Difference between revisions of "John's Linux page"

From ProgClub
Jump to: navigation, search
(User and group management)
(Report memory type)
 
(74 intermediate revisions by the same user not shown)
Line 2: Line 2:
  
 
Note: I have some other disorganised notes on [http://www.jj5.net/sixsigma/UNIX UNIX], which include a few tips for MacOS. I also have some tips for [http://www.jj5.net/sixsigma/OS_X OS X].
 
Note: I have some other disorganised notes on [http://www.jj5.net/sixsigma/UNIX UNIX], which include a few tips for MacOS. I also have some tips for [http://www.jj5.net/sixsigma/OS_X OS X].
 +
 +
Note: the info on this page is probably Ubuntu (and Debian as an outside chance) specific, because I use Ubuntu pretty much everywhere these days.
 +
 +
You might also be interested in [[John's hacks]].
 +
 +
Quick jump to: [[#NetBeans|NetBeans]].
  
 
= System =
 
= System =
Line 13: Line 19:
 
  $ lsb_release
 
  $ lsb_release
  
== Determining which Unix you are running ==
+
== Determining which Linux/Unix you are running ==
  
 
  $ uname
 
  $ uname
 +
 +
Or,
 +
 +
$ uname -mrs
  
 
Or,
 
Or,
Line 48: Line 58:
  
 
  # dmidecode
 
  # dmidecode
 +
 +
Note that the dmidecode command (above) will give you information about your system's motherboard. For motherboard info look for 'System Information' and/or 'Base Board Information'.
  
 
Or the grand daddy of them all:
 
Or the grand daddy of them all:
Line 70: Line 82:
 
  RAID:      Devices: 1: /dev/md1 2: /dev/md0
 
  RAID:      Devices: 1: /dev/md1 2: /dev/md0
 
  Info:      Processes: 355 Uptime: 11 days Memory: 21198.3/32043.3MB Client: Shell (bash) inxi: 2.3.5
 
  Info:      Processes: 355 Uptime: 11 days Memory: 21198.3/32043.3MB Client: Shell (bash) inxi: 2.3.5
 +
 +
== Viewing syslog and other logs with KSystemLog ==
 +
 +
Run the 'KSystemLog' program under KDE for a handy log viewer GUI.
 +
 +
= Power =
 +
 +
== Reporting on PowerShield DEFENDER UPS status ==
 +
 +
To see the status of the [https://powershield.com.au/powersheild_product/defender/ PowerShield DEFENDER] systems on John's LAN:
 +
 +
$ upsc defender
 +
 +
E.g.:
 +
 +
jj5@orac:~$ upsc defender
 +
Init SSL without certificate database
 +
battery.charge: 100
 +
battery.voltage: 27.40
 +
battery.voltage.high: 26.00
 +
battery.voltage.low: 20.80
 +
battery.voltage.nominal: 24.0
 +
device.type: ups
 +
driver.name: blazer_usb
 +
driver.parameter.pollinterval: 2
 +
driver.parameter.port: auto
 +
driver.parameter.synchronous: no
 +
driver.version: 2.7.4
 +
driver.version.internal: 0.12
 +
input.current.nominal: 5.0
 +
input.frequency: 50.1
 +
input.frequency.nominal: 50
 +
input.voltage: 242.6
 +
input.voltage.fault: 242.6
 +
input.voltage.nominal: 240
 +
output.voltage: 242.6
 +
ups.beeper.status: disabled
 +
ups.delay.shutdown: 30
 +
ups.delay.start: 180
 +
ups.load: 14
 +
ups.productid: 5161
 +
ups.status: OL
 +
ups.type: offline / line interactive
 +
ups.vendorid: 0665
 +
 +
== Run commands on PowerShield DEFENDER UPS batteries ==
 +
 +
You can run "instant commands" using the '''upscmd''' command.
 +
 +
We use the 'beeper.toggle' instant command in our Salt Stack config to disable the beeper, see e.g.:
 +
 +
diligence:/srv/salt/conf/app/defender-1200.sls
 +
 +
To see "instant commands" supported by the PowerShield DEFENDER:
 +
 +
$ upscmd -l defender
 +
 +
E.g.:
 +
 +
jj5@orac:~$ upscmd -l defender
 +
Instant commands supported on UPS [defender]:
 +
 +
beeper.toggle - Toggle the UPS beeper
 +
load.off - Turn off the load immediately
 +
load.on - Turn on the load immediately
 +
shutdown.return - Turn off the load and return when power is back
 +
shutdown.stayoff - Turn off the load and remain off
 +
shutdown.stop - Stop a shutdown in progress
 +
test.battery.start - Start a battery test
 +
test.battery.start.deep - Start a deep battery test
 +
test.battery.start.quick - Start a quick battery test
 +
test.battery.stop - Stop the battery test
  
 
= Environment =
 
= Environment =
Line 181: Line 265:
 
  $ free -m
 
  $ free -m
  
= Video/display management =
+
== Check for swap thrashing ==
 +
 
 +
Check your virtual memory status with vmstat:
  
== Viewing EDID data for attached monitor ==
+
$ vmstat
  
To view [https://en.wikipedia.org/wiki/Extended_Display_Identification_Data EDID] data for an attached monitor (requires the [https://packages.debian.org/stable/main/edid-decode edid-decode] package):
+
== Report memory type ==
 +
 
 +
Report on RAM DIMMs:
 +
 
 +
# dmidecode --type 17
 +
 
 +
Report on RAM and CPU cache (including L1, L2, and L3):
 +
 
 +
# lshw -short -C memory
 +
 
 +
Or for more detail:
 +
 
 +
# lshw -C memory
 +
 
 +
= Video/display management =
 +
 
 +
== Viewing EDID data for attached monitor ==
 +
 
 +
To view [https://en.wikipedia.org/wiki/Extended_Display_Identification_Data EDID] data for an attached monitor (requires the [https://packages.debian.org/stable/main/edid-decode edid-decode] package):
  
 
  $ cd /sys/class/drm
 
  $ cd /sys/class/drm
Line 212: Line 316:
 
* press '1' (one) to toggle CPU aggregation
 
* press '1' (one) to toggle CPU aggregation
 
* press < and > to change the sort column
 
* press < and > to change the sort column
 +
 
== Changing memory reporting in 'top' ==
 
== Changing memory reporting in 'top' ==
  
Line 225: Line 330:
  
 
Press 'm' to switch between various display modes.
 
Press 'm' to switch between various display modes.
 +
 +
== Showing full command-line in 'top' ==
 +
 +
To see the full command-line for processes run with -c:
 +
 +
$ top -c
 +
 +
== Listing all processes currently running which were started in your current shell session ==
 +
 +
$ ps -fl
 +
 +
== Killing specific processes ==
 +
 +
# ps aux | grep -e "this\|that" | grep -v grep | tr -s " " | cut -d " " -f 2 | xargs kill -9
 +
 +
== Run a command for a specified time using timeout ==
 +
 +
$ timeout 3 ping jj5.net
  
 
= Disk management =
 
= Disk management =
 +
 +
== Creating a partition table ==
 +
 +
# parted /dev/xvdf
 +
 +
mktable msdos
 +
 +
== Creating a partition ==
 +
 +
# parted /dev/xvdf
 +
 +
u MiB
 +
mkpart primary 1 100%
 +
 +
== Creating an ext4 file-system ==
 +
 +
# mkfs.ext4 /dev/xvdf1
  
 
== Listing disk drives ==
 
== Listing disk drives ==
Line 330: Line 470:
 
| refcnt || reference count
 
| refcnt || reference count
 
|}
 
|}
 +
 +
== How to tell if zfs scrub is running ==
 +
 +
You can get the status from the "scan:" line from:
 +
 +
$ zpool status
  
 
== Measure data throughput ==
 
== Measure data throughput ==
Line 354: Line 500:
  
 
  # hddtemp /dev/sd[a-e]
 
  # hddtemp /dev/sd[a-e]
 +
 +
== Burning an ISO image to USB on Mac ==
 +
 +
First insert your USB key and find the appropriate disk with:
 +
 +
# diskutil list
 +
 +
Then unmount it with:
 +
 +
# diskutil unmountDisk /dev/disk4
 +
 +
Then copy ISO image with 'dd':
 +
 +
# dd if=ubuntu-18.04.1-desktop-amd64.iso of=/dev/disk4
 +
 +
You can get dd to report progress by sending it the SIGINFO signal:
 +
 +
# kill -s info 12345
 +
 +
== Listing all ext4 file systems ==
 +
 +
To see a list only of the mounted ext4 file systems:
 +
 +
# df -t ext4
 +
 +
== Report hierarchical file system mount points and mount options ==
 +
 +
$ findmnt
 +
 +
== Report the mount point for the current working directory ==
 +
 +
$ findmnt "$PWD"
  
 
= Monitoring disk I/O =
 
= Monitoring disk I/O =
Line 370: Line 548:
  
 
  # watch iostat -xd /dev/sd[abc]
 
  # watch iostat -xd /dev/sd[abc]
 +
 +
Or use groupings like this command for 'tact':
 +
 +
$ iostat -g system nvme0n1 -g fast sda sdb -g data sdc sdd -d 2
  
 
= Monitoring a system =
 
= Monitoring a system =
Line 382: Line 564:
 
  # top
 
  # top
  
= File management =
+
= Monitoring temperature =
  
== Listing only directories ==
+
See [https://askubuntu.com/a/854029 temperature without third-party apps] for:
  
  $ ls -l | egrep '^d'
+
  $ cat /sys/class/thermal/thermal_zone*/temp
  
== Listing only files ==
+
and:
  
  $ ls -l | egrep -v '^d'
+
  $ paste <(cat /sys/class/thermal/thermal_zone*/type) <(cat /sys/class/thermal/thermal_zone*/temp) | column -s $'\t' -t | sed 's/\(.\)..$/.\1°C/'
  
== Listing hidden files ==
+
== Monitoring CPU temperature ==
  
  $ ls -al .[!.]*
+
  $ watch sensors
  
== Creating a symbolic link ==
+
== Monitoring HDD temperature ==
  
$ ln -s /path/to/target link-name
+
For e.g. SATA drives sda to sdd:
  
== Creating a hard-link ==
+
# watch hddtemp /dev/sd[a-d]
 +
 
 +
= ZFS =
 +
 
 +
== How can I determine the current size of the ARC in ZFS, and how does the ARC relate to free or cache memory? ==
  
$ ln /path/to/target file-name
+
See [https://superuser.com/q/1137416 How can I determine the current size of the ARC in ZFS, and how does the ARC relate to free or cache memory?]
  
