html/sect_07_03.html using case statements], e.g.:
 +
 
 +
case $space in
 +
[1-6]*)
 +
  Message="All is quiet."
 +
  ;;
 +
[7-8]*)
 +
  Message="Start thinking about cleaning out some stuff.  There's a partition that is $space % full."
 +
  ;;
 +
9[1-8])
 +
  Message="Better hurry with that new disk...  One partition is $space % full."
 +
  ;;
 +
99)
 +
  Message="I'm drowning here!  There's a partition at $space %!"
 +
  ;;
 +
*)
 +
  Message="I seem to be running with an nonexistent amount of disk space..."
 +
  ;;
 +
esac
 +
 
 +
== Using dotglob shopt to match dot-files ==
 +
 
 +
To enable dot-file matching in globs, set the dotglob shell option:
 +
 
 +
$ shopt -s dotglob
 +
 
 +
== Stopping a script from running if it previously exited due to error ==
 +
 
 +
persistentDataDir=/var/lib/something
 +
alarm() {
 +
  touch $persistentDataDir/alarm
 +
}
 +
trap alarm ERR
 +
[ -f $persistentDataDir/alarm ] && exit 1
 +
 
 +
== Make sure only one instance of a script is running at a time ==
 +
 
 +
ephemeralDataDir=/var/run/something
 +
unlock() {
 +
  rmdir $ephemeralDataDir/lock
 +
}
 +
mkdir $ephemeralDataDir/lock || exit 1;
 +
trap unlock EXIT
 +
 
 +
== BASH programming advice ==
 +
 
 +
See [https://blog.yossarian.net/2020/01/23/Anybody-can-write-good-bash-with-a-little-effort Anybody can write good bash (with a little effort)].
 +
 
 +
== Run a command using arguments that come from an array ==
 +
 
 +
See [https://unix.stackexchange.com/a/412647/356289 here]:
 +
 
 +
#!/bin/bash
 +
tabs=("first tab" "second tab")
 +
args=()
 +
for t in "${tabs[@]}" ; do
 +
  args+=(-t "$t")
 +
done
 +
app "${args[@]}"
 +
 
 +
== Display a CSV in columnar or tabular format ==
 +
 
 +
$ column -t -s , data.csv
 +
 
 +
== Maximum command line length ==
 +
 
 +
Technically this is an operating system limit, not a BASH limit.
 +
 
 +
$ getconf ARG_MAX    # Get argument limit in bytes/chars
 +
 
 +
= Sed =
 +
 
 +
== Find and replace with sed ==
 +
 
 +
To update the current file use '-i'. E.g.:
 +
 
 +
sed -i 's/search-text/replace-text/' file
 +
 
 +
= Awk =
 +
 
 +
== Listing IP addresses in an Apache web log ==
 +
 
 +
awk '/GET \/path\/for\/url/ { print $1 }' /var/log/apache2/access.log | sort | uniq
 +
 
 +
== Printing space-separated field ==
 +
 
 +
echo 'no no yes no' | awk '{print $3}'
 +
 
 +
== Printing delimited field ==
 +
 
 +
echo 'no:no:yes:no' | awk -F ':' '{print $3}'
 +
 
 +
= Subversion =
 +
 
 +
== Setting svn:externals from the command-line ==
 +
 
 +
See [http://beerpla.net/2009/06/20/how-to-properly-set-svn-svnexternals-property-in-svn-command-line/ here].
 +
 
 +
To set an svn:externals from the command-line:
 +
 
 +
svn propset svn:externals 'rdfind-php https://www.progclub.org/svn/pcrepo/rdfind.php/branches/0.1' .
 +
svn ci -m 'Adding svn:externals for rdfind-php...'
 +
svn up
 +
 
 +
Or to use a file:
 +
 
 +
svn propset svn:externals -F svn.externals .
 +
 
 +
== Setting svn:ignore from the command line ==
 +
 
 +
See [http://tedone.typepad.com/blog/2010/03/setting-svnignore-from-the-command-line.html here].
 +
 
 +
$ svn propset svn:ignore [file|folder] [path]
 +
 
 +
Or use a file and apply recursively:
 +
 
 +
$ svn propset svn:ignore -RF ./svn-ignore-list.txt .
 +
 
 +
= Git =
 +
 
 +
== Showing status of working copy ==
 +
 
 +
git status
 +
 
 +
== Showing repo history ==
 +
 
 +
git log
 +
 
 +
== Showing remote repositories (including 'origin') ==
 +
 
 +
git remote -v
 +
 
 +
== Handy git aliases ==
 +
 
 +
Save these to your ~/.gitconfig file.
 +
 
 +
For a nicer view of history than standard 'git log' -- colourful, one-line-per commit, etc:
 +
 
 +
  graph = !git log --all --graph --color --abbrev-commit --pretty=oneline
 +
 
 +
To show only the files that have changed, rather than the full line-by-line content:
 +
 
 +
  dif  = !git diff --name-status
 +
 
 +
== Show git remote URL ==
 +
 
 +
git config --get remote.origin.url
 +
 
 +
= IRC =
 +
 
 +
== Instructing ChanServ to op an admin ==
 +
 
 +
/msg ChanServ op #channel user
 +
 
 +
E.g.
 +
 
 +
/msg ChanServ op #gnurc jj5
 +
 
 +
Sub 'op' for 'deop' to remove op privilege.
 +
 
 +
= C++ =
 +
 
 +
== C++ books ==
 +
 
 +
=== Books I want ===
 +
 
 +
* [http://smile.amazon.com/dp/1785283073 Boost.Asio C++ Network Programming 2ed]
 +
* [http://smile.amazon.com/dp/1783986549 Boost.Asio C++ Network Programming Cookbook]
 +
 
 +
* [http://www.amazon.com/dp/020170353X Accelerated C++] by Andrew Koening
 +
* [http://www.amazon.com/dp/0321334876 Effective C++] by Scott Meyers
 +
* [http://www.amazon.com/dp/1491903996 Effective Modern C++] by Scott Meyers
 +
* [http://www.amazon.com/dp/020163371X More Effective C++] by Scott Meyers
 +
* [http://www.amazon.com/dp/0201749629 Effective STL] by Scott Meyers
 +
* [http://www.amazon.com/dp/0201615622 Exceptional C++] by Herb Sutter
 +
* [http://www.amazon.com/dp/020170434X More Exceptional C++] by Herb Sutter
 +
* [http://www.amazon.com/dp/0201760428 Exceptional C++ Style] by Herb Sutter
 +
* [http://www.amazon.com/dp/0321227255 C++ Template Metaprogramming] by David Abrahams
 +
* [http://www.amazon.com/dp/059652269X 97 Things Every Software Architect Should Know] by Richard Monson-Haefel
 +
* [http://www.amazon.com/dp/9491028022 Introduction to the Boost C++ Libraries; Volume II - Advanced Libraries] by Robert Demming
 +
 
 +
=== Books I own ===
 +
 
 +
* [http://www.amazon.com/dp/0321563840 The C++ Programming Language 4ed] by Bjarne Stroustrup
 +
* [http://smile.amazon.com/dp/9491028022 Introduction to the Boost C++ Libraries; Volume II - Advanced Libraries]
 +
* [http://smile.amazon.com/dp/1849514887 Boost C++ Application Development Cookbook]
 +
* [http://smile.amazon.com/dp/1782163263 Boost.Asio C++ Network Programming]
 +
* [http://www.amazon.com/dp/0321113586 C++ Coding Standards] by Herb Sutter &#x2713;
 +
* [http://www.amazon.com/dp/0201704315 Modern C++ Design] by Andrei Alexandrescu &#x2713;
 +
* [http://www.amazon.com/dp/0596809484 97 Things Every Programmer Should Know] by Kevlin Henney &#x2713;
 +
* [http://www.amazon.com/dp/0321133544 Beyond the C++ Standard Library] by Björn Karlsson &#x2713;
 +
* [http://www.amazon.com/dp/9491028014 Introduction to the Boost C++ Libraries; Volume I - Foundations] by Robert Demming &#x2713;
 +
* [http://www.amazon.com/dp/0123850037 API Design for C++] by Martin Reddy &#x2713;
 +
* [http://www.amazon.com/dp/B00CB23URA Advanced C++ Metaprogramming] by Davide Di Gennaro &#x2713;
 +
** Note: the next version of this book is: [http://www.amazon.com/dp/1484210115 Advanced Metaprogramming in Classic C++]
 +
* [http://www.amazon.com/dp/1933988770 C++ Concurrency in Action: Practical Multithreading] by Anthony Williams &#x2713;
 +
 