== Changing the owner of a file ==
+
$ cat /proc/spl/kstat/zfs/arcstats
  
$ chown user:group <files>
+
Then:
  
E.g.
+
c is the target size of the ARC in bytes
 +
c_max is the maximum size of the ARC in bytes
 +
size is the current size of the ARC in bytes
  
$ chown jj5:staff README
+
== Stopping a ZFS scrub in progress ==
$ chown root:root *
 
  
To apply recursively into sub-directories use -R,
+
# zpool scrub -s $pool
  
$ chown -R root:root /etc/*
+
e.g. for the 'data' pool:
  
== Changing file permissions ==
+
# zpool scrub -s data
  
{|class="wikitable"
+
= File management =
|+ Object codes
 
! User !! Group !! Other
 
|-
 
| u    || g    || o
 
|}
 
  
{|class="wikitable"
+
== Listing files by size ==
|+ Permission codes
 
! Read !! Write !! Exectue
 
|-
 
| r    || w    || x
 
|-
 
| 4    || 2    || 1
 
|}
 
  
{|class="wikitable"
+
Use capital S for Size:
|+ Numeric codes
 
! 0
 
| None
 
|-
 
! 1
 
| Execute
 
|-
 
! 2
 
| Write
 
|-
 
! 3
 
| Write, Execute
 
|-
 
! 4
 
| Read
 
|-
 
! 5
 
| Read, Execute
 
|-
 
! 6
 
| Read, Write
 
|-
 
! 7
 
| Read, Write, Execute
 
|}
 
  
See [http://catcode.com/teachmod/numeric2.html Numeric Mode in Action].
+
$ ls -S
  
$ chmod <user numeric code><group numeric code><other numeric code> <files>
+
== Listing only directories ==
$ chmod <object codes>+|-<permission codes> <files>
 
  
E.g.
+
$ ls -l | egrep '^d'
  
$ chmod 600 my-private-file
+
== Listing only files ==
$ chmod go-rwx my-private-file
 
$ chmod u+rw my-private-file
 
$ chmod +x my-script
 
  
== Updating config files ==
+
$ ls -l | egrep -v '^d'
  
If you get given a new config file called new.conf and you want to integrate it with your old config file old.conf then:
+
== Listing hidden files ==
  
  $ cp old.conf updated.conf
+
  $ ls -al .[!.]*
$ merge -A updated.conf new.conf old.conf
 
  
Then go through and edit updated.conf resolving all the merge errors, picking and choosing what to update and what to keep. When you're done copy updated.conf to old.conf so it becomes the new config file.
+
== Creating a symbolic link ==
  
The merge program is a part of the RCS package. If you don't have it:
+
$ ln -s /path/to/target link-name
  
$ sudo apt-get install rcs
+
== Creating a hard-link ==
  
== Listing open files ==
+
$ ln /path/to/target file-name
  
Use lsof to list open files. E.g.:
+
== Changing the owner of a file ==
  
  # lsof
+
  $ chown user:group <files>
  
See man lsof for options.
+
E.g.
  
== List permissions on a whole directory path ==
+
$ chown jj5:staff README
 +
$ chown root:root *
  
E.g.:
+
To apply recursively into sub-directories use -R,
  
  $ namei -om /home/jj5/workspace
+
  $ chown -R root:root /etc/*
  
Outputs:
+
== Changing file permissions ==
  
f: /home/jj5/workspace/
+
{|class="wikitable"
  drwxr-xr-x root root /
+
|+ Object codes
  drwxr-xr-x root root home
+
! User !! Group !! Other
  drwxr-xr-x jj5  jj5  jj5
+
|-
  drwxr-xr-x jj5  jj5  workspace
+
| u    || g    || o
 +
|}
  
== Counting non-blank lines in a file ==
+
{|class="wikitable"
 +
|+ Permission codes
 +
! Read !! Write !! Exectue
 +
|-
 +
| r    || w    || x
 +
|-
 +
| 4    || 2    || 1
 +
|}
  
E.g.:
+
{|class="wikitable"
 
+
|+ Numeric codes
$ cat foo.c | sed '/^\s*$/d' | wc -l
+
! 0
 +
| None
 +
|-
 +
! 1
 +
| Execute
 +
|-
 +
! 2
 +
| Write
 +
|-
 +
! 3
 +
| Write, Execute
 +
|-
 +
! 4
 +
| Read
 +
|-
 +
! 5
 +
| Read, Execute
 +
|-
 +
! 6
 +
| Read, Write
 +
|-
 +
! 7
 +
| Read, Write, Execute
 +
|}
  
== Cloning one directory to another with rsync ==
+
See [http://catcode.com/teachmod/numeric2.html Numeric Mode in Action].
  
E.g.:
+
$ chmod <user numeric code><group numeric code><other numeric code> <files>
 +
$ chmod <object codes>+|-<permission codes> <files>
  
rsync --acls --xattrs --stats --human-readable --recursive --del --force --times --links --hard-links --executability --numeric-ids --owner --group --perms --sparse --compress-level=0 /data/source/ hostname:/data/target/
+
E.g.
  
== Counting number of files in current directory and all subdirectories ==
+
$ chmod 600 my-private-file
 +
$ chmod go-rwx my-private-file
 +
$ chmod u+rw my-private-file
 +
$ chmod +x my-script
  
$ ls -AlhR . | egrep '^-' | wc -l
+
== Updating config files ==
  
== Counting number of directories in current directory and all subdirectories ==
+
If you get given a new config file called new.conf and you want to integrate it with your old config file old.conf then:
  
  $ ls -AlhR . | egrep '^d' | wc -l
+
  $ cp old.conf updated.conf
 +
$ merge -A updated.conf new.conf old.conf
  
= Symbolic-link management =
+
Then go through and edit updated.conf resolving all the merge errors, picking and choosing what to update and what to keep. When you're done copy updated.conf to old.conf so it becomes the new config file.
  
== Data used by sym-linked files:
+
The merge program is a part of the RCS package. If you don't have it:
  
This will de-reference the sym-links in the current directory and tell you how much data the files pointed to by the sym-links are using:
+
$ sudo apt-get install rcs
  
jj5@tact:/data/backup/unity/latest$ du -hD * | sort -h
+
== Listing open files ==
  
= File searching =
+
Use lsof to list open files. E.g.:
  
== Finding a file with a particular name ==
+
# lsof
  
$ find -iname "*some-part-of-the-file-name*"
+
See man lsof for options.
  
Will start searching from the current directory, so maybe
+
== List permissions on a whole directory path ==
  
$ cd /
+
E.g.:
  
first. For a case-sensitive search:
+
$ namei -om /home/jj5/workspace
  
$ find -name "*eXaCT CaSE*"
+
Outputs:
  
== Finding a file with particular content ==
+
f: /home/jj5/workspace/
 +
  drwxr-xr-x root root /
 +
  drwxr-xr-x root root home
 +
  drwxr-xr-x jj5  jj5  jj5
 +
  drwxr-xr-x jj5  jj5  workspace
  
To search in /etc/ for a file with particular content:
+
== Counting non-blank lines in a file ==
  
$ grep -R "search-string" /etc/*
+
E.g.:
  
To search the current directory for *.cs files containing the word "Up":
+
$ cat foo.c | sed '/^\s*$/d' | wc -l
  
$ find . -name '*.cs' -exec grep --color=auto -H Up {} \;
+
== Cloning one directory to another with rsync ==
  
== Finding a list of files with particular content ==
+
E.g.:
  
E.g. to find all the files with the word 'creativity':
+
rsync --acls --xattrs --stats --human-readable --recursive --del --force --times --links --hard-links --executability --numeric-ids --owner --group --perms --sparse --compress-level=0 /data/source/ hostname:/data/target/
  
$ grep -R creativity . | sed 's/:/ /' | awk '{ print $1 }' | sort | uniq
+
== Counting number of files in current directory and all subdirectories ==
  
== Using the locate command to find files ==
+
$ ls -AlhR . | egrep '^-' | wc -l
  
$ locate part-of-filename
+
== Counting number of directories in current directory and all subdirectories ==
  
E.g.
+
$ ls -AlhR . | egrep '^d' | wc -l
  
$ locate texvc
+
== Getting the status of a 'dd' process ==
  
== Updating locate command's database ==
+
First figure out the 'dd' process number, with e.g. 'top' or 'ps aux | grep dd'
  
# updatedb
+
Then send the dd process the SIGINFO signal, which for dd process 40947 would be:
  
= Job control =
+
# kill -s info 40947
  
== Stopping a running process ==
+
The dd process will report its status in the terminal its running in.
  
Press Ctrl+Z to stop a running process.
+
== Transferring a large file via FAT32 file system ==
  
== Listing current jobs and their status ==
+
So the maximum file size supported by a FAT32 file system (commonly used on USB keys) is 4 GB per file. If you have a file larger than 4 GB you can split it into parts and then reassemble the parts once transferred:
  
  $ jobs
+
  $ split -b 4000m input.tgz input.tgz-parts-
  
== Resuming a stopped job in the backgroud ==
+
Then copy the small files and reassemble:
  
To resume a stopped process in the background
+
$ cat input.tgz-parts-* > output.tgz
  
$ bg %1
+
= NFS =
  
where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').
+
== List NFS shares ==
  
== Resuming a stopped job in the foreground ==
+
To e.g. show NFS shares on 'love':
  
To resume a stopped process in the foreground
+
$ showmount -e love
  
$ fg %1
+
= Compression =
  
where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').
+
== How to use pigz with tar ==
  
== Killing a stopped job ==
+
See [https://stackoverflow.com/a/39904353 here]:
  
To kill a job
+
$ tar cf - paths-to-archive | pigz --best -p 8 > archive.tgz
  
$ kill %1
+
Note: don't use --best unless you're being stingy, running without it will be much faster.
  
where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').
+
Also from [https://stackoverflow.com/a/50586833 here]:
  
== Periodically run a program and watch its output ==
+
Fast pack:
  
  $ watch /your/command
+
  tar -I 'pigz --fast' -cf my.tar.gz whatver
  
= Debian/Ubuntu package management =
+
Best pack:
  
Also see [https://wiki.debian.org/WhereIsIt Where "is" it?] on the Debian Wiki.
+
tar -I 'pigz --best' -cf my.tar.gz whatver
  
== configuring debconf ==
+
Fast unpack:
  
  # dpkg-reconfigure debconf
+
  tar -I pigz -xf my.tar.gz
  
Set priority to low to get asked detailed questions.
+
== Best compression with tar ==
  
== Showing list of installed packages ==
+
From [https://superuser.com/questions/514260/how-to-obtain-maximum-compression-with-tar-gz#544643 here]:
  
  # dpkg --get-selections
+
  export GZIP=-9
 +
tar cvzf file.tar.gz /path/to/directory
  
== Searching for installed package ==
+
or
  
  # dpkg --get-selections | grep package-name
+
  env GZIP=-9 tar cvzf file.tar.gz /path/to/directory
  
or
+
== Best parallel compression with pigz ==
  
  # aptitude search package-name
+
  $ pigz --best
  
== Showing which files are installed as part of a package ==
+
== Best parallel compression with xz ==
  
  # dpkg -L package-name
+
  $ xz -9e -T 0
  
== Installing a package ==
+
== Reporting compression ratios with xz ==
  
# apt-get install package-name
+
e.g.
  
== Uninstalling a package ==
+
root@love:/data/image/archive# xz -l *
 +
Strms  Blocks  Compressed Uncompressed  Ratio  Check  Filename
 +
    1      3    372.2 MiB    442.3 MiB  0.841  CRC64  1999.txz
 +
    1      29  5,281.3 MiB  5,542.5 MiB  0.953  CRC64  2001.txz
 +
    1      11  1,364.3 MiB  2,084.3 MiB  0.655  CRC64  2002.txz
 +
    1      9    568.5 MiB  1,660.2 MiB  0.342  CRC64  2003.txz
 +
    1    639    66.8 GiB    119.6 GiB  0.558  CRC64  2004.txz
 +
    1    313    12.7 GiB    58.6 GiB  0.217  CRC64  2005.txz
 +
    1    414    35.0 GiB    77.4 GiB  0.452  CRC64  2006.txz
 +
    1    485    44.5 GiB    90.9 GiB  0.490  CRC64  2007.txz
 +
    1  1,690    150.0 GiB    316.8 GiB  0.473  CRC64  2008.txz
 +
    1      3    457.9 MiB    526.0 MiB  0.871  CRC64  2009.txz
 +
    1    168    27.3 GiB    31.4 GiB  0.868  CRC64  2010.txz
 +
    1      4    477.1 MiB    702.8 MiB  0.679  CRC64  2011.txz
 +
-------------------------------------------------------------------------------
 +
    12  3,768    344.6 GiB    705.5 GiB  0.488  CRC64  12 files
  