 +
=== Books I'm not reading ===
 +
 
 +
* [http://www.amazon.com/dp/0321563840 The C++ Programming Language 3ed] by Bjarne Stroustrup &#x2713;
 +
** Note: 3ed is obsolete. Buy 4ed (above).
 +
 
 +
=== Books I've read ===
 +
 
 +
* [http://www.amazon.com/dp/0596004966 C++ Pocket Reference] by Kyle Loudon &#x2713;
 +
 
 +
== C++ blogs/articles ==
 +
 
 +
* [http://blogs.msdn.com/b/hsutter/ Herb Sutter's MSDN blog]
 +
* [http://herbsutter.com/ Herb Sutter's personal blog]
 +
* [http://herbsutter.com/gotw/ Herb Sutter's Guru of the Week (GotW)] updated from [http://gotw.ca/gotw/ gotw.ca]
 +
 
 +
== C++ performance tips ==
 +
 
 +
* ++c can be faster than c++.
 +
* use const for everything that you possibly can.
 +
* use 'inline' when you need to define a function in a header. Typically only do that if it's small and the increase in code size from inlining is worth the cost to avoid the cost of a function call. For anything except trivially small functions you'll probably need to profile to know if it's worth it.
 +
* don't use registers.
 +
* const [http://www.gotw.ca/gotw/081.htm rarely affects performance].
 +
* debunking a number of [http://www.open-std.org/jtc1/sc22/wg21/docs/TR18015.pdf C++ myths that won't die].
 +
* std::sort<> is typically faster than qsort() because it can avoid indirection at runtime.
 +
* if you've got parallelisation going on, you may be able to just replace a std::for_each with a parallel equivalent.
 +
* read about [http://stackoverflow.com/questions/579887/how-expensive-is-rtti performance cost of RTTI] (Run Time Type Information) and [http://stackoverflow.com/questions/4486609/when-can-compiling-c-without-rtti-cause-problems how to disable it]
 +
* don't use dynamic_cast because it is slow (typeid is faster but still relies on RTTI)
 +
* prefer unique_ptr to shared_ptr when possible. unique_ptr has less overhead.
 +
* [http://sunsite.uakom.sk/sunworldonline/swol-02-1996/swol-02-perf.html Which is better, static or dynamic linking?]
 +
* [http://stackoverflow.com/questions/2550281/floating-point-vs-integer-calculations-on-modern-hardware Integer vs Floating-Point performance]
 +
 
 +
= systemd =
 +
 
 +
[https://en.wikipedia.org/wiki/Systemd systemd] is an init system used in most Linux distributions to bootstrap the user space and manage all processes subsequently.
 +
 
 +
== Following a service log ==
 +
 
 +
e.g. for bind9:
 +
 
 +
# journalctl -f -u bind9
 +
 
 +
or for everything:
 +
 
 +
# journalctl -f
 +
 
 +
== System status ==
 +
 
 +
To see spawned services hierarchy:
 +
 
 +
# systemctl status
 +
 
 +
Or for a specific service e.g.:
 +
 
 +
# systemctl status networking
 +
 
 +
= SaltStack =
  
 
== Running a command on specified minions ==
 
== Running a command on specified minions ==
  
  salt 'host' cmd.run 'update-locale'
+
From the salt master:
 
+
 
== Running a command on all minions ==
+
  salt 'host' cmd.run 'update-locale'
 
+
 
  salt '*' cmd.run 'update-locale'
+
From the salt minion:
 
+
 
== Listing active jobs ==
+
salt-call cmd.run 'update-locale'
 
+
 
  salt-run jobs.active
+
== Running a command on all minions ==
 
+
 
== Listing available grains ==
+
  salt '*' cmd.run 'update-locale'
 
+
 
  salt 'example' grains.items
+
== Running a specific state file ==
 
+
 
== Listing available pillar ==
+
From the salt master:
 
+
 
  salt 'example' pillar.items
+
salt $MINION_ID state.sls $STATE_FILE
 
+
 
== Reporting a grain value ==
+
From the salt minion:
 +
 
 +
salt-call state.sls $STATE_FILE
 +
 
 +
== Listing active jobs ==
 +
 
 +
  salt-run jobs.active
 +
 
 +
== Listing available grains ==
 +
 
 +
  salt 'example' grains.items
 +
 
 +
== Listing available pillar ==
 +
 
 +
  salt 'example' pillar.items
 +
 
 +
== Reporting a grain value ==
 +
 
 +
e.g. for the 'mem_total' grain:
 +
 
 +
salt '*' grains.item mem_total
 +
 
 +
== Passing a variable into a Jinja template from a salt state (SLS) ==
 +
 
 +
e.g.: to pass 'zabbix_deb_{pkg,url}' variables into the source.txt template:
 +
 
 +
<nowiki>/srv/zabbix/release/{{ zabbix_deb_pkg }}.txt:</nowiki>
 +
  file.managed:
 +
    - template: jinja
 +
    - user: root
 +
    - group: root
 +
    - mode: 644
 +
    - source: salt://file/srv/zabbix/release/source.txt
 +
    - require:
 +
      - file: /srv/zabbix/release
 +
    - default:
 +
      <nowiki>zabbix_deb_pkg: {{ zabbix_deb_pkg }}</nowiki>
 +
      <nowiki>zabbix_deb_url: {{ zabbix_deb_url }}</nowiki>
 +
 
 +
= KDE =
 +
 
 +
== Running user login script (X11/XOrg/XWindows) ==
 +
 
 +
A way to run user login scripts which works for KDE Plasma (and apparently other [https://en.wikipedia.org/wiki/X.Org_Server X.Org Server X Window System] environments) is to create a *.desktop file in ~/.config/autostart/. For example I have a ~/.config/autostart/ssh-add.desktop file with the following contents to register my SSH key in the SSH Agent:
 +
 
 +
[Desktop Entry]
 +
Type=Application
 +
Name=ssh-add
 +
Comment=Adds my private key to my session.
 +
Exec=/usr/bin/konsole -e 'ssh-add /home/$USER/.ssh/id_rsa'
 +
 
 +
== Standard KDE shortcut key bindings ==
 +
 
 +
{|class="wikitable"
 +
! Name          !! Shortcut !! Command
 +
|-
 +
| Insert comment || F1      || xdotool type "$(date +%Y-%m-%d ) $USER - "
 +
|-
 +
| Insert sydtime || F4      || xdotool type "$(date +%Y-%m-%d-%H%M%S)"
 +
|-
 +
| Konsole        || Meta+T  || konsole
 +
|-
 +
| Dolphin        || Meta+E  || dolphin
 +
|-
 +
| Kate          || Ctrl+Shift+F12 || kate
 +
|-
 +
| KCalc          || Ctrl+Shift+F11 || kcalc
 +
|-
 +
| Firefox        || Ctrl+Shift+F10 || firefox
 +
|}
 +
 
 +
== Shutting down KDE/Plasma ==
 +
 
 +
# /etc/init.d/sddm stop
 +
 
 +
= VirtualBox =
 +
 
 +
== Mounting a VirtualBox VDI file ==
 +
 
 +
Note: instead of doing this consider booting with a live CD.
 +
 
 +
See [https://askubuntu.com/questions/19430/mount-a-virtualbox-drive-image-vdi/50290#50290 here]:
 +
 
 +
Install qemu if necessary:
 +
 
 +
# apt install qemu
 +
 
 +
Then you'll need to load the network block device module:
 +
 
 +
# rmmod nbd
 +
# modprobe nbd max_part=16
 +
 
 +
Attach the .vdi image to one of the nbd you just created:
 +
 
 +
# qemu-nbd -c /dev/nbd0 drive.vdi
 +
 
 +
Now you will get a /dev/nbd0 block device, along with several /dev/nbd0p* partition device nodes.
 +
 
 +
# mount /dev/nbd0p1 /mnt
 +
 
 +
Once you are done, unmount everything and disconnect the device:
 +
 
 +
# qemu-nbd -d /dev/nbd0
 +
 
 +
= Elasticsearch =
 +
 
 +
== Report on health of your Elasticsearch cluster ==
 +
 
 +
$ curl http://localhost:9200/_cluster/health?pretty
 +
 
 +
= Zabbix =
 +
 
 +
== Zabbix Agent on Mac OS X ==
 +
 
 +
Download and install agent.
 +
 
 +
Config file is here: /usr/local/etc/zabbix/zabbix_agentd.conf
 +
 
 +
Unload agent with:
 +
 
 +
# launchctl unload /Library/LaunchDaemons/com.zabbix.zabbix_agentd.plist
 +
 
 +
Load agent with:
 +
 
 +
# launchctl load /Library/LaunchDaemons/com.zabbix.zabbix_agentd.plist
 +
 
 +
To add a 'pki' group:
 +
 
 +
# dseditgroup -o create pki
 +
 
 +
To monitor syslog on Mac OS X:
 +
 
 +
# tail -f /var/log/system.log
 +
 
 +
== Installing Zabbix Agent from source on Mac OS X ==
 +
 
 +
Download sources from https://www.zabbix.com/download_sources
 +
 
 +
$ brew update
 +
$ brew install openssl
 +
$ brew install pcre
 +
jj5@condor:~/Desktop/zabbix-4.4.7$ ./configure --enable-agent --with-openssl=/usr/local/opt/openssl/
 +
jj5@condor:~/Desktop/zabbix-4.4.7$ sudo make install
 +
 
 +
= NetBeans =
 +
 
 +
== NetBeans shortcut keys ==
 +
 
 +
{|class="wikitable sortable"
 +
! Keys        !! Action
 +
|-
 +
| Ctrl+W      || Close active window
 +
|-
 +
| Alt+Shift+K  || Open in Terminal
 +
|-
 +
| Ctrl+U U    || Convert selected text to uppercase
 +
|-
 +
| Ctrl+U L    || Convert selected text to lowercase
 +
|}
 +
 
 +
= XML =
  
e.g. for the 'mem_total' grain:
+
== How to pretty-print an XML file ==
  
  salt '*' grains.item mem_total
+
  $ xmllint --format input.xml > output.xml
  
= KDE =
+
= ApacheBench =
  
== Running user login script (X11/XOrg/XWindows) ==
+
== Run a benchmark with ApacheBench ==
  
A way to run user login scripts which works for KDE Plasma (and apparently other [https://en.wikipedia.org/wiki/X.Org_Server X.Org Server X Window System] environments) is to create a *.desktop file in ~/.config/autostart/. For example I have a ~/.config/autostart/ssh-add.desktop file with the following contents to register my SSH key in the SSH Agent:
+
$ ab -n 1000 -c 100 https://www.example.com/
 
 
[Desktop Entry]
 
Type=Application
 
Name=ssh-add
 
Comment=Adds my private key to my session.
 
Exec=/usr/bin/konsole -e 'ssh-add /home/$USER/.ssh/id_rsa'
 

Revision as of 17:53, 25 November 2022

Hi there, I'm John. I just wanted a page where I could document various Linux things that I bump into. This is that page. Thank you ProgClub. :)

Note: I have some other disorganised notes on UNIX, which include a few tips for MacOS. I also have some tips for OS X.

Note: the info on this page is probably Ubuntu (and Debian as an outside chance) specific, because I use Ubuntu pretty much everywhere these days.

You might also be interested in John's hacks.

Quick jump to: NetBeans.

References

Command-line

See Shell Commands I Wish I Knew Earlier for some interesting options.

System

Reporting system specifications from the command-line

Try any of these:

# neofetch
# inxi
# hwinfo --short

You may need to install the relevant package.

Determining which Debian/Ubuntu release your are running

$ lsb_release -r

Or for more information:

$ lsb_release

Determining which Linux/Unix you are running

$ uname

Or,

$ uname -mrs

Or,

$ uname -a

Determining which Linux kernel you are running

$ uname -r

Configuring system swappiness

Swappiness is a number between 0 and 100 that regulates how much the system uses the swap file. I like setting this value to 0 to keep my apps as responsive as possible. Create a file /etc/sysctl.d/local.conf and add this line:

vm.swappiness = 0

If you want to set the value for the current session only:

echo 0 > /proc/sys/vm/swappiness

Hardware information

For information about the hardware attached to your system, check out:

# lshw

And for PCI devices:

# lspci

And for DMI info:

# dmidecode

Note that the dmidecode command (above) will give you information about your system's motherboard. For motherboard info look for 'System Information' and/or 'Base Board Information'.

Or the grand daddy of them all:

# hwinfo

There's also inxi, e.g.:

$ inxi -b

System:    Host: tact Kernel: 4.9.0-4-amd64 x86_64 (64 bit) Desktop: KDE Plasma 5.8.6
           Distro: Debian GNU/Linux 9 (stretch)
Machine:   Device: desktop Mobo: ASUSTeK model: STRIX Z270F GAMING v: Rev 1.xx
           UEFI [Legacy]: American Megatrends v: 0906 date: 03/22/2017
CPU:       Quad core Intel Core i7-7700K (-HT-MCP-) speed/max: 799/4600 MHz
Graphics:  Card: Intel Device 5912
           Display Server: X.Org 1.19.2 drivers: modesetting (unloaded: fbdev,vesa)
           Resolution: 1920x1080@60.00hz, 1920x1080@60.00hz
           GLX Renderer: Mesa DRI Intel Kabylake GT2 GLX Version: 3.0 Mesa 13.0.6
Network:   Card: Intel Ethernet Connection (2) I219-V driver: e1000e
Drives:    HDD Total Size: 13026.6GB (42.0% used)
RAID:      Devices: 1: /dev/md1 2: /dev/md0
Info:      Processes: 355 Uptime: 11 days Memory: 21198.3/32043.3MB Client: Shell (bash) inxi: 2.3.5

Motherboard info

# dmidecode -t 2

CPU info

# lscpu

or:

# cat /proc/cpuinfo

RAM info

# dmidecode --type memory

PCI info

# lspci -v

Drive info

# cat /proc/partitions

and:

# hdparm -I /dev/sda

and:

# smartctl --info /dev/sda

You can check if a drive is SSD or not with:

# cat /sys/block/sde/queue/rotational
0=SSD
1=HDD

Viewing syslog and other logs with KSystemLog

Run the 'KSystemLog' program under KDE for a handy log viewer GUI.

CPU

Monitoring CPU clock speed

Try something like this:

$ watch 'grep MHz /proc/cpuinfo | awk "{ print \$4 }" | sort -n'

Power

Reporting on PowerShield DEFENDER UPS status

Before running `upsc` ensure service is running:

# upsdrvctl start

To see the status of the PowerShield DEFENDER systems on John's LAN:

$ upsc defender

E.g.:

jj5@orac:~$ upsc defender
Init SSL without certificate database
battery.charge: 100
battery.voltage: 27.40
battery.voltage.high: 26.00
battery.voltage.low: 20.80
battery.voltage.nominal: 24.0
device.type: ups
driver.name: blazer_usb
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.internal: 0.12
input.current.nominal: 5.0
input.frequency: 50.1
input.frequency.nominal: 50
input.voltage: 242.6
input.voltage.fault: 242.6
input.voltage.nominal: 240
output.voltage: 242.6
ups.beeper.status: disabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.load: 14
ups.productid: 5161
ups.status: OL
ups.type: offline / line interactive
ups.vendorid: 0665

Run commands on PowerShield DEFENDER UPS batteries

You can run "instant commands" using the upscmd command.

We use the 'beeper.toggle' instant command in our Salt Stack config to disable the beeper, see e.g.:

diligence:/srv/salt/conf/app/defender-1200.sls

To see "instant commands" supported by the PowerShield DEFENDER:

$ upscmd -l defender

E.g.:

jj5@orac:~$ upscmd -l defender
Instant commands supported on UPS [defender]:

beeper.toggle - Toggle the UPS beeper
load.off - Turn off the load immediately
load.on - Turn on the load immediately
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress
test.battery.start - Start a battery test
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery test

Service management

Report running services

# service --status-all

Environment

Configuring vim as your editor

Sometimes all you need is:

$ export EDITOR=/usr/bin/vim

Which works for svn, for example. Add it to your ~/.profile file to have it set for all login sessions.

Other times you need to run

# update-alternatives --config editor

And then select vim from the list. This is what you do to configure your visudo editor.

Configuring your locale

$ sudo /usr/sbin/locale-gen en_AU.UTF-8
$ sudo /usr/sbin/update-locale LANG=en_AU.UTF-8

User and group management

Adding a user

To add a new user on a linux system:

# useradd username
# passwd username

To have the home directory created from '/etc/skel' use the 'adduser' script instead:

# adduser username

Adding a user to a group

To add an existing user to an existing group:

# gpasswd -a username group

e.g. to add user 'jj5' to the 'sudo' group:

# gpasswd -a jj5 sudo

Alternatively you can use adduser, passing the username and group:

# adduser username group

e.g. to add user 'sclaughl' to the 'staff' group:

# adduser sclaughl staff

Disabling a user account

You can disable a user account with:

# passwd -l user

Note: that's a lower-case L, not a one.