# apt-get remove package-name
+
= Symbolic-link management =
  
== Showing system architecture ==
+
== Data used by sym-linked files:
  
$ dpkg --print-architecture
+
This will de-reference the sym-links in the current directory and tell you how much data the files pointed to by the sym-links are using:
  
== Showing which package a file belongs to ==
+
jj5@tact:/data/backup/unity/latest$ du -hD * | sort -h
  
$ which echo
+
= File searching =
/bin/echo
 
$ dpkg -S /bin/echo
 
coreutils: /bin/echo
 
$ dpkg -l | grep coreutils
 
ii  coreutils                        6.10-6                  The GNU core utilities
 
  
== Showing package information ==
+
== Finding a file with a particular name ==
  
  $ apt-cache showpkg coreutils
+
  $ find -iname "*some-part-of-the-file-name*"
  
Or for even more information:
+
Will start searching from the current directory, so maybe
  
  $ apt-cache show coreutils
+
  $ cd /
  
== List all installed packages with package version info ==
+
first. For a case-sensitive search:
  
  dpkg-query -l
+
  $ find -name "*eXaCT CaSE*"
  
== Reporting which version of a package is installed ==
+
== Finding a file with particular content ==
  
$ dpkg -l | grep package-name
+
To search in /etc/ for a file with particular content:
  
E.g.:
+
$ grep -R "search-string" /etc/*
  
root@hope:~/letsencrypt# dpkg -l | grep augeas
+
To search the current directory for *.cs files containing the word "Up":
ii  augeas-lenses                  0.7.0-1ubuntu1                Set of lenses needed by libaugeas0 to parse
 
ii  libaugeas0                      0.7.0-1ubuntu1                The augeas configuration editing library and
 
  
== Comprehensive upgrade ==
+
$ find . -name '*.cs' -exec grep --color=auto -H Up {} \;
  
Try the following:
+
== Finding a list of files with particular content ==
  
# apt-get update
+
E.g. to find all the files with the word 'creativity':
# apt-get dist-upgrade
 
# apt-get autoremove
 
# apt-get remove $(deborphan)
 
# update-flashplugin-nonfree --install
 
  
== Searching all available packages ==
+
$ grep -R creativity . | sed 's/:/ /' | awk '{ print $1 }' | sort | uniq
  
$ apt-cache search . | sort -d | less
+
== Using the locate command to find files ==
  
= Networking =
+
$ locate part-of-filename
  
== net-tools vs iproute2 ==
+
E.g.
  
The older 'net-tools' package has been replaced with 'iproute2' e.g. in [https://www.debian.org/releases/stretch/amd64/release-notes/ch-information.en.html#iproute2 stretch].
+
$ locate texvc
  
{|class="wikitable"
+
== Updating locate command's database ==
! legacy net-tools commands
 
! iproute2 replacement commands
 
|-
 
| arp      || ip n (ip neighbor)
 
|-
 
| ifconfig || ip a (ip addr), ip link, ip -s (ip -stats)
 
|-
 
| iptunnel || ip tunnel
 
|-
 
| iwconfig || iw
 
|-
 
| nameif  || ip link, ifrename
 
|-
 
| netstat  || ss, ip route (for netstat-r), ip -s link (for netstat -i), ip maddr (for netstat-g)
 
|-
 
| route    || ip r (ip route)
 
|}
 
  
== Restart networking ==
+
# updatedb
  
For servers:
+
== Select a random line from a text file ==
  
  # service networking restart
+
  $ shuf -n 1 input.txt
  
For desktops:
+
== Extra context for grep ==
  
# service network-manager restart
+
If you need to show extra lines before or after your grep results use -B NUM to set how many lines before the match and -A NUM for the number of lines after the match:
  
== Pinging with particular packet size ==
+
$ grep -B 3 -A 1 ...
  
$ ping -M do -s <packet size in bytes> <host>
+
= Job control =
  
E.g.
+
== Stopping a running process ==
  
$ ping -M do -s 1400 charity.progclub.org
+
Press Ctrl+Z to stop a running process.
  
== Setting [http://en.wikipedia.org/wiki/Maximum_segment_size MSS] for a particular IP address on a particular interface ==
+
== Listing current jobs and their status ==
  
  # ip route add <host> dev <interface> advmss <packet size>
+
  $ jobs
  
E.g.
+
== Resuming a stopped job in the backgroud ==
  
# ip route add 10.0.0.1 dev eth0 advmss 1400
+
To resume a stopped process in the background
  
== Dropping configured MMS for a particular IP address ==
+
$ bg %1
  
# ip route flush <host>
+
where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').
  
E.g.
+
== Resuming a stopped job in the foreground ==
  
# ip route flush 10.0.0.1
+
To resume a stopped process in the foreground
  
== Listing open ports and socket information ==
+
$ fg %1
  
Including which process is listening on which port.
+
where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').
  
# netstat -tulpn
+
== Killing a stopped job ==
  
Or use the 'ss' command:
+
To kill a job
  
  # ss -s
+
  $ kill %1
# ss -l
 
# ss -pl
 
# ss -o state established '( dport = :smtp or sport = :smtp )'
 
  
== Listing open IPv4 connections ==
+
where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').
  
# lsof -Pnl +M -i4
+
== Periodically run a program and watch its output ==
  
You might need to install the lsof package:
+
$ watch /your/command
  
# apt-get install lsof
+
= Debian/Ubuntu package management =
  
== Query for DNS MX record ==
+
Also see [https://wiki.debian.org/WhereIsIt Where "is" it?] on the Debian Wiki.
  
$ nslookup
+
== configuring debconf ==
> server 127.0.0.1
 
> set q=mx
 
> mail.blackbrick.com
 
  
== Query for DNS SOA record ==
+
# dpkg-reconfigure debconf
  
$ dig @ns2.staticmagic.net -t SOA staticmagic.net
+
Set priority to low to get asked detailed questions.
  
== Using nmap to list open ports on remote host ==
+
== Showing list of installed packages ==
  
To check the 1,000 most common ports:
+
# dpkg --get-selections
  
# nmap server.example.com
+
== Searching for installed package ==
  
Or for a specific port range (e.g. 101 to 102):
+
# dpkg --get-selections | grep package-name
  
# nmap -p 101-102 server.example.com
+
or
  
Or for all ports (1 to 65,535):
+
# aptitude search package-name
  
# nmap -p- server.example.com
+
== Showing which files are installed as part of a package ==
  
== Network monitoring ==
+
# dpkg -L package-name
  
See [http://www.binarytides.com/linux-commands-monitor-network/ here] for details. Basically:
+
== Installing a package ==
  
# Overall bandwidth: nload, bmon, slurm, bwm-ng, cbm, speedometer, netload
+
# apt-get install package-name
# Overall bandwidth (batch style output): vnstat, ifstat, dstat, collectl
 
# Bandwidth per socket connection: iftop, iptraf, tcptrack, pktstat, netwatch, trafshow
 
# Bandwidth per process: nethogs
 
  
== nload ==
+
== Uninstalling a package ==
  
You can watch network traffic in real-time with nload:
+
# apt-get remove package-name
  
# nload -u M
+
== Showing system architecture ==
  
== Reporting network (NIC) speed ==
+
$ dpkg --print-architecture
  
From [https://askubuntu.com/questions/431911/how-can-i-verify-the-speed-of-my-nic-in-ubuntu#431912 here]:
+
== Showing which package a file belongs to ==
  
  # dmesg | grep eth0
+
  $ which echo
  # mii-tool -v eth0
+
/bin/echo
  # ethtool eth0
+
  $ dpkg -S /bin/echo
 +
coreutils: /bin/echo
 +
$ dpkg -l | grep coreutils
 +
  ii  coreutils                        6.10-6                  The GNU core utilities
  
Note: use ifconfig to get device name.
+
== Showing package information ==
  
== Path MTU discovery ==
+
$ apt-cache showpkg coreutils
  
To do a [https://en.wikipedia.org/wiki/Path_MTU_Discovery Path MTU Discovery], from the iputils-tracepath package:
+
Or for even more information:
  
  # tracepath host.example.com
+
  $ apt-cache show coreutils
  
== Listing available Ethernet devices ==
+
== List all installed packages with package version info ==
  
To see a list of NICs available on the host:
+
dpkg-query -l
  
$ cat /proc/net/dev
+
== Reporting which version of a package is installed ==
  
Also
+
$ dpkg -l | grep package-name
  
$ ip link
+
E.g.:
  
== Links ==
+
root@hope:~/letsencrypt# dpkg -l | grep augeas
 +
ii  augeas-lenses                  0.7.0-1ubuntu1                Set of lenses needed by libaugeas0 to parse
 +
ii  libaugeas0                      0.7.0-1ubuntu1                The augeas configuration editing library and
  
* [http://www.cyberciti.biz/faq/linux-unix-open-ports/ HowTo: UNIX / Linux Open TCP / UDP Ports]
+
== Comprehensive upgrade ==
  
= IPTables =
+
Try the following:
  
== Applying firewall rules ==
+
# apt-get update
 +
# apt-get dist-upgrade
 +
# apt-get autoremove
 +
# apt-get remove $(deborphan)
 +
# update-flashplugin-nonfree --install
  
For configuration info see [http://articles.slicehost.com/2008/4/25/ubuntu-hardy-setup-page-1 this article].
+
== Searching all available packages ==
  
  $ sudo vim /etc/iptables.test.rules
+
  $ apt-cache search . | sort -d | less
$ sudo /sbin/iptables -F
 
$ sudo /sbin/iptables-restore < /etc/iptables.test.rules
 
$ sudo iptables -L
 
$ sudo -s
 
# iptables-save > /etc/iptables.up.rules
 
# exit
 
  
= ufw =
+
= Networking =
  
== Denying hosts with ufw ==
+
== net-tools vs iproute2 ==
  
See [[Admin_reference#Denying_hosts_with_UFW|denying hosts with ufw]].
+
The older 'net-tools' package has been replaced with 'iproute2' e.g. in [https://www.debian.org/releases/stretch/amd64/release-notes/ch-information.en.html#iproute2 stretch].
  
= Bind9 =
+
{|class="wikitable"
 +
! legacy net-tools commands
 +
! iproute2 replacement commands
 +
|-
 +
| arp      || ip n (ip neighbor)
 +
|-
 +
| ifconfig || ip a (ip addr), ip link, ip -s (ip -stats)
 +
|-
 +
| iptunnel || ip tunnel
 +
|-
 +
| iwconfig || iw
 +
|-
 +
| nameif  || ip link, ifrename
 +
|-
 +
| netstat  || ss, ip route (for netstat-r), ip -s link (for netstat -i), ip maddr (for netstat-g)
 +
|-
 +
| route    || ip r (ip route)
 +
|}
  
== Viewing Bind9 querylog ==
+
== Restart networking ==
  
$ sudo rndc querylog
+
For servers:
$ tail -f /var/log/syslog
 
  
= IPSec =
+
# service networking restart
  
== Disabling IPSec ==
+
For desktops:
  
  # setkey -FP
+
  # service network-manager restart
  
= OpenSSL =
+
== Pinging with particular packet size ==
  
== Debugging IMAPS with OpenSSL ==
+
$ ping -M do -s <packet size in bytes> <host>
  
# openssl s_client -connect localhost:993
+
E.g.
> a1 LOGIN username@host password
 
> a2 LOGOUT
 
  
== Debugging HTTPS with OpenSSL ==
+
$ ping -M do -s 1400 charity.progclub.org
  
$ openssl s_client -connect www.example.com:443
+
== Setting [http://en.wikipedia.org/wiki/Maximum_segment_size MSS] for a particular IP address on a particular interface ==
GET /example.html HTTP/1.1
 
host: www.example.com
 
  
== Links ==
+
# ip route add <host> dev <interface> advmss <packet size>
  
* [http://www.madboa.com/geek/openssl/ OpenSSL Command-Line HOWTO]
+
E.g.
  