Enabling a disabled user account

To can re-enable a locked user account with:

# passwd -u user

Finding which user you are logged in as

To determine which user you are running as enter the command:

$ whoami

Finding which groups you are a member of

To find which groups you are a member of:

$ groups

or

$ groups username

Where 'username' is the username of the user you are querying, e.g.:

$ groups jj5

Finding who else is logged in to the system

To see who else is logged in,

$ who

Running a command as a particular user

To run "svn update" as the user www-data:

$ sudo su -c "svn update" www-data

Reporting user and group info for the current user

$ id

Memory management

Checking available memory

To report memory statistics in megabytes:

$ free -m

Check for swap thrashing

Check your virtual memory status with vmstat:

$ vmstat

Report memory type

Report on RAM DIMMs:

# dmidecode --type 17

Report on RAM and CPU cache (including L1, L2, and L3):

# lshw -short -C memory

Or for more detail:

# lshw -C memory

Video/display management

Viewing EDID data for attached monitor

To view EDID data for an attached monitor (requires the edid-decode package):

$ cd /sys/class/drm
$ ls
$ cd card0-HDMI-A-1
$ edid-decode edid

Process management

Using 'top' for dynamic resource usage reporting

To run top:

$ top

See 15 Practical Linux Top Command Examples for some hints on usage.

To see usage for a specific user run e.g.:

$ top -u jj5

To see full command-line press 'c'.

When you're in 'top' you can:

  • press '1' (one) to toggle CPU aggregation
  • press < and > to change the sort column

Changing memory reporting in 'top'

To run top:

$ top

Press 'E' to switch between top memory units (KiB, MiB, GiB, etc.)

Press 'e' to switch between bottom memory units (KiB, MiB, GiB, etc.)

Press 'M' to sort by memory utilisation.

Press 'm' to switch between various display modes.

Showing full command-line in 'top'

To see the full command-line for processes run with -c:

$ top -c

Listing all processes currently running which were started in your current shell session

$ ps -fl

Killing specific processes

# ps aux | grep -e "this\|that" | grep -v grep | tr -s " " | cut -d " " -f 2 | xargs kill -9

Run a command for a specified time using timeout

$ timeout 3 ping jj5.net

Disk management

Reporting ext4 file-systems mounted without noatime

$ cat /proc/mounts | grep ext | grep -v noatime | sort

Creating a partition table

# parted /dev/xvdf
mktable msdos

Creating a partition

# parted /dev/xvdf
u MiB
mkpart primary 1 100%

Creating an ext4 file-system

# mkfs.ext4 /dev/xvdf1

Listing disk drives

# fdisk -l

(That's an L for "list")

Checking available disk space

$ df -h

Getting disk information

# lsblk

And

# cat /proc/partitions

Or the Grand Daddy of them all:

# lshw -class disk

(Requires the lshw package.)

Getting partition UUID and file-system type

# blkid

Checking for SSD vs magnetic disk

# cat /sys/block/sda/queue/rotational

Will be 0 for SSD and 1 for magnetic.

Monitoring a ZFS server

So some commands I run to keep an eye on my new ZFS servers:

# top
# iotop
# nethogs
# watch free -h
# watch slabtop -o
# slabtop
# watch cat /proc/meminfo
# perf top
# watch "df -h | grep -v -e tmpfs -e udev -e by-uuid"
# watch zpool iostat -v
# zpool iostat -v 2
# watch 'zpool list; echo; zfs list'
# watch zfs get compressratio -o all
# watch cat /proc/spl/kstat/zfs/arcstats

If you have a scrub or resilvering in progress you can report on progress with:

# watch zpool status -v

You can poke about in internals, e.g.:

# cat /proc/spl/kstat/zfs/arcstats
root@orac:/sys/module/zfs/parameters# tail *

You can report on property values with e.g.:

# zfs get all data

If you want to get funky:

# cd /tmp
# perf record -ag #(Ctrl+C after ~15 seconds)
# perf report --stdio

You can search for ZFS files like e.g. this:

root@orac:/# find / -name '*zfs*' -or -name '*zpool*'

You can report history of a zpool:

# zpool history $poolname

You can get a report on the dedup tables:

# zpool status -D $poolname

Or more detailed dedup table info:

# zdb -DDD $poolname

Note in the output see here for details, basically:

Abbr Description
LSIZE logical size (in memory)
PSIZE physical size
DSIZE size on disk
refcnt reference count

How to tell if zfs scrub is running

You can get the status from the "scan:" line from:

$ zpool status

Measure data throughput

Use the 'pv' command from the 'pv' package, e.g.:

# cat /dev/sda | pv | cat > /dev/null

Or for ZFS:

# zfs send data/example | pv | cat > /dev/null

Using Smartctl, Smartd and Hddtemp on Debian

For notes on using smartctl see Using Smartctl, Smartd and Hddtemp on Debian.

Report hard disk usage

So you might want to know how much data a process reads or writes to a hard disk. You can monitor process total disk utilisation with the 'iotop' command. Run 'iotop' and then press 'a' for --accumulated.

Report hard disk temperatures

E.g.

# hddtemp /dev/sd[a-e]

Burning an ISO image to USB on Mac

First insert your USB key and find the appropriate disk with:

# diskutil list

Then unmount it with:

# diskutil unmountDisk /dev/disk4

Then copy ISO image with 'dd':

# dd if=ubuntu-18.04.1-desktop-amd64.iso of=/dev/disk4

You can get dd to report progress by sending it the SIGINFO signal:

# kill -s info 12345

Listing all ext4 file systems

To see a list only of the mounted ext4 file systems:

# df -t ext4

Report hierarchical file system mount points and mount options

$ findmnt

Report the mount point for the current working directory

$ findmnt "$PWD"

Monitoring disk I/O

There's an app for that! iotop.

Using iotop, top for disks

# iotop -oPa

Monitor disk I/O for performance issues

# watch iostat

Or e.g.

# watch iostat -xd /dev/sd[abc]

Or use groupings like this command for 'tact':

$ iostat -g system nvme0n1 -g fast sda sdb -g data sdc sdd -d 2

Monitoring a system

Simple ZFS monitoring

# watch iostat
# iotop
# zpool iostat -v 5
# watch 'hddtemp /dev/sd[a-e]; echo; zpool list; echo; zfs list'
# nethogs
# top

Monitoring temperature

See temperature without third-party apps for:

$ cat /sys/class/thermal/thermal_zone*/temp

and:

$ paste <(cat /sys/class/thermal/thermal_zone*/type) <(cat /sys/class/thermal/thermal_zone*/temp) | column -s $'\t' -t | sed 's/\(.\)..$/.\1°C/'

Monitoring CPU temperature

$ watch sensors

Monitoring HDD temperature

For e.g. SATA drives sda to sdd:

# watch hddtemp /dev/sd[a-d]

ZFS

How can I determine the current size of the ARC in ZFS, and how does the ARC relate to free or cache memory?

See How can I determine the current size of the ARC in ZFS, and how does the ARC relate to free or cache memory?

$ cat /proc/spl/kstat/zfs/arcstats

Then:

c is the target size of the ARC in bytes
c_max is the maximum size of the ARC in bytes
size is the current size of the ARC in bytes

Stopping a ZFS scrub in progress

# zpool scrub -s $pool

e.g. for the 'data' pool:

# zpool scrub -s data

File management

Listing files by size

Use capital S for Size:

$ ls -S

Listing only directories

$ ls -l | egrep '^d'

Listing only files

$ ls -l | egrep -v '^d'

Listing hidden files

$ ls -al .[!.]*

Creating a symbolic link

$ ln -s /path/to/target link-name

Creating a hard-link

$ ln /path/to/target file-name

Changing the owner of a file

$ chown user:group <files>

E.g.

$ chown jj5:staff README
$ chown root:root *

To apply recursively into sub-directories use -R,

$ chown -R root:root /etc/*

Changing file permissions

Object codes
User Group Other
u g o
Permission codes
Read Write Exectue
r w x
4 2 1
Numeric codes
0 None
1 Execute
2 Write
3 Write, Execute
4 Read
5 Read, Execute
6 Read, Write
7 Read, Write, Execute

See Numeric Mode in Action.

$ chmod <user numeric code><group numeric code><other numeric code> <files>
$ chmod <object codes>+|-<permission codes> <files>

E.g.

$ chmod 600 my-private-file
$ chmod go-rwx my-private-file
$ chmod u+rw my-private-file
$ chmod +x my-script

Updating config files

If you get given a new config file called new.conf and you want to integrate it with your old config file old.conf then:

$ cp old.conf updated.conf
$ merge -A updated.conf new.conf old.conf

Then go through and edit updated.conf resolving all the merge errors, picking and choosing what to update and what to keep. When you're done copy updated.conf to old.conf so it becomes the new config file.

The merge program is a part of the RCS package. If you don't have it:

$ sudo apt-get install rcs

Listing open files

Use lsof to list open files. E.g.:

# lsof

See man lsof for options.

List permissions on a whole directory path

E.g.:

$ namei -om /home/jj5/workspace

Outputs:

f: /home/jj5/workspace/
 drwxr-xr-x root root /
 drwxr-xr-x root root home
 drwxr-xr-x jj5  jj5  jj5
 drwxr-xr-x jj5  jj5  workspace

Counting non-blank lines in a file

E.g.:

$ cat foo.c | sed '/^\s*$/d' | wc -l

Cloning one directory to another with rsync

E.g.:

rsync --acls --xattrs --stats --human-readable --recursive --del --force --times --links --hard-links --executability --numeric-ids --owner --group --perms --sparse --compress-level=0 /data/source/ hostname:/data/target/

Counting number of files in current directory and all subdirectories

$ ls -AlhR . | egrep '^-' | wc -l

Counting number of directories in current directory and all subdirectories

$ ls -AlhR . | egrep '^d' | wc -l

Getting the status of a 'dd' process

First figure out the 'dd' process number, with e.g. 'top' or 'ps aux | grep dd'

Then send the dd process the SIGINFO signal, which for dd process 40947 would be:

# kill -s info 40947

The dd process will report its status in the terminal its running in.

Transferring a large file via FAT32 file system

So the maximum file size supported by a FAT32 file system (commonly used on USB keys) is 4 GB per file. If you have a file larger than 4 GB you can split it into parts and then reassemble the parts once transferred:

$ split -b 4000m input.tgz input.tgz-parts-

Then copy the small files and reassemble:

$ cat input.tgz-parts-* > output.tgz

Find the difference between two directories

$ diif -qr $DIR_A $DIR_B

NFS

List NFS shares

To e.g. show NFS shares on 'love':

$ showmount -e love

Compression

How to use pigz with tar

See here:

$ tar cf - paths-to-archive | pigz --best -p 8 > archive.tgz

Note: don't use --best unless you're being stingy, running without it will be much faster.

Also from here:

Fast pack:

tar -I 'pigz --fast' -cf my.tar.gz whatver

Best pack:

tar -I 'pigz --best' -cf my.tar.gz whatver

Fast unpack:

tar -I pigz -xf my.tar.gz

Best compression with tar

From here:

export GZIP=-9
tar cvzf file.tar.gz /path/to/directory

or

env GZIP=-9 tar cvzf file.tar.gz /path/to/directory

Best parallel compression with pigz

$ pigz --best

Best parallel compression with xz

$ xz -9e -T 0

Reporting compression ratios with xz

e.g.

root@love:/data/image/archive# xz -l *
Strms  Blocks   Compressed Uncompressed  Ratio  Check   Filename
    1       3    372.2 MiB    442.3 MiB  0.841  CRC64   1999.txz
    1      29  5,281.3 MiB  5,542.5 MiB  0.953  CRC64   2001.txz
    1      11  1,364.3 MiB  2,084.3 MiB  0.655  CRC64   2002.txz
    1       9    568.5 MiB  1,660.2 MiB  0.342  CRC64   2003.txz
    1     639     66.8 GiB    119.6 GiB  0.558  CRC64   2004.txz
    1     313     12.7 GiB     58.6 GiB  0.217  CRC64   2005.txz
    1     414     35.0 GiB     77.4 GiB  0.452  CRC64   2006.txz
    1     485     44.5 GiB     90.9 GiB  0.490  CRC64   2007.txz
    1   1,690    150.0 GiB    316.8 GiB  0.473  CRC64   2008.txz
    1       3    457.9 MiB    526.0 MiB  0.871  CRC64   2009.txz
    1     168     27.3 GiB     31.4 GiB  0.868  CRC64   2010.txz
    1       4    477.1 MiB    702.8 MiB  0.679  CRC64   2011.txz
-------------------------------------------------------------------------------
   12   3,768    344.6 GiB    705.5 GiB  0.488  CRC64   12 files

Symbolic-link management

== Data used by sym-linked files:

This will de-reference the sym-links in the current directory and tell you how much data the files pointed to by the sym-links are using:

jj5@tact:/data/backup/unity/latest$ du -hD * | sort -h

File searching

Finding a file with a particular name

$ find -iname "*some-part-of-the-file-name*"

Will start searching from the current directory, so maybe

$ cd /

first. For a case-sensitive search:

$ find -name "*eXaCT CaSE*"

Finding a file with particular content

To search in /etc/ for a file with particular content:

$ grep -R "search-string" /etc/*

To search the current directory for *.cs files containing the word "Up":

$ find . -name '*.cs' -exec grep --color=auto -H Up {} \;

Finding a list of files with particular content

E.g. to find all the files with the word 'creativity':

$ grep -R creativity . | sed 's/:/ /' | awk '{ print $1 }' | sort | uniq

Using the locate command to find files

$ locate part-of-filename

E.g.

$ locate texvc

Updating locate command's database

# updatedb

Select a random line from a text file

$ shuf -n 1 input.txt

Extra context for grep

If you need to show extra lines before or after your grep results use -B NUM to set how many lines before the match and -A NUM for the number of lines after the match:

$ grep -B 3 -A 1 ...

Job control

Stopping a running process

Press Ctrl+Z to stop a running process.

Listing current jobs and their status

$ jobs

Resuming a stopped job in the backgroud

To resume a stopped process in the background

$ bg %1

where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').

Resuming a stopped job in the foreground

To resume a stopped process in the foreground

$ fg %1

where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').

Killing a stopped job

To kill a job

$ kill %1

where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').

Periodically run a program and watch its output

$ watch /your/command

Debian/Ubuntu package management

Also see Where "is" it? on the Debian Wiki.

configuring debconf

# dpkg-reconfigure debconf 

Set priority to low to get asked detailed questions.

Showing list of installed packages

# dpkg --get-selections

Searching for installed package

# dpkg --get-selections | grep package-name

or

# aptitude search package-name

Showing which files are installed as part of a package

# dpkg -L package-name

Installing a package

# apt-get install package-name

Uninstalling a package

# apt-get remove package-name

Showing system architecture

$ dpkg --print-architecture

Showing which package a file belongs to

$ which echo
/bin/echo
$ dpkg -S /bin/echo
coreutils: /bin/echo
$ dpkg -l | grep coreutils
ii  coreutils                         6.10-6                   The GNU core utilities

Showing package information

$ apt-cache showpkg coreutils

Or for even more information:

$ apt-cache show coreutils

List all installed packages with package version info

dpkg-query -l

Reporting which version of a package is installed

$ dpkg -l | grep package-name

E.g.:

root@hope:~/letsencrypt# dpkg -l | grep augeas
ii  augeas-lenses                   0.7.0-1ubuntu1                 Set of lenses needed by libaugeas0 to parse 
ii  libaugeas0                      0.7.0-1ubuntu1                 The augeas configuration editing library and

Comprehensive upgrade

Try the following:

# apt-get update
# apt-get dist-upgrade
# apt-get autoremove
# apt-get remove $(deborphan)
# update-flashplugin-nonfree --install

Searching all available packages

$ apt-cache search . | sort -d | less

Reporting unattended upgrades status

See here for more info.

# tail -f /var/log/unattended-upgrades/unattended-upgrades.log

Searching for Debian packages and versions

Networking

Determining throughput between two hosts

# apt install iperf3

On the server:

# iperf3 -s

On the client:

# iperf3 -c $SERVER_IP

For more info see: How to test the network speed/throughput between two Linux servers.

net-tools vs iproute2

The older 'net-tools' package has been replaced with 'iproute2' e.g. in stretch.

legacy net-tools commands iproute2 replacement commands
arp ip n (ip neighbor)
ifconfig ip a (ip addr), ip link, ip -s (ip -stats)
iptunnel ip tunnel
iwconfig iw
nameif ip link, ifrename
netstat ss, ip route (for netstat-r), ip -s link (for netstat -i), ip maddr (for netstat-g)
route ip r (ip route)

Restart networking

For servers:

# service networking restart

For desktops:

# service network-manager restart

Pinging with particular packet size

$ ping -M do -s <packet size in bytes> <host>

E.g.

$ ping -M do -s 1400 charity.progclub.org

Setting MSS for a particular IP address on a particular interface

# ip route add <host> dev <interface> advmss <packet size>

E.g.

# ip route add 10.0.0.1 dev eth0 advmss 1400

Dropping configured MMS for a particular IP address

# ip route flush <host>

E.g.

# ip route flush 10.0.0.1

Listing open ports and socket information

Including which process is listening on which port.