= Pluggable Authentication Modules (PAM) =
+
# ip route add 10.0.0.1 dev eth0 advmss 1400
  
== Links ==
+
== Dropping configured MMS for a particular IP address ==
  
* [http://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-pam.html 42.4. Pluggable Authentication Modules (PAM)]
+
# ip route flush <host>
  
= SSH =
+
E.g.
  
== Configuring SSH key login ==
+
# ip route flush 10.0.0.1
  
On the client machine generate a key-pair (if necessary, check for existing ~/.ssh/id_rsa.pub):
+
== Listing open ports and socket information ==
  
$ ssh-keygen -t rsa
+
Including which process is listening on which port.
  
Copy the public key from the client to the server:
+
# netstat -tulpn
  
$ scp ~/.ssh/id_rsa.pub user@example.org:
+
Or use the 'ss' command:
  
Configure the authorized keys on the server:
+
# ss -s
 +
# ss -l
 +
# ss -pl
 +
# ss -o state established '( dport = :smtp or sport = :smtp )'
  
$ ssh user@example.org
+
== Listing open IPv4 connections ==
$ mkdir ~/.ssh
 
$ chmod go-w .ssh
 
$ cat ~/id_rsa.pub >> ~/.ssh/authorized_keys
 
$ chmod 600 ~/.ssh/authorized_keys
 
$ rm ~/id_rsa.pub
 
  
== Tunneling over SSH ==
+
# lsof -Pnl +M -i4
  
For example, connecting a remote MySQL server to the localhost:
+
You might need to install the lsof package:
  
  $ ssh -L 3306:localhost:3306 jselliot@ssh.progsoc.org
+
  # apt-get install lsof
  
If the machine you want to connect to is not the localhost of the machine you're ssh'ing to,
+
== Query for DNS MX record ==
  
  $ ssh -L 3306:muspell.progsoc.uts.edu.au:3306 ssh.progsoc.uts.edu.au
+
$ nslookup
 +
> server 127.0.0.1
 +
> set q=mx
 +
> mail.blackbrick.com
  
The -L stanza is localport:remotehost:remoteport where localport is a
+
== Query for DNS SOA record ==
port on your machine, forwarded to remoteport on remotehost.
+
 
 +
$ dig @ns2.staticmagic.net -t SOA staticmagic.net
  
== Tunneling over SSH with PuTTY ==
+
== Using nmap to list open ports on remote host ==
  
See [http://www.anchor.com.au/hosting/support/MySQL/Connecting_to_mysql_remotely Connecting to the MySQL database remotely (via an SSH Tunnel)]
+
To check the 1,000 most common ports:
  
* run putty.exe
+
# nmap server.example.com
* Connection -> SSH -> Tunnels
 
** Port forwarding: source port to 3306
 
** destination: 127.0.0.1:3306
 
** check Local
 
** click Add
 
  
== Enabling verbose SSH logging ==
+
Or for a specific port range (e.g. 101 to 102):
  
To see what's going on with your ssh connections,
+
# nmap -p 101-102 server.example.com
  
$ ssh -v user@host
+
Or for all ports (1 to 65,535):
  
Or
+
# nmap -p- server.example.com
  
$ ssh -vv user@host
+
== Network monitoring ==
  
== Unlocking SSH key for session ==
+
See [http://www.binarytides.com/linux-commands-monitor-network/ here] for details. Basically:
  
jj5@orac:~/.config/autostart$ cat ssh-add.desktop
+
# Overall bandwidth: nload, bmon, slurm, bwm-ng, cbm, speedometer, netload
[Desktop Entry]
+
# Overall bandwidth (batch style output): vnstat, ifstat, dstat, collectl
Type=Application
+
# Bandwidth per socket connection: iftop, iptraf, tcptrack, pktstat, netwatch, trafshow
Name=ssh-add
+
# Bandwidth per process: nethogs
Comment=Adds my private key to my session.
 
Exec=/usr/bin/konsole -e 'ssh-add /home/$USER/.ssh/id_rsa'
 
  
== Links ==
+
== nload ==
  
* [http://blogs.perl.org/users/smylers/2011/08/ssh-productivity-tips.html SSH Can Do That? Productivity Tips for Working with Remote Servers]
+
You can watch network traffic in real-time with nload:
* [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html PuTTY Download Page]
 
  
= Standard IO =
+
# nload -u M
  
== cat EOF ==
+
== Reporting network (NIC) speed ==
  
$ cat > output <<EOF
+
From [https://askubuntu.com/questions/431911/how-can-i-verify-the-speed-of-my-nic-in-ubuntu#431912 here]:
> text
 
> EOF
 
  
  $ cat output
+
  # dmesg | grep eth0
  text
+
  # mii-tool -v eth0
 +
# ethtool eth0
  
= Script =
+
Note: use ifconfig to get device name.
  
== Creating a session log with script ==
+
== Path MTU discovery ==
  
$ script -t 2> timing
+
To do a [https://en.wikipedia.org/wiki/Path_MTU_Discovery Path MTU Discovery], from the iputils-tracepath package:
  
The session log is in the file 'typescript' and the timing data is in 'timing'.
+
# tracepath host.example.com
  
== Replaying a scripted session ==
+
== Listing available Ethernet devices ==
  
$ scriptreplay timing
+
To see a list of NICs available on the host:
  
Uses the default file 'typescript' and the 'timing' file as specified.
+
$ cat /proc/net/dev
  
= Screen =
+
Also
  
== Creating a new screen or reconnecting to a detached screen ==
+
$ ip link
  
$ screen -R
+
== 59 Linux Networking commands and scripts ==
  
== Detaching a screen ==
+
See [https://haydenjames.io/linux-networking-commands-scripts/ 59 Linux Networking commands and scripts].
  
$ screen -D
+
== Links ==
  
== Reconnecting to screen ==
+
* [http://www.cyberciti.biz/faq/linux-unix-open-ports/ HowTo: UNIX / Linux Open TCP / UDP Ports]
  
$ screen -D
+
= IPTables =
$ screen -R
 
  
I have a script in ~/bin/reconnect like so,
+
== Applying firewall rules ==
  
#!/bin/bash
+
For configuration info see [http://articles.slicehost.com/2008/4/25/ubuntu-hardy-setup-page-1 this article].
screen -D
 
screen -R
 
  
This will detach your last screen, and reconnect it on the current terminal.
+
$ sudo vim /etc/iptables.test.rules
 +
$ sudo /sbin/iptables -F
 +
$ sudo /sbin/iptables-restore < /etc/iptables.test.rules
 +
$ sudo iptables -L
 +
$ sudo -s
 +
# iptables-save > /etc/iptables.up.rules
 +
# exit
  
== Scrolling in screen ==
+
= ufw =
  
See [https://www.saltycrane.com/blog/2008/01/how-to-scroll-in-gnu-screen/ How to scroll in GNU Screen]. Basically press Ctrl+A ESC then use Page Up and Page Down. Press ESC again to exit copy mode. As usual you can use Ctrl+[ in place of ESC.
+
== Denying hosts with ufw ==
  
= Vim =
+
See [[Admin_reference#Denying_hosts_with_UFW|denying hosts with ufw]].
  
== First, why Vim? ==
+
= Bind9 =
  
Read [http://www.viemu.com/a-why-vi-vim.html Why, oh WHY, do those #?@! nutheads use vi?]
+
== Viewing Bind9 querylog ==
  
== Visual modes ==
+
$ sudo rndc querylog
 +
$ tail -f /var/log/syslog
  
Use 'v' for visual mode, 'V' for visual line mode and Ctrl+V for visual block mode.
+
= IPSec =
  
== Configuring spaces instead of tabs ==
+
== Disabling IPSec ==
  
I use two spaces instead of tabs. To configure, edit your .vimrc file:
+
# setkey -FP
  
$ vim ~/.vimrc
+
= OpenSSL =
  
and include the following lines:
+
== Debugging IMAPS with OpenSSL ==
  
  set tabstop=2
+
  # openssl s_client -connect localhost:993
  set shiftwidth=2
+
  > a1 LOGIN username@host password
  set expandtab
+
  > a2 LOGOUT
  
== Configuring syntax highlighting ==
+
== Debugging HTTPS with OpenSSL ==
  
See [http://www.cyberciti.biz/faq/turn-on-or-off-color-syntax-highlighting-in-vi-or-vim/ here].
+
$ openssl s_client -connect www.example.com:443
 +
GET /example.html HTTP/1.1
 +
host: www.example.com
  
Use:
+
== Links ==
  
:syntax on
+
* [http://www.madboa.com/geek/openssl/ OpenSSL Command-Line HOWTO]
  
to turn on syntax highlighting.
+
= Pluggable Authentication Modules (PAM) =
  
Use:
+
== Links ==
  
:syntax off
+
* [http://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-pam.html 42.4. Pluggable Authentication Modules (PAM)]
  
to turn off syntax highlighting.
+
= SSH =
  
To always use syntax highlighting:
+
== Configuring SSH key login ==
  
$ vim ~/.vimrc
+
On the client machine generate a key-pair (if necessary, check for existing ~/.ssh/id_rsa.pub):
  
and add:
+
$ ssh-keygen -t rsa
  
syntax on
+
Copy the public key from the client to the server:
  
To get a list of supported colour schemes open vim and type:
+
$ scp ~/.ssh/id_rsa.pub user@example.org:
  
:colorscheme[space][Ctrl+D]
+
Configure the authorized keys on the server:
  
To always use a particular colorscheme edit ~/.vimrc and add (for example):
+
$ ssh user@example.org
 +
$ mkdir ~/.ssh
 +
$ chmod go-w .ssh
 +
$ cat ~/id_rsa.pub >> ~/.ssh/authorized_keys
 +
$ chmod 600 ~/.ssh/authorized_keys
 +
$ rm ~/id_rsa.pub
  
colorscheme desert
+
== Tunneling over SSH ==
  
== Inserting a TAB character when expandtab is on ==
+
For example, connecting a remote MySQL server to the localhost:
  
The problem here is that you have configured vim to insert spaces, but for a particular file (e.g. a Makefile) you need to insert a character.
+
$ ssh -L 3306:localhost:3306 jselliot@ssh.progsoc.org
  
Press Ctrl+V TAB to insert a literal tab character.
+
If the machine you want to connect to is not the localhost of the machine you're ssh'ing to,
  
Or you can disable tab expansion altogether with:
+
  $ ssh -L 3306:muspell.progsoc.uts.edu.au:3306 ssh.progsoc.uts.edu.au
  
:set expandtab!
+
The -L stanza is localport:remotehost:remoteport where localport is a
 +
port on your machine, forwarded to remoteport on remotehost.
  