# netstat -tulpn

Or use the 'ss' command:

# ss -s
# ss -l
# ss -pl
# ss -o state established '( dport = :smtp or sport = :smtp )'

Listing open IPv4 connections

# lsof -Pnl +M -i4

You might need to install the lsof package:

# apt-get install lsof

Query for DNS MX record

$ nslookup
> server 127.0.0.1
> set q=mx
> mail.blackbrick.com

Query for DNS SOA record

$ dig @ns2.staticmagic.net -t SOA staticmagic.net

Using nmap to list open ports on remote host

To check the 1,000 most common ports:

# nmap server.example.com

Or for a specific port range (e.g. 101 to 102):

# nmap -p 101-102 server.example.com

Or for all ports (1 to 65,535):

# nmap -p- server.example.com

Network monitoring

See here for details. Basically:

  1. Overall bandwidth: nload, bmon, slurm, bwm-ng, cbm, speedometer, netload
  2. Overall bandwidth (batch style output): vnstat, ifstat, dstat, collectl
  3. Bandwidth per socket connection: iftop, iptraf, tcptrack, pktstat, netwatch, trafshow
  4. Bandwidth per process: nethogs

nload

You can watch network traffic in real-time with nload:

# nload -u M

Reporting network (NIC) speed

From here:

# dmesg | grep eth0
# mii-tool -v eth0
# ethtool eth0

Note: use ifconfig to get device name.

Path MTU discovery

To do a Path MTU Discovery, from the iputils-tracepath package:

# tracepath host.example.com

Listing available Ethernet devices

To see a list of NICs available on the host:

$ cat /proc/net/dev

Also

$ ip link

59 Linux Networking commands and scripts

See 59 Linux Networking commands and scripts.

Links

IPTables

Applying firewall rules

For configuration info see this article.

$ sudo vim /etc/iptables.test.rules
$ sudo /sbin/iptables -F
$ sudo /sbin/iptables-restore < /etc/iptables.test.rules
$ sudo iptables -L
$ sudo -s
# iptables-save > /etc/iptables.up.rules
# exit

Blocking an IP address with iptables

To drop IP address 1.2.3.4:

# iptables -A INPUT -s 1.2.3.4 -j DROP

ufw

Denying hosts with ufw

See denying hosts with ufw.

Bind9

Viewing Bind9 querylog

$ sudo rndc querylog
$ tail -f /var/log/syslog

IPSec

Disabling IPSec

# setkey -FP

OpenSSL

Debugging IMAPS with OpenSSL

# openssl s_client -connect localhost:993
> a1 LOGIN username@host password
> a2 LOGOUT

Debugging HTTPS with OpenSSL

$ openssl s_client -connect www.example.com:443
GET /example.html HTTP/1.1
host: www.example.com

Links

Pluggable Authentication Modules (PAM)

Links

SSH

Configuring SSH key login

On the client machine generate a key-pair (if necessary, check for existing ~/.ssh/id_rsa.pub):

$ ssh-keygen -t rsa

Copy the public key from the client to the server:

$ scp ~/.ssh/id_rsa.pub user@example.org:

Configure the authorized keys on the server:

$ ssh user@example.org
$ mkdir ~/.ssh
$ chmod go-w .ssh
$ cat ~/id_rsa.pub >> ~/.ssh/authorized_keys
$ chmod 600 ~/.ssh/authorized_keys
$ rm ~/id_rsa.pub

Tunneling over SSH

For example, connecting a remote MySQL server to the localhost:

$ ssh -L 3306:localhost:3306 jselliot@ssh.progsoc.org

If the machine you want to connect to is not the localhost of the machine you're ssh'ing to,

 $ ssh -L 3306:muspell.progsoc.uts.edu.au:3306 ssh.progsoc.uts.edu.au

The -L stanza is localport:remotehost:remoteport where localport is a port on your machine, forwarded to remoteport on remotehost.

Tunneling over SSH with PuTTY

See Connecting to the MySQL database remotely (via an SSH Tunnel)

  • run putty.exe
  • Connection -> SSH -> Tunnels
    • Port forwarding: source port to 3306
    • destination: 127.0.0.1:3306
    • check Local
    • click Add

Enabling verbose SSH logging

To see what's going on with your ssh connections,

$ ssh -v user@host

Or

$ ssh -vv user@host

Unlocking SSH key for session

jj5@orac:~/.config/autostart$ cat ssh-add.desktop 
[Desktop Entry]
Type=Application
Name=ssh-add
Comment=Adds my private key to my session.
Exec=/usr/bin/konsole -e 'ssh-add /home/$USER/.ssh/id_rsa'

Links

Standard IO

cat EOF

$ cat > output <<EOF
> text
> EOF
$ cat output
text

Script

Creating a session log with script

$ script -t 2> timing

The session log is in the file 'typescript' and the timing data is in 'timing'.

Replaying a scripted session

$ scriptreplay timing

Uses the default file 'typescript' and the 'timing' file as specified.

Screen

Creating a new screen or reconnecting to a detached screen

$ screen -R

Detaching a screen

$ screen -D

Reconnecting to screen

$ screen -D
$ screen -R

I have a script in ~/bin/reconnect like so,

#!/bin/bash
screen -D
screen -R

This will detach your last screen, and reconnect it on the current terminal.

Scrolling in screen

See How to scroll in GNU Screen. Basically press Ctrl+A ESC then use Page Up and Page Down. Press ESC again to exit copy mode. As usual you can use Ctrl+[ in place of ESC.

tmux

Live collaboration with tmux

User A:

tmux -S /tmp/collab
chmod 777 /tmp/collab

User B:

tmux -S /tmp/collab attach

Vim

First, why Vim?

Read Why, oh WHY, do those #?@! nutheads use vi?

Visual modes

Use 'v' for visual mode, 'V' for visual line mode and Ctrl+V for visual block mode.

Configuring spaces instead of tabs

I use two spaces instead of tabs. To configure, edit your .vimrc file:

$ vim ~/.vimrc

and include the following lines:

set tabstop=2
set shiftwidth=2
set expandtab

Configuring syntax highlighting

See here.

Use:

:syntax on

to turn on syntax highlighting.

Use:

:syntax off

to turn off syntax highlighting.

To always use syntax highlighting:

$ vim ~/.vimrc

and add:

syntax on

To get a list of supported colour schemes open vim and type:

:colorscheme[space][Ctrl+D]

To always use a particular colorscheme edit ~/.vimrc and add (for example):

colorscheme desert

Inserting a TAB character when expandtab is on

The problem here is that you have configured vim to insert spaces, but for a particular file (e.g. a Makefile) you need to insert a character.

Press Ctrl+V TAB to insert a literal tab character.

Or you can disable tab expansion altogether with:

:set expandtab!

Changing 2 space indent to 4 space indent (e.g. for python files)

:%s/^\s*/&&/g

For more information see here.

Recording and replaying a macro

To record a macro press 'q' and then a number between 1 and 9. E.g. press "q1". The macro is now recording. When you've finished issuing your commands press 'q' again to finish recording. To replay a macro press '@' followed by the number of the macro. That is, if you pressed "q1" to record the macro, press "@1" to replay the macro. To replay the last macro again press "@@".

Deleting to end of line

d$

Deleting to beginning of line

d^

Finding text

To search forward for "text":

/text

To search backward for "text":

?text

To repeat the last search in a forward direction press 'n', or to search again backwards press 'N'.

Finding and replacing text

To replace the first instance of "search" on the current line with "destroy":

:s/search/destroy/

To replace all instances of "search" on the current line with "destroy":

:s/search/destroy/g

To replace all instances of "search" on lines 13 to 37 with "destroy":

:13,37 s/search/destroy/g

To replace all instances of "search" in the entire file with "destroy":

:%s/search/destroy/g

Changing DOS/Windows line-endings (CRLF) to Unix line-endings

To set the line-ending to Unix line endings run the command:

:setlocal ff=unix

More information on managing file formats available here.

Disabling auto-indent etc. to paste from clipboard

To disable smart indenting when you're going to paste in text:

:set paste

To turn it off again:

:set nopaste

There's more info in this article: Toggle auto-indenting for code paste

Positioning windows

Use -o for horizontal split, e.g.:

vim -o a.txt b.txt

Use -O for vertical split, e.g.:

vim -o a.txt b.txt

Use ^W to navigate windows then use directional keys h, j, k, l, etc.

Use ^W and < or > to resize windows.

To indent a block of text in Vim

Use the > command. E.g. to indent five lines:

5 > >

Press . (dot) to keep indenting.

Or inside a block (e.g. curly brace, HTML/XML element, etc.) you can put your cursor in the element on on the curly brace and then:

> %

See here for more.

Open a file in a new window/tab

To open a file on the left hand side:

:vert new filename.ext

Note: ':vnew filename.ext' and ':vsp filename.ext' also work.

To open a file at the top:

:new filename.ext

See here for more.

Explore files in Vim

Enter:

:Explore

Switch between Vim tabs

Use gt and gT.

Switch between Vim windows

To toggle between open windows use:

Ctrl+W W

To move in a direction use:

Ctrl+W h/j/k/l

See here for more.

Insert block comment in Vim

See here for line-commenting.

So it's:

  1. Ctrl+V (Note: not Shift+V!)
  2. Up/Down to select rows
  3. Shift+I
  4. Enter your text, e.g. '#' or '//'
  5. Ctrl+[ (or 'Esc')

Navigate to matching tag

To navigate to the matching beginning or end tag use '%'.

You can also use e.g. '[{' to match the previous '{', or e.g. '])' to match the next ')'.

Auto-format HTML tags

Stolen from here.

  1. first join all the lines - ggVGgJ
  2. Now break tags to new lines - :%s/>\s*</>\r</g
  3. Now set filetype - :set ft=html (you can do this before too)
  4. Now Indent - ggVG=

Links

Create PDF from text using Vim

Generate PDF from input.txt with:

$ vim input.txt -c "hardcopy > doc.ps | q" && ps2pdf doc.ps

Examine output with:

$ okular doc.pdf

Write

Talking to other users on the system

write is a unix command for talking to other users on the system. To use write:

1. SSH to <username>@<hostname> and login with your username and password.

2. Issue the following command to find out who is logged onto the system:

$ who

3. Issue the following command to talk to a specific user:

$ write <username>

4. Enter the message you'd like to send the user, followed by Ctrl+C to send. Press Ctrl+D to cancel.

Date

Reporting the time on the server

$ date

Reporting UTC time

$ date --utc

Getting the date in yyyy-MM-dd-hhmmss format

$ date="`date +%F-%H%M%S`"

Getting the year in four digits

$ year="`date +%Y`"

Getting the month in two digits

$ month="`date +%m`"

Getting the day of the month in two digits

$ day="`date +%d`"

Getting yesterday's date

$ date --date='1 day ago' +%Y-%m-%d

Converting Unix time (seconds since epoch)

For timestamp '1501370200':

$ date -d @1501370200 +%F-%H%M%S

Running timedatectl from systemd

There's a new command bundled with systmed:

# timedatectl

It reports on (and controls) how the system time is configured.

MySQL (and MariaDB)

Run mysql without authentication/authorisation

# service mysql stop
# mysqld_safe --skip-grant-tables &

Then you can connect without a password, e.g.:

# mysql -u root mysql

To stop the unauthenticated service:

# mysqladmin shutdown

Then restart a normal service:

# service mysql start

Logging all database queries

# vim /etc/mysql/my.cnf

In the [mysqld] section add:

log=/tmp/mysql.log

Then:

# service mysql restart

Watch the log with:

# tail -f /tmp/mysql.log

Or:

SET GLOBAL log_output = 'FILE';
SET GLOBAL general_log_file = 'my_logs.txt';
SET GLOBAL general_log = 'ON';

my_logs.txt will be in /var/lib/mysql

Dumping a MySQL database

You can dump the database into a file using:

$ mysqldump -h hostname -u user --password=password databasename > filename

Loading a MySQL database from a dump file

You can create a database using:

$ echo create database databasename | mysql -h hostname -u user -p

You can restore a database using:

$ mysql -h hostname -u user --password=password databasename < filename

Creating a MySQL user

# mysql -h localhost -u root --password=<password>
mysql> create user 'username'@'localhost' identified by '<password>';

Granting all MySQL user permissions

# mysql -h localhost -u root --password=<password>
mysql> grant all privileges on dbname.* to user@host;

Select domain name from email address

SELECT SUBSTR( email, INSTR( email, '@' ) + 1 )

Check if MySQL connection is encrypted with TLS/SSL

Check the SSL version in use:

show status like 'Ssl_version';

Or check the cipher in use:

show status like 'Ssl_cipher';

Report on server config

See SHOW Statements for the full list, but check out:

SHOW VARIABLES

and

SHOW STATUS

and

SHOW PROCESSLIST

Monitor MySQL activity

$ watch "mysql -t -e 'show processlist'"

Apache

Reporting loaded Apache modules

# apache2ctl -M

Maintaining .htaccess passwords

To add or modify the password for a user:

$ htpasswd /etc/apache2/passwd username

Configuring PHP session timeout in .htaccess

For a session timeout of 9 hours:

php_value session.cookie_lifetime 32400
php_value session.gc_maxlifetime 32400

Disabling PHP magic quotes in .htaccess

php_flag magic_quotes_gpc Off

Requiring HTTP Auth in .htaccess

AuthType Basic
AuthName "Speak Friend And Enter"
AuthUserFile /home/jj5/.htpasswd
Require valid-user

Restarting Apache

The hard way

$ sudo /etc/init.d/apache2 restart

The graceful way (avoids dropping active connections)

$ sudo apache2ctl graceful

Allowing directory browsing

To show directory index pages, in the apache config file:

<Directory /var/www/data>
  Options Indexes
</Directory>

C

Locating memset function

The memset function is in <string.h> as described in this article Using memset(), memcpy(), and memmove() in C

Links

PHP

Including a file relative to the including file

require_once( dirname( __FILE__ ) . '/relative/path/to.php' );

Enabling error reporting

error_reporting( E_ALL | E_STRICT );
ini_set( 'display_errors', 'On' );

Setting an error handler

set_error_handler( "error_handler", E_ALL | E_STRICT );
function error_handler( $error_code, $error_message, $error_file, $error_line, $error_context ) {
  // ...
}

Disable HTML content in var_dump

ini_set( 'html_errors', 'off' );

Report PHP modules

$ php -m

PHP Security Best Practices For Sys Admins

See Linux 25 PHP Security Best Practices For Sys Admins.

BASH scripting

For a primer on bash scripting see TFM: Erotic Fantasy: /bin/sh Programming.

Telling a script to run in bash

The first line of the file should be:

#!/bin/bash

Checking if a command-line argument was passed in

if [ -n "$1" ]; then
  echo "Missing parameter 1.";
  exit 1;
fi

Checking if a command-line argument was not passed in

if [ "$1" = "" ]; then
  echo "Missing parameter 1.";
  exit 1;
fi

Or:

if [ -z "$1" ]; then
  echo "Missing parameter 1.";
  exit 1;
fi

Checking command exit status

cd /my/path
if [ "$?" -ne "0" ]; then
  echo "Cannot change dir.";
  exit 1;
fi

Checking if a file does/doesn't exist

Check if file exists:

if [ -f "/my/file" ]; then
  cat /my/file
fi

Check if file doesn't exist:

if [ ! -f "/my/file" ]; then
  touch /my/file
fi

Checking if a directory does/doesn't exist

Check if directory exists:

if [ -d "/my/dir" ]; then
  rmdir /my/dir
fi

Check if directory doesn't exist:

if [ ! -d "/my/dir" ]; then
  mkdir /my/dir
fi

Deleting old backups

To keep only the latest five backups:

find . -maxdepth 1 -type f -printf '%T@ %p\0' | sort -r -z -n | awk 'BEGIN { RS="\0"; ORS="\0"; FS="" } NR > 5 { sub("^[0-9]*(.[0-9]*)? ", ""); print }' | xargs -0 rm -f

This script stolen from stackoverflow.

Requires GNU find for -printf, GNU sort for -z, GNU awk for "\0" and GNU xargs for -0, but handles files with embedded newlines or spaces.

Changing into the script's directory

cd "`dirname $0`"

Getting the absolute path of a relative path

readlink -f ./some/path

Creating a temp directory

dir=`mktemp -d` && cd $dir

Reading secret input from stdin

You can read a secret, such as a password, like this:

echo -n "Enter passphrase: "
stty -echo
read passphrase;
stty echo
echo ""

After running the above the secret will be in the $passphrase environment variable.