== Changing 2 space indent to 4 space indent (e.g. for python files) ==
+
== Tunneling over SSH with PuTTY ==
  
:%s/^\s*/&&/g
+
See [http://www.anchor.com.au/hosting/support/MySQL/Connecting_to_mysql_remotely Connecting to the MySQL database remotely (via an SSH Tunnel)]
  
For more information [https://www.progclub.org/blog/2013/08/10/vim-reformat-a-python-file-to-have-4-space-indentations/ see here].
+
* run putty.exe
 +
* Connection -> SSH -> Tunnels
 +
** Port forwarding: source port to 3306
 +
** destination: 127.0.0.1:3306
 +
** check Local
 +
** click Add
  
== Recording and replaying a macro ==
+
== Enabling verbose SSH logging ==
  
To record a macro press 'q' and then a number between 1 and 9. E.g. press "q1". The macro is now recording. When you've finished issuing your commands press 'q' again to finish recording. To replay a macro press '@' followed by the number of the macro. That is, if you pressed "q1" to record the macro, press "@1" to replay the macro. To replay the last macro again press "@@".
+
To see what's going on with your ssh connections,
  
== Deleting to end of line ==
+
$ ssh -v user@host
  
d$
+
Or
  
== Deleting to beginning of line ==
+
$ ssh -vv user@host
  
d^
+
== Unlocking SSH key for session ==
  
== Finding text ==
+
jj5@orac:~/.config/autostart$ cat ssh-add.desktop
 +
[Desktop Entry]
 +
Type=Application
 +
Name=ssh-add
 +
Comment=Adds my private key to my session.
 +
Exec=/usr/bin/konsole -e 'ssh-add /home/$USER/.ssh/id_rsa'
  
To search forward for "text":
+
== Links ==
  
/text
+
* [http://blogs.perl.org/users/smylers/2011/08/ssh-productivity-tips.html SSH Can Do That? Productivity Tips for Working with Remote Servers]
 +
* [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html PuTTY Download Page]
  
To search backward for "text":
+
= Standard IO =
  
?text
+
== cat EOF ==
  
To repeat the last search in a forward direction press 'n', or to search again backwards press 'N'.
+
$ cat > output <<EOF
 +
> text
 +
> EOF
  
== Finding and replacing text ==
+
$ cat output
 +
text
  
To replace the first instance of "search" on the current line with "destroy":
+
= Script =
  
:s/search/destroy/
+
== Creating a session log with script ==
  
To replace all instances of "search" on the current line with "destroy":
+
$ script -t 2> timing
  
:s/search/destroy/g
+
The session log is in the file 'typescript' and the timing data is in 'timing'.
  
To replace all instances of "search" on lines 13 to 37 with "destroy":
+
== Replaying a scripted session ==
  
  :13,37 s/search/destroy/g
+
  $ scriptreplay timing
  
To replace all instances of "search" in the entire file with "destroy":
+
Uses the default file 'typescript' and the 'timing' file as specified.
  
:%s/search/destroy/g
+
= Screen =
  
== Changing DOS/Windows line-endings (CRLF) to Unix line-endings ==
+
== Creating a new screen or reconnecting to a detached screen ==
  
To set the line-ending to Unix line endings run the command:
+
$ screen -R
  
:setlocal ff=unix
+
== Detaching a screen ==
  
More information on managing file formats [http://vim.wikia.com/wiki/File_format available here].
+
$ screen -D
  
== Disabling auto-indent etc. to paste from clipboard ==
+
== Reconnecting to screen ==
  
To disable smart indenting when you're going to paste in text:
+
$ screen -D
 +
$ screen -R
  
:set paste
+
I have a script in ~/bin/reconnect like so,
  
To turn it off again:
+
#!/bin/bash
 +
screen -D
 +
screen -R
  
:set nopaste
+
This will detach your last screen, and reconnect it on the current terminal.
  
There's more info in this article: [http://vim.wikia.com/wiki/Toggle_auto-indenting_for_code_paste Toggle auto-indenting for code paste]
+
== Scrolling in screen ==
  
== Positioning windows ==
+
See [https://www.saltycrane.com/blog/2008/01/how-to-scroll-in-gnu-screen/ How to scroll in GNU Screen]. Basically press Ctrl+A ESC then use Page Up and Page Down. Press ESC again to exit copy mode. As usual you can use Ctrl+[ in place of ESC.
  
Use -o for horizontal split, e.g.:
+
= tmux =
  
vim -o a.txt b.txt
+
== Live collaboration with tmux ==
  
Use -O for vertical split, e.g.:
+
User A:
  
  vim -o a.txt b.txt
+
  tmux -S /tmp/collab
 +
chmod 777 /tmp/collab
  
Use ^W to navigate windows then use directional keys h, j, k, l, etc.
+
User B:
  
Use ^W and &lt; or &gt; to resize windows.
+
tmux -S /tmp/collab attach
  
== To indent a block of text in Vim ==
+
= Vim =
  
Use the > command. E.g. to indent five lines:
+
== First, why Vim? ==
  
5 > >
+
Read [http://www.viemu.com/a-why-vi-vim.html Why, oh WHY, do those #?@! nutheads use vi?]
  
Press . (dot) to keep indenting.
+
== Visual modes ==
  
Or inside a block (e.g. curly brace, HTML/XML element, etc.) you can put your cursor in the element on on the curly brace and then:
+
Use 'v' for visual mode, 'V' for visual line mode and Ctrl+V for visual block mode.
  
> %
+
== Configuring spaces instead of tabs ==
  
See [http://stackoverflow.com/questions/235839/indent-multiple-lines-quickly-in-vi#235841 here] for more.
+
I use two spaces instead of tabs. To configure, edit your .vimrc file:
  
== Open a file in a new window/tab ==
+
$ vim ~/.vimrc
  
To open a file on the left hand side:
+
and include the following lines:
  
  :vert new filename.ext
+
  set tabstop=2
 +
set shiftwidth=2
 +
set expandtab
  
Note: ':vnew filename.ext' and ':vsp filename.ext' also work.
+
== Configuring syntax highlighting ==
  
To open a file at the top:
+
See [http://www.cyberciti.biz/faq/turn-on-or-off-color-syntax-highlighting-in-vi-or-vim/ here].
  
:new filename.ext
+
Use:
  
See [http://stackoverflow.com/questions/10760310/how-to-open-a-new-file-in-vim-in-a-new-window#10762678 here] for more.
+
:syntax on
  
== Explore files in Vim ==
+
to turn on syntax highlighting.
  
Enter:
+
Use:
 +
 
 +
:syntax off
  
:Explore
+
to turn off syntax highlighting.
  
== Switch between Vim tabs ==
+
To always use syntax highlighting:
  
Use gt and gT.
+
$ vim ~/.vimrc
  
== Switch between Vim windows ==
+
and add:
  
To toggle between open windows use:
+
syntax on
  
Ctrl+W W
+
To get a list of supported colour schemes open vim and type:
  
To move in a direction use:
+
:colorscheme[space][Ctrl+D]
  
Ctrl+W h/j/k/l
+
To always use a particular colorscheme edit ~/.vimrc and add (for example):
  
See [http://superuser.com/questions/280500/how-does-one-switch-between-windows-on-vim#280501 here] for more.
+
colorscheme desert
  
== Insert block comment in Vim ==
+
== Inserting a TAB character when expandtab is on ==
  
See [https://stackoverflow.com/a/253391/868138 here] for line-commenting.
+
The problem here is that you have configured vim to insert spaces, but for a particular file (e.g. a Makefile) you need to insert a character.
  
So it's:
+
Press Ctrl+V TAB to insert a literal tab character.
  
# Ctrl+V (Note: not Shift+V!)
+
Or you can disable tab expansion altogether with:
# Up/Down to select rows
 
# Shift+I
 
# Enter your text, e.g. '#' or '//'
 
# Ctrl+[ (or 'Esc')
 
  
== Navigate to matching tag ==
+
:set expandtab!
  
To navigate to the matching beginning or end tag use '%'.
+
== Changing 2 space indent to 4 space indent (e.g. for python files) ==
  
You can also use e.g. '[{' to match the previous '{', or e.g. '])' to match the next ')'.
+
:%s/^\s*/&&/g
  
== Auto-format HTML tags ==
+
For more information [https://www.progclub.org/blog/2013/08/10/vim-reformat-a-python-file-to-have-4-space-indentations/ see here].
  
Stolen from [https://www.quora.com/How-do-you-auto-format-HTML-in-Vim here].
+
== Recording and replaying a macro ==
  
# first join all the lines - ggVGgJ
+
To record a macro press 'q' and then a number between 1 and 9. E.g. press "q1". The macro is now recording. When you've finished issuing your commands press 'q' again to finish recording. To replay a macro press '@' followed by the number of the macro. That is, if you pressed "q1" to record the macro, press "@1" to replay the macro. To replay the last macro again press "@@".
# Now break tags to new lines - :%s/>\s*</>\r</g
 
# Now set filetype - :set ft=html (you can do this before too)
 
# Now Indent - ggVG=
 
  
== Links ==
+
== Deleting to end of line ==
  
* [http://www.vim.org/ Vim: the editor]
+
d$
* [http://yannesposito.com/Scratch/en/blog/Learn-Vim-Progressively/ Learn Vim Progressively]
 
* [http://michael.peopleofhonoronly.com/vim/ Vim cheat sheet for programmers]
 
* [http://stackoverflow.com/questions/4781070/how-to-insert-tab-character-when-expandtab-option-is-on-in-vim How to insert Tab character when expandtab option is ON in VIM]
 
* [https://www.linux.com/learn/tutorials/8255-vim-tips-the-basics-of-search-and-replace Vim tips: the basics of search and replace]
 
* [http://vim.wikia.com/wiki/File_format File format]
 
* [http://www.viemu.com/a_vi_vim_graphical_cheat_sheet_tutorial.html Graphical vi-vim Cheat Sheet and Tutorial]
 
* [http://www.angelwatt.com/coding/notes/vim-commands.html Vim Commands Cheat Sheet]
 
  
= Write =
+
== Deleting to beginning of line ==
  
== Talking to other users on the system ==
+
d^
  
'''write''' is a unix command for talking to other users on the system. To use '''write''':
+
== Finding text ==
  
1. SSH to <username>@<hostname> and login with your username and password.
+
To search forward for "text":
  
2. Issue the following command to find out who is logged onto the system:
+
/text
  
$ who
+
To search backward for "text":
  
3. Issue the following command to talk to a specific user:
+
?text
  
$ write <username>
+
To repeat the last search in a forward direction press 'n', or to search again backwards press 'N'.
  
4. Enter the message you'd like to send the user, followed by Ctrl+C to send. Press Ctrl+D to cancel.
+
== Finding and replacing text ==
  
= Date =
+
To replace the first instance of "search" on the current line with "destroy":
  
== Reporting the time on the server ==
+
:s/search/destroy/
  
$ date
+
To replace all instances of "search" on the current line with "destroy":
  
== Reporting UTC time ==
+
:s/search/destroy/g
  
$ date --utc
+
To replace all instances of "search" on lines 13 to 37 with "destroy":
  
== Getting the date in yyyy-MM-dd-hhmmss format ==
+
:13,37 s/search/destroy/g
  
$ date="`date +%F-%H%M%S`"
+
To replace all instances of "search" in the entire file with "destroy":
  
== Getting the year in four digits ==
+
:%s/search/destroy/g
  
$ year="`date +%Y`"
+
== Changing DOS/Windows line-endings (CRLF) to Unix line-endings ==
  
== Getting the month in two digits ==
+
To set the line-ending to Unix line endings run the command:
  
  $ month="`date +%m`"
+
  :setlocal ff=unix
  
== Getting the day of the month in two digits ==
+
More information on managing file formats [http://vim.wikia.com/wiki/File_format available here].
  
$ day="`date +%d`"
+
== Disabling auto-indent etc. to paste from clipboard ==
  
== Getting yesterday's date ==
+
To disable smart indenting when you're going to paste in text:
  
  $ date --date='1 day ago' +%Y-%m-%d
+
  :set paste
  
== Converting Unix time (seconds since epoch) ==
+
To turn it off again:
  
For timestamp '1501370200':
+
:set nopaste
  
$ date -d @1501370200 +%F-%H%M%S
+
There's more info in this article: [http://vim.wikia.com/wiki/Toggle_auto-indenting_for_code_paste Toggle auto-indenting for code paste]
  
== Running timedatectl from systemd ==
+
== Positioning windows ==
  
There's a new command bundled with systmed:
+
Use -o for horizontal split, e.g.:
  
  # timedatectl
+
  vim -o a.txt b.txt
  
It reports on (and controls) how the system time is configured.
+
Use -O for vertical split, e.g.:
  
= MySQL =
+
vim -o a.txt b.txt
  
== Run mysql without authentication/authorisation ==
+
Use ^W to navigate windows then use directional keys h, j, k, l, etc.
  
# service mysql stop
+
Use ^W and &lt; or &gt; to resize windows.
# mysqld_safe --skip-grant-tables &
 
  
Then you can connect without a password, e.g.:
+
== To indent a block of text in Vim ==
  
# mysql -u root mysql
+
Use the > command. E.g. to indent five lines:
  
To stop the unauthenticated service:
+
5 > >
  
# mysqladmin shutdown
+
Press . (dot) to keep indenting.
  
Then restart a normal service:
+
Or inside a block (e.g. curly brace, HTML/XML element, etc.) you can put your cursor in the element on on the curly brace and then:
  
  # service mysql start
+
  > %
  
== Logging all database queries ==
+
See [http://stackoverflow.com/questions/235839/indent-multiple-lines-quickly-in-vi#235841 here] for more.
  
# vim /etc/mysql/my.cnf
+
== Open a file in a new window/tab ==
  
In the [mysqld] section add:
+
To open a file on the left hand side:
  
  log=/tmp/mysql.log
+
  :vert new filename.ext
  
Then:
+
Note: ':vnew filename.ext' and ':vsp filename.ext' also work.
  
# service mysql restart
+
To open a file at the top:
  
Watch the log with:
+
:new filename.ext
  
# tail -f /tmp/mysql.log
+
See [http://stackoverflow.com/questions/10760310/how-to-open-a-new-file-in-vim-in-a-new-window#10762678 here] for more.
  
== Dumping a MySQL database ==
+
== Explore files in Vim ==
  
You can dump the database into a file using:  
+
Enter:
 
$ mysqldump -h hostname -u user --password=password databasename > filename
 
  
== Loading a MySQL database from a dump file ==
+
:Explore
  
You can create a database using:
+
== Switch between Vim tabs ==
  
$ echo create database databasename | mysql -h hostname -u user -p
+
Use gt and gT.
  
You can restore a database using:
+
== Switch between Vim windows ==
 
$ mysql -h hostname -u user --password=password databasename < filename
 
  
== Creating a MySQL user ==
+
To toggle between open windows use:
  
  # mysql -h localhost -u root --password=<password>
+
  Ctrl+W W
mysql> create user 'username'@'localhost' identified by '<password>';
 
  
== Granting all MySQL user permissions ==
+
To move in a direction use:
  
  # mysql -h localhost -u root --password=<password>
+
  Ctrl+W h/j/k/l
mysql> grant all privileges on dbname.* to user@host;
 
  
== Select domain name from email address ==
+
See [http://superuser.com/questions/280500/how-does-one-switch-between-windows-on-vim#280501 here] for more.
  
SELECT SUBSTR( email, INSTR( email, '@' ) + 1 )
+
== Insert block comment in Vim ==
  
== Check if MySQL connection is encrypted with TLS/SSL ==
+
See [https://stackoverflow.com/a/253391/868138 here] for line-commenting.
  
Check the SSL version in use:
+
So it's:
  
show status like 'Ssl_version';
+
# Ctrl+V (Note: not Shift+V!)
 +
# Up/Down to select rows
 +
# Shift+I
 +
# Enter your text, e.g. '#' or '//'
 +
# Ctrl+[ (or 'Esc')
  
Or check the cipher in use:
+
== Navigate to matching tag ==
  
show status like 'Ssl_cipher';
+
To navigate to the matching beginning or end tag use '%'.
  
= Apache =
+
You can also use e.g. '[{' to match the previous '{', or e.g. '])' to match the next ')'.
  
== Maintaining .htaccess passwords ==
+
== Auto-format HTML tags ==
  
To add or modify the password for a user:
+
Stolen from [https://www.quora.com/How-do-you-auto-format-HTML-in-Vim here].
  
$ htpasswd /etc/apache2/passwd username
+
# first join all the lines - ggVGgJ
 
+
# Now break tags to new lines - :%s/>\s*</>\r</g
== Configuring PHP session timeout in .htaccess ==
+
# Now set filetype - :set ft=html (you can do this before too)
 +
# Now Indent - ggVG=
  
For a session timeout of 9 hours:
+
== Links ==
  
php_value session.cookie_lifetime 32400
+
* [http://www.vim.org/ Vim: the editor]
php_value session.gc_maxlifetime 32400
+
* [http://yannesposito.com/Scratch/en/blog/Learn-Vim-Progressively/ Learn Vim Progressively]
 +
* [http://michael.peopleofhonoronly.com/vim/ Vim cheat sheet for programmers]
 +
* [http://stackoverflow.com/questions/4781070/how-to-insert-tab-character-when-expandtab-option-is-on-in-vim How to insert Tab character when expandtab option is ON in VIM]
 +
* [https://www.linux.com/learn/tutorials/8255-vim-tips-the-basics-of-search-and-replace Vim tips: the basics of search and replace]
 +
* [http://vim.wikia.com/wiki/File_format File format]
 +
* [http://www.viemu.com/a_vi_vim_graphical_cheat_sheet_tutorial.html Graphical vi-vim Cheat Sheet and Tutorial]
 +
* [http://www.angelwatt.com/coding/notes/vim-commands.html Vim Commands Cheat Sheet]
  
== Disabling PHP magic quotes in .htaccess ==
+
== Create PDF from text using Vim ==
  
php_flag magic_quotes_gpc Off
+
Generate PDF from input.txt with:
  
== Requiring HTTP Auth in .htaccess ==
+
$ vim input.txt -c "hardcopy > doc.ps | q" && ps2pdf doc.ps
  
AuthType Basic
+
Examine output with:
AuthName "Speak Friend And Enter"
 
AuthUserFile /home/jj5/.htpasswd
 
Require valid-user
 
  
== Restarting Apache ==
+
$ okular doc.pdf
  
The hard way
+
= Write =
  
$ sudo /etc/init.d/apache2 restart
+
== Talking to other users on the system ==
  
The graceful way (avoids dropping active connections)
+
'''write''' is a unix command for talking to other users on the system. To use '''write''':
  
$ sudo apache2ctl graceful
+
1. SSH to <username>@<hostname> and login with your username and password.
  
== Allowing directory browsing ==
+
2. Issue the following command to find out who is logged onto the system:
  
To show directory index pages, in the apache config file:
+
$ who
  
<Directory /var/www/data>
+
3. Issue the following command to talk to a specific user:
  Options Indexes
 
</Directory>
 
  
= C =
+
$ write <username>
  
== Locating memset function ==
+
4. Enter the message you'd like to send the user, followed by Ctrl+C to send. Press Ctrl+D to cancel.
  
The memset function is in &lt;string.h> as described in this article [http://www.java-samples.com/showtutorial.php?tutorialid=591 Using memset(), memcpy(), and memmove() in C]
+
= Date =
  
== Links ==
+
== Reporting the time on the server ==
  
* [http://www.ibm.com/developerworks/linux/library/l-memory/ Inside memory management]
+
$ date
  
= PHP =
+
== Reporting UTC time ==
  
== Including a file relative to the including file ==
+
$ date --utc
  
require_once( dirname( __FILE__ ) . '/relative/path/to.php' );
+
== Getting the date in yyyy-MM-dd-hhmmss format ==
  
== Enabling error reporting ==
+
$ date="`date +%F-%H%M%S`"
  
error_reporting( E_ALL | E_STRICT );
+
== Getting the year in four digits ==
ini_set( 'display_errors', 'On' );
 
  
== Setting an error handler ==
+
$ year="`date +%Y`"
  
set_error_handler( "error_handler", E_ALL | E_STRICT );
+
== Getting the month in two digits ==
  
  function error_handler( $error_code, $error_message, $error_file, $error_line, $error_context ) {
+
  $ month="`date +%m`"
  // ...
 
}
 
  
== Disable HTML content in var_dump ==
+
== Getting the day of the month in two digits ==
  
  ini_set( 'html_errors', 'off' );
+
  $ day="`date +%d`"
  
= BASH scripting =
+
== Getting yesterday's date ==
  
For a primer on bash scripting see [http://www.progsoc.org/tfm/tfm03/node37.html TFM: Erotic Fantasy: /bin/sh Programming].
+
$ date --date='1 day ago' +%Y-%m-%d
  
== Telling a script to run in bash ==
+
== Converting Unix time (seconds since epoch) ==
  
The first line of the file should be:
+
For timestamp '1501370200':
  
  #!/bin/bash
+
  $ date -d @1501370200 +%F-%H%M%S
  
== Checking if a command-line argument was passed in ==
+
== Running timedatectl from systemd ==
  
if [ -n "$1" ]; then
+
There's a new command bundled with systmed:
  echo "Missing parameter 1.";
 
  exit 1;
 
fi
 
  
== Checking if a command-line argument was not passed in ==
+
# timedatectl
  
if [ "$1" = "" ]; then
+
It reports on (and controls) how the system time is configured.
  echo "Missing parameter 1.";
 
  exit 1;
 
fi
 
  
Or:
+
= MySQL =
  
if [ -z "$1" ]; then
+
== Run mysql without authentication/authorisation ==
  echo "Missing parameter 1.";
 
  exit 1;
 
fi
 
  
== Checking command exit status ==
+
# service mysql stop
 +
# mysqld_safe --skip-grant-tables &
  
cd /my/path
+
Then you can connect without a password, e.g.:
if [ "$?" -ne "0" ]; then
 
  echo "Cannot change dir.";
 
  exit 1;
 
fi
 
  
== Checking if a file does/doesn't exist ==
+
# mysql -u root mysql
  
Check if file exists:
+
To stop the unauthenticated service:
  
  if [ -f "/my/file" ]; then
+
  # mysqladmin shutdown
  cat /my/file
 
fi
 
  
Check if file doesn't exist:
+
Then restart a normal service:
  
  if [ ! -f "/my/file" ]; then
+
  # service mysql start
  touch /my/file
 
fi
 
  
== Checking if a directory does/doesn't exist ==
+
== Logging all database queries ==
  
Check if directory exists:
+
# vim /etc/mysql/my.cnf
  
if [ -d "/my/dir" ]; then
+
In the [mysqld] section add:
  rmdir /my/dir
 
fi
 
  
Check if directory doesn't exist:
+
log=/tmp/mysql.log
  
if [ ! -d "/my/dir" ]; then
+
Then:
  mkdir /my/dir
 
fi
 
  
== Deleting old backups ==
+
# service mysql restart
  
To keep only the latest five backups:
+
Watch the log with:
  
  find . -maxdepth 1 -type f -printf '%T@ %p\0' | sort -r -z -n | awk 'BEGIN { RS="\0"; ORS="\0"; FS="" } NR > 5 { sub("^[0-9]*(.[0-9]*)? ", ""); print }' | xargs -0 rm -f
+
  # tail -f /tmp/mysql.log
  