String replacements in bash

See the string manipulation doco. Basically, to replace first occurrence:

result=${var/find/replace}

To replace all occurrences:

result=${var//find/replace}

A practical example, get an ISO date and turn it into a path:

date="$(date +%Y-%m-%d)"
work_dir=${date//-//}

Sending a HEREDOC to a file

cat << EOF > /tmp/yourfilehere
These contents will be written to the file.
        This line is indented.
EOF

Bash case/switch statement

See using case statements, e.g.:

case $space in
[1-6]*)
  Message="All is quiet."
  ;;
[7-8]*)
  Message="Start thinking about cleaning out some stuff.  There's a partition that is $space % full."
  ;;
9[1-8])
  Message="Better hurry with that new disk...  One partition is $space % full."
  ;;
99)
  Message="I'm drowning here!  There's a partition at $space %!"
  ;;
*)
  Message="I seem to be running with an nonexistent amount of disk space..."
  ;;
esac

Using dotglob shopt to match dot-files

To enable dot-file matching in globs, set the dotglob shell option:

$ shopt -s dotglob

Stopping a script from running if it previously exited due to error

persistentDataDir=/var/lib/something
alarm() {
  touch $persistentDataDir/alarm
}
trap alarm ERR
[ -f $persistentDataDir/alarm ] && exit 1

Make sure only one instance of a script is running at a time

ephemeralDataDir=/var/run/something
unlock() {
  rmdir $ephemeralDataDir/lock
}
mkdir $ephemeralDataDir/lock || exit 1;
trap unlock EXIT

BASH programming advice

See Anybody can write good bash (with a little effort).

Run a command using arguments that come from an array

See here:

#!/bin/bash
tabs=("first tab" "second tab")
args=()
for t in "${tabs[@]}" ; do 
  args+=(-t "$t")
done
app "${args[@]}"

Display a CSV in columnar or tabular format

$ column -t -s , data.csv

Maximum command line length

Technically this is an operating system limit, not a BASH limit.

$ getconf ARG_MAX    # Get argument limit in bytes/chars

Sed

Find and replace with sed

To update the current file use '-i'. E.g.:

sed -i 's/search-text/replace-text/' file

Awk

Listing IP addresses in an Apache web log

awk '/GET \/path\/for\/url/ { print $1 }' /var/log/apache2/access.log | sort | uniq

Printing space-separated field

echo 'no no yes no' | awk '{print $3}'

Printing delimited field

echo 'no:no:yes:no' | awk -F ':' '{print $3}'

Subversion

Setting svn:externals from the command-line

See here.

To set an svn:externals from the command-line:

svn propset svn:externals 'rdfind-php https://www.progclub.org/svn/pcrepo/rdfind.php/branches/0.1' .
svn ci -m 'Adding svn:externals for rdfind-php...'
svn up

Or to use a file:

svn propset svn:externals -F svn.externals .

Setting svn:ignore from the command line

See here.

$ svn propset svn:ignore [file|folder] [path]

Or use a file and apply recursively:

$ svn propset svn:ignore -RF ./svn-ignore-list.txt .

Git

Showing status of working copy

git status

Showing repo history

git log

Showing remote repositories (including 'origin')

git remote -v

Handy git aliases

Save these to your ~/.gitconfig file.

For a nicer view of history than standard 'git log' -- colourful, one-line-per commit, etc:

 graph = !git log --all --graph --color --abbrev-commit --pretty=oneline

To show only the files that have changed, rather than the full line-by-line content:

 dif   = !git diff --name-status

Show git remote URL

git config --get remote.origin.url

IRC

Instructing ChanServ to op an admin

/msg ChanServ op #channel user

E.g.

/msg ChanServ op #gnurc jj5

Sub 'op' for 'deop' to remove op privilege.

C++

C++ books

Books I want

Books I own

Books I'm not reading

Books I've read

C++ blogs/articles

C++ performance tips

  • ++c can be faster than c++.
  • use const for everything that you possibly can.
  • use 'inline' when you need to define a function in a header. Typically only do that if it's small and the increase in code size from inlining is worth the cost to avoid the cost of a function call. For anything except trivially small functions you'll probably need to profile to know if it's worth it.
  • don't use registers.
  • const rarely affects performance.
  • debunking a number of C++ myths that won't die.
  • std::sort<> is typically faster than qsort() because it can avoid indirection at runtime.
  • if you've got parallelisation going on, you may be able to just replace a std::for_each with a parallel equivalent.
  • read about performance cost of RTTI (Run Time Type Information) and how to disable it
  • don't use dynamic_cast because it is slow (typeid is faster but still relies on RTTI)
  • prefer unique_ptr to shared_ptr when possible. unique_ptr has less overhead.
  • Which is better, static or dynamic linking?
  • Integer vs Floating-Point performance

systemd

systemd is an init system used in most Linux distributions to bootstrap the user space and manage all processes subsequently.

Following a service log

e.g. for bind9:

# journalctl -f -u bind9

or for everything:

# journalctl -f

System status

To see spawned services hierarchy:

# systemctl status

Or for a specific service e.g.:

# systemctl status networking

SaltStack

Running a command on specified minions

From the salt master:

salt 'host' cmd.run 'update-locale'

From the salt minion:

salt-call cmd.run 'update-locale'

Running a command on all minions

salt '*' cmd.run 'update-locale'

Running a specific state file

From the salt master:

salt $MINION_ID state.sls $STATE_FILE

From the salt minion:

salt-call state.sls $STATE_FILE

Listing active jobs

salt-run jobs.active

Listing available grains

salt 'example' grains.items

Listing available pillar

salt 'example' pillar.items

Reporting a grain value

e.g. for the 'mem_total' grain:

salt '*' grains.item mem_total

Passing a variable into a Jinja template from a salt state (SLS)

e.g.: to pass 'zabbix_deb_{pkg,url}' variables into the source.txt template:

/srv/zabbix/release/{{ zabbix_deb_pkg }}.txt:
  file.managed:
    - template: jinja
    - user: root
    - group: root
    - mode: 644
    - source: salt://file/srv/zabbix/release/source.txt
    - require:
      - file: /srv/zabbix/release
    - default:
      zabbix_deb_pkg: {{ zabbix_deb_pkg }}
      zabbix_deb_url: {{ zabbix_deb_url }}

KDE

Running user login script (X11/XOrg/XWindows)

A way to run user login scripts which works for KDE Plasma (and apparently other X.Org Server X Window System environments) is to create a *.desktop file in ~/.config/autostart/. For example I have a ~/.config/autostart/ssh-add.desktop file with the following contents to register my SSH key in the SSH Agent:

[Desktop Entry]
Type=Application
Name=ssh-add
Comment=Adds my private key to my session.
Exec=/usr/bin/konsole -e 'ssh-add /home/$USER/.ssh/id_rsa'

Standard KDE shortcut key bindings

Name Shortcut Command
Insert comment F1 xdotool type "$(date +%Y-%m-%d ) $USER - "
Insert sydtime F4 xdotool type "$(date +%Y-%m-%d-%H%M%S)"
Konsole Meta+T konsole
Dolphin Meta+E dolphin
Kate Ctrl+Shift+F12 kate
KCalc Ctrl+Shift+F11 kcalc
Firefox Ctrl+Shift+F10 firefox

Shutting down KDE/Plasma

# /etc/init.d/sddm stop

VirtualBox

Mounting a VirtualBox VDI file

Note: instead of doing this consider booting with a live CD.

See here:

Install qemu if necessary:

# apt install qemu

Then you'll need to load the network block device module:

# rmmod nbd
# modprobe nbd max_part=16

Attach the .vdi image to one of the nbd you just created:

# qemu-nbd -c /dev/nbd0 drive.vdi

Now you will get a /dev/nbd0 block device, along with several /dev/nbd0p* partition device nodes.

# mount /dev/nbd0p1 /mnt

Once you are done, unmount everything and disconnect the device:

# qemu-nbd -d /dev/nbd0

Elasticsearch

Report on health of your Elasticsearch cluster

$ curl http://localhost:9200/_cluster/health?pretty

Zabbix

Zabbix Agent on Mac OS X

Download and install agent.

Config file is here: /usr/local/etc/zabbix/zabbix_agentd.conf

Unload agent with:

# launchctl unload /Library/LaunchDaemons/com.zabbix.zabbix_agentd.plist

Load agent with:

# launchctl load /Library/LaunchDaemons/com.zabbix.zabbix_agentd.plist

To add a 'pki' group:

# dseditgroup -o create pki

To monitor syslog on Mac OS X:

# tail -f /var/log/system.log

Installing Zabbix Agent from source on Mac OS X

Download sources from https://www.zabbix.com/download_sources

$ brew update
$ brew install openssl
$ brew install pcre
jj5@condor:~/Desktop/zabbix-4.4.7$ ./configure --enable-agent --with-openssl=/usr/local/opt/openssl/
jj5@condor:~/Desktop/zabbix-4.4.7$ sudo make install

NetBeans

NetBeans shortcut keys

Keys Action
Ctrl+W Close active window
Alt+Shift+K Open in Terminal
Ctrl+U U Convert selected text to uppercase
Ctrl+U L Convert selected text to lowercase

XML

How to pretty-print an XML file

$ xmllint --format input.xml > output.xml

ApacheBench

Run a benchmark with ApacheBench

$ ab -n 1000 -c 100 https://www.example.com/