This script stolen from [http://stackoverflow.com/questions/25785/delete-all-but-the-most-recent-x-files-in-bash stackoverflow].
+
== Dumping a MySQL database ==
  
Requires GNU find for -printf, GNU sort for -z, GNU awk for "\0" and GNU xargs for -0, but handles files with embedded newlines or spaces.
+
You can dump the database into a file using:
 +
 +
$ mysqldump -h hostname -u user --password=password databasename > filename
  
== Changing into the script's directory ==
+
== Loading a MySQL database from a dump file ==
  
cd "`dirname $0`"
+
You can create a database using:
  
== Getting the absolute path of a relative path ==
+
$ echo create database databasename | mysql -h hostname -u user -p
  
  readlink -f ./some/path
+
You can restore a database using:
 +
   
 +
$ mysql -h hostname -u user --password=password databasename < filename
  
== Creating a temp directory ==
+
== Creating a MySQL user ==
  
  dir=`mktemp -d` && cd $dir
+
  # mysql -h localhost -u root --password=<password>
 +
mysql> create user 'username'@'localhost' identified by '<password>';
  
== Reading secret input from stdin ==
+
== Granting all MySQL user permissions ==
  
You can read a secret, such as a password, like this:
+
# mysql -h localhost -u root --password=<password>
 +
mysql> grant all privileges on dbname.* to user@host;
  
echo -n "Enter passphrase: "
+
== Select domain name from email address ==
stty -echo
 
read passphrase;
 
stty echo
 
echo ""
 
  
After running the above the secret will be in the $passphrase environment variable.
+
SELECT SUBSTR( email, INSTR( email, '@' ) + 1 )
  
== String replacements in bash ==
+
== Check if MySQL connection is encrypted with TLS/SSL ==
 +
 
 +
Check the SSL version in use:
  
See the [http://www.tldp.org/LDP/abs/html/string-manipulation.html string manipulation] doco. Basically, to replace first occurrence:
+
show status like 'Ssl_version';
  
result=${var/find/replace}
+
Or check the cipher in use:
  
To replace all occurrences:
+
show status like 'Ssl_cipher';
  
result=${var//find/replace}
+
= Apache =
  
A practical example, get an ISO date and turn it into a path:
+
== Reporting loaded Apache modules ==
  
  date="$(date +%Y-%m-%d)"
+
  # apache2ctl -M
work_dir=${date//-//}
 
  
== Sending a HEREDOC to a file ==
+
== Maintaining .htaccess passwords ==
  
cat << EOF > /tmp/yourfilehere
+
To add or modify the password for a user:
These contents will be written to the file.
 
        This line is indented.
 
EOF
 
  
== Bash case/switch statement ==
+
$ htpasswd /etc/apache2/passwd username
  
See [http://tldp.org/LDP/Bash-Beginners-Guide/html/sect_07_03.html using case statements], e.g.:
+
== Configuring PHP session timeout in .htaccess ==
  
case $space in
+
For a session timeout of 9 hours:
[1-6]*)
 
  Message="All is quiet."
 
  ;;
 
[7-8]*)
 
  Message="Start thinking about cleaning out some stuff.  There's a partition that is $space % full."
 
  ;;
 
9[1-8])
 
  Message="Better hurry with that new disk...  One partition is $space % full."
 
  ;;
 
99)
 
  Message="I'm drowning here!  There's a partition at $space %!"
 
  ;;
 
*)
 
  Message="I seem to be running with an nonexistent amount of disk space..."
 
  ;;
 
esac
 
  
== Using dotglob shopt to match dot-files ==
+
php_value session.cookie_lifetime 32400
 +
php_value session.gc_maxlifetime 32400
  
To enable dot-file matching in globs, set the dotglob shell option:
+
== Disabling PHP magic quotes in .htaccess ==
  
  $ shopt -s dotglob
+
  php_flag magic_quotes_gpc Off
  
== Stopping a script from running if it previously exited due to error ==
+
== Requiring HTTP Auth in .htaccess ==
  
  persistentDataDir=/var/lib/something
+
  AuthType Basic
  alarm() {
+
  AuthName "Speak Friend And Enter"
  touch $persistentDataDir/alarm
+
AuthUserFile /home/jj5/.htpasswd
  }
+
  Require valid-user
trap alarm ERR
 
[ -f $persistentDataDir/alarm ] && exit 1
 
  
== Make sure only one instance of a script is running at a time ==
+
== Restarting Apache ==
  
ephemeralDataDir=/var/run/something
+
The hard way
unlock() {
 
  rmdir $ephemeralDataDir/lock
 
}
 
mkdir $ephemeralDataDir/lock || exit 1;
 
trap unlock EXIT
 
  
= Sed =
+
$ sudo /etc/init.d/apache2 restart
  
== Find and replace with sed ==
+
The graceful way (avoids dropping active connections)
  
To update the current file use '-i'. E.g.:
+
$ sudo apache2ctl graceful
  
sed -i 's/search-text/replace-text/' file
+
== Allowing directory browsing ==
  
= Awk =
+
To show directory index pages, in the apache config file:
  
== Listing IP addresses in an Apache web log ==
+
<Directory /var/www/data>
 +
  Options Indexes
 +
</Directory>
  
awk '/GET \/path\/for\/url/ { print $1 }' /var/log/apache2/access.log | sort | uniq
+
= C =
  
== Printing space-separated field ==
+
== Locating memset function ==
  
echo 'no no yes no' | awk '{print $3}'
+
The memset function is in &lt;string.h> as described in this article [http://www.java-samples.com/showtutorial.php?tutorialid=591 Using memset(), memcpy(), and memmove() in C]
  
== Printing delimited field ==
+
== Links ==
  
echo 'no:no:yes:no' | awk -F ':' '{print $3}'
+
* [http://www.ibm.com/developerworks/linux/library/l-memory/ Inside memory management]
  
= Subversion =
+
= PHP =
  
== Setting svn:externals from the command-line ==
+
== Including a file relative to the including file ==
  
See [http://beerpla.net/2009/06/20/how-to-properly-set-svn-svnexternals-property-in-svn-command-line/ here].
+
require_once( dirname( __FILE__ ) . '/relative/path/to.php' );
  
To set an svn:externals from the command-line:
+
== Enabling error reporting ==
  
  svn propset svn:externals 'rdfind-php https://www.progclub.org/svn/pcrepo/rdfind.php/branches/0.1' .
+
  error_reporting( E_ALL | E_STRICT );
svn ci -m 'Adding svn:externals for rdfind-php...'
+
ini_set( 'display_errors', 'On' );
svn up
 
  
Or to use a file:
+
== Setting an error handler ==
  
  svn propset svn:externals -F svn.externals .
+
  set_error_handler( "error_handler", E_ALL | E_STRICT );
  
== Setting svn:ignore from the command line ==
+
function error_handler( $error_code, $error_message, $error_file, $error_line, $error_context ) {
 +
  // ...
 +
}
  
See [http://tedone.typepad.com/blog/2010/03/setting-svnignore-from-the-command-line.html here].
+
== Disable HTML content in var_dump ==
  
  $ svn propset svn:ignore [file|folder] [path]
+
  ini_set( 'html_errors', 'off' );
  
Or use a file and apply recursively:
+
== Report PHP modules ==
  
  $ svn propset svn:ignore -RF ./svn-ignore-list.txt .
+
  $ php -m
  
= Git =
+
== PHP Security Best Practices For Sys Admins ==
  
== Showing status of working copy ==
+
See [https://www.cyberciti.biz/tips/php-security-best-practices-tutorial.html Linux 25 PHP Security Best Practices For Sys Admins].
  
git status
+
= BASH scripting =
  
== Showing repo history ==
+
For a primer on bash scripting see [http://www.progsoc.org/tfm/tfm03/node37.html TFM: Erotic Fantasy: /bin/sh Programming].
  
git log
+
== Telling a script to run in bash ==
  
== Showing remote repositories (including 'origin') ==
+
The first line of the file should be:
  
  git remote -v
+
  #!/bin/bash
  
== Handy git aliases ==
+
== Checking if a command-line argument was passed in ==
  
Save these to your ~/.gitconfig file.
+
if [ -n "$1" ]; then
 +
  echo "Missing parameter 1.";
 +
  exit 1;
 +
fi
  
For a nicer view of history than standard 'git log' -- colourful, one-line-per commit, etc:
+
== Checking if a command-line argument was not passed in ==
  
  graph = !git log --all --graph --color --abbrev-commit --pretty=oneline
+
if [ "$1" = "" ]; then
 +
  echo "Missing parameter 1.";
 +
  exit 1;
 +
fi
  
To show only the files that have changed, rather than the full line-by-line content:
+
Or:
  
  dif  = !git diff --name-status
+
if [ -z "$1" ]; then
 +
  echo "Missing parameter 1.";
 +
  exit 1;
 +
fi
  
= IRC =
+
== Checking command exit status ==
  
== Instructing ChanServ to op an admin ==
+
cd /my/path
 +
if [ "$?" -ne "0" ]; then
 +
  echo "Cannot change dir.";
 +
  exit 1;
 +
fi
  
/msg ChanServ op #channel user
+
== Checking if a file does/doesn't exist ==
  
E.g.
+
Check if file exists:
  
  /msg ChanServ op #gnurc jj5
+
  if [ -f "/my/file" ]; then
 +
  cat /my/file
 +
fi
  
Sub 'op' for 'deop' to remove op privilege.
+
Check if file doesn't exist:
  
= C++ =
+
if [ ! -f "/my/file" ]; then
 +
  touch /my/file
 +
fi
  
== C++ books ==
+
== Checking if a directory does/doesn't exist ==
  
=== Books I want ===
+
Check if directory exists:
 +
 
 +
if [ -d "/my/dir" ]; then
 +
  rmdir /my/dir
 +
fi
 +
 
 +
Check if directory doesn't exist:
  
* [http://smile.amazon.com/dp/1785283073 Boost.Asio C++ Network Programming 2ed]
+
if [ ! -d "/my/dir" ]; then
* [http://smile.amazon.com/dp/1783986549 Boost.Asio C++ Network Programming Cookbook]
+
  mkdir /my/dir
 +
fi
  
* [http://www.amazon.com/dp/020170353X Accelerated C++] by Andrew Koening
+
== Deleting old backups ==
* [http://www.amazon.com/dp/0321334876 Effective C++] by Scott Meyers
 
* [http://www.amazon.com/dp/1491903996 Effective Modern C++] by Scott Meyers
 
* [http://www.amazon.com/dp/020163371X More Effective C++] by Scott Meyers
 
* [http://www.amazon.com/dp/0201749629 Effective STL] by Scott Meyers
 
* [http://www.amazon.com/dp/0201615622 Exceptional C++] by Herb Sutter
 
* [http://www.amazon.com/dp/020170434X More Exceptional C++] by Herb Sutter
 
* [http://www.amazon.com/dp/0201760428 Exceptional C++ Style] by Herb Sutter
 
* [http://www.amazon.com/dp/0321227255 C++ Template Metaprogramming] by David Abrahams
 
* [http://www.amazon.com/dp/059652269X 97 Things Every Software Architect Should Know] by Richard Monson-Haefel
 
* [http://www.amazon.com/dp/9491028022 Introduction to the Boost C++ Libraries; Volume II - Advanced Libraries] by Robert Demming
 
  
=== Books I own ===
+
To keep only the latest five backups:
  
* [http://www.amazon.com/dp/0321563840 The C++ Programming Language 4ed] by Bjarne Stroustrup
+
find . -maxdepth 1 -type f -printf '%T@ %p\0' | sort -r -z -n | awk 'BEGIN { RS="\0"; ORS="\0"; FS="" } NR > 5 { sub("^[0-9]*(.[0-9]*)? ", ""); print }' | xargs -0 rm -f
* [http://smile.amazon.com/dp/9491028022 Introduction to the Boost C++ Libraries; Volume II - Advanced Libraries]
 
* [http://smile.amazon.com/dp/1849514887 Boost C++ Application Development Cookbook]
 
* [http://smile.amazon.com/dp/1782163263 Boost.Asio C++ Network Programming]
 
* [http://www.amazon.com/dp/0321113586 C++ Coding Standards] by Herb Sutter &#x2713;
 
* [http://www.amazon.com/dp/0201704315 Modern C++ Design] by Andrei Alexandrescu &#x2713;
 
* [http://www.amazon.com/dp/0596809484 97 Things Every Programmer Should Know] by Kevlin Henney &#x2713;
 
* [http://www.amazon.com/dp/0321133544 Beyond the C++ Standard Library] by Björn Karlsson &#x2713;
 
* [http://www.amazon.com/dp/9491028014 Introduction to the Boost C++ Libraries; Volume I - Foundations] by Robert Demming &#x2713;
 
* [http://www.amazon.com/dp/0123850037 API Design for C++] by Martin Reddy &#x2713;
 
* [http://www.amazon.com/dp/B00CB23URA Advanced C++ Metaprogramming] by Davide Di Gennaro &#x2713;
 
** Note: the next version of this book is: [http://www.amazon.com/dp/1484210115 Advanced Metaprogramming in Classic C++]
 
* [http://www.amazon.com/dp/1933988770 C++ Concurrency in Action: Practical Multithreading] by Anthony Williams &#x2713;
 
  
=== Books I'm not reading ===
+
This script stolen from [http://stackoverflow.com/questions/25785/delete-all-but-the-most-recent-x-files-in-bash stackoverflow].
  
* [http://www.amazon.com/dp/0321563840 The C++ Programming Language 3ed] by Bjarne Stroustrup &#x2713;
+
Requires GNU find for -printf, GNU sort for -z, GNU awk for "\0" and GNU xargs for -0, but handles files with embedded newlines or spaces.
** Note: 3ed is obsolete. Buy 4ed (above).
 
  
=== Books I've read ===
+
== Changing into the script's directory ==
  
* [http://www.amazon.com/dp/0596004966 C++ Pocket Reference] by Kyle Loudon &#x2713;
+
cd "`dirname $0`"
  
== C++ blogs/articles ==
+
== Getting the absolute path of a relative path ==
  
* [http://blogs.msdn.com/b/hsutter/ Herb Sutter's MSDN blog]
+
readlink -f ./some/path
* [http://herbsutter.com/ Herb Sutter's personal blog]
 
* [http://herbsutter.com/gotw/ Herb Sutter's Guru of the Week (GotW)] updated from [http://gotw.ca/gotw/ gotw.ca]
 
  
== C++ performance tips ==
+
== Creating a temp directory ==
  
* ++c can be faster than c++.
+
dir=`mktemp -d` && cd $dir
* use const for everything that you possibly can.
 
* use 'inline' when you need to define a function in a header. Typically only do that if it's small and the increase in code size from inlining is worth the cost to avoid the cost of a function call. For anything except trivially small functions you'll probably need to profile to know if it's worth it.
 
* don't use registers.
 
* const [http://www.gotw.ca/gotw/081.htm rarely affects performance].
 
* debunking a number of [http://www.open-std.org/jtc1/sc22/wg21/docs/TR18015.pdf C++ myths that won't die].
 
* std::sort<> is typically faster than qsort() because it can avoid indirection at runtime.
 
* if you've got parallelisation going on, you may be able to just replace a std::for_each with a parallel equivalent.
 
* read about [http://stackoverflow.com/questions/579887/how-expensive-is-rtti performance cost of RTTI] (Run Time Type Information) and [http://stackoverflow.com/questions/4486609/when-can-compiling-c-without-rtti-cause-problems how to disable it]
 
* don't use dynamic_cast because it is slow (typeid is faster but still relies on RTTI)
 
* prefer unique_ptr to shared_ptr when possible. unique_ptr has less overhead.
 
* [http://sunsite.uakom.sk/sunworldonline/swol-02-1996/swol-02-perf.html Which is better, static or dynamic linking?]
 
* [http://stackoverflow.com/questions/2550281/floating-point-vs-integer-calculations-on-modern-hardware Integer vs Floating-Point performance]
 
  
= systemd =
+
== Reading secret input from stdin ==
  
[https://en.wikipedia.org/wiki/Systemd systemd] is an init system used in most Linux distributions to bootstrap the user space and manage all processes subsequently.
+
You can read a secret, such as a password, like this:
  
== Following a service log ==
+
echo -n "Enter passphrase: "
 +
stty -echo
 +
read passphrase;
 +
stty echo
 +
echo ""
  
e.g. for bind9:
+
After running the above the secret will be in the $passphrase environment variable.
  
# journalctl -f -u bind9
+
== String replacements in bash ==
  
or for everything:
+
See the [http://www.tldp.org/LDP/abs/html/string-manipulation.html string manipulation] doco. Basically, to replace first occurrence:
  
  # journalctl -f
+
  result=${var/find/replace}
  
== System status ==
+
To replace all occurrences:
  
To see spawned services hierarchy:
+
result=${var//find/replace}
  
# systemctl status
+
A practical example, get an ISO date and turn it into a path:
  
Or for a specific service e.g.:
+
date="$(date +%Y-%m-%d)"
 +
work_dir=${date//-//}
  
# systemctl status networking
+
== Sending a HEREDOC to a file ==
  
= SaltStack =
+
cat << EOF > /tmp/yourfilehere
 +
These contents will be written to the file.
 +
        This line is indented.
 +
EOF
  
== Running a command on specified minions ==
+
== Bash case/switch statement ==
  
salt 'host' cmd.run 'update-locale'
+
See [http://tldp.org/LDP/Bash-Beginners-Guide/html/sect_07_03.html using case statements], e.g.:
  
== Running a command on all minions ==
+
case $space in
 
+
[1-6]*)
  salt '*' cmd.run 'update-locale'
+
  Message="All is quiet."
 
+
  ;;
== Listing active jobs ==
+
[7-8]*)
 +
  Message="Start thinking about cleaning out some stuff.  There's a partition that is $space % full."
 +
  ;;
 +
9[1-8])
 +
  Message="Better hurry with that new disk...  One partition is $space % full."
 +
  ;;
 +
99)
 +
  Message="I'm drowning here!  There's a partition at $space %!"
 +
  ;;
 +
  *)
 +
  Message="I seem to be running with an nonexistent amount of disk space..."
 +
  ;;
 +
esac
  
salt-run jobs.active
+
== Using dotglob shopt to match dot-files ==
  
== Listing available grains ==
+
To enable dot-file matching in globs, set the dotglob shell option:
  
  salt 'example' grains.items
+
  $ shopt -s dotglob
  
== Listing available pillar ==
+
== Stopping a script from running if it previously exited due to error ==
  
  salt 'example' pillar.items
+
  persistentDataDir=/var/lib/something
 +
alarm() {
 +
  touch $persistentDataDir/alarm
 +
}
 +
trap alarm ERR
 +
[ -f $persistentDataDir/alarm ] && exit 1
  
== Reporting a grain value ==
+
== Make sure only one instance of a script is running at a time ==
  
e.g. for the 'mem_total' grain:
+
ephemeralDataDir=/var/run/something
 +
unlock() {
 +
  rmdir $ephemeralDataDir/lock
 +
}
 +
mkdir $ephemeralDataDir/lock || exit 1;
 +
trap unlock EXIT
 +
 
 +
== BASH programming advice ==
 +
 
 +
See [https://blog.yossarian.net/2020/01/23/Anybody-can-write-good-bash-with-a-little-effort Anybody can write good bash (with a little effort)].
 +
 
 +
== Run a command using arguments that come from an array ==
 +
 
 +
See [https://unix.stackexchange.com/a/412647/356289 here]:
 +
 
 +
#!/bin/bash
 +
tabs=("first tab" "second tab")
 +
args=()
 +
for t in "${tabs[@]}" ; do
 +
  args+=(-t "$t")
 +
done
 +
app "${args[@]}"
 +
 
 +
== Display a CSV in columnar or tabular format ==
 +
 
 +
$ column -t -s , data.csv
 +
 
 +
= Sed =
 +
 
 +
== Find and replace with sed ==
 +
 
 +
To update the current file use '-i'. E.g.:
  
  salt '*' grains.item mem_total
+
  sed -i 's/search-text/replace-text/' file
  
= KDE =
+
= Awk =
  
== Running user login script (X11/XOrg/XWindows) ==
+
== Listing IP addresses in an Apache web log ==
  
A way to run user login scripts which works for KDE Plasma (and apparently other [https://en.wikipedia.org/wiki/X.Org_Server X.Org Server X Window System] environments) is to create a *.desktop file in ~/.config/autostart/. For example I have a ~/.config/autostart/ssh-add.desktop file with the following contents to register my SSH key in the SSH Agent:
+
awk '/GET \/path\/for\/url/ { print $1 }' /var/log/apache2/access.log | sort | uniq
  
  [Desktop Entry]
+
== Printing space-separated field ==
  Type=Application
+
 
  Name=ssh-add
+
echo 'no no yes no' | awk '{print $3}'
  Comment=Adds my private key to my session.
+
 
 +
== Printing delimited field ==
 +
 
 +
echo 'no:no:yes:no' | awk -F ':' '{print $3}'
 +
 
 +
= Subversion =
 +
 
 +
== Setting svn:externals from the command-line ==
 +
 
 +
See [http://beerpla.net/2009/06/20/how-to-properly-set-svn-svnexternals-property-in-svn-command-line/ here].
 +
 
 +
To set an svn:externals from the command-line:
 +
 
 +
svn propset svn:externals 'rdfind-php https://www.progclub.org/svn/pcrepo/rdfind.php/branches/0.1' .
 +
svn ci -m 'Adding svn:externals for rdfind-php...'
 +
svn up
 +
 
 +
Or to use a file:
 +
 
 +
svn propset svn:externals -F svn.externals .
 +
 
 +
== Setting svn:ignore from the command line ==
 +
 
 +
See [http://tedone.typepad.com/blog/2010/03/setting-svnignore-from-the-command-line.html here].
 +
 
 +
$ svn propset svn:ignore [file|folder] [path]
 +
 
 +
Or use a file and apply recursively:
 +
 
 +
$ svn propset svn:ignore -RF ./svn-ignore-list.txt .
 +
 
 +
= Git =
 +
 
 +
== Showing status of working copy ==
 +
 
 +
git status
 +
 
 +
== Showing repo history ==
 +
 
 +
git log
 +
 
 +
== Showing remote repositories (including 'origin') ==
 +
 
 +
git remote -v
 +
 
 +
== Handy git aliases ==
 +
 
 +
Save these to your ~/.gitconfig file.
 +
 
 +
For a nicer view of history than standard 'git log' -- colourful, one-line-per commit, etc:
 +
 
 +
  graph = !git log --all --graph --color --abbrev-commit --pretty=oneline
 +
 
 +
To show only the files that have changed, rather than the full line-by-line content:
 +
 
 +
  dif  = !git diff --name-status
 +
 
 +
== Show git remote URL ==
 +
 
 +
git config --get remote.origin.url
 +
 
 +
= IRC =
 +
 
 +
== Instructing ChanServ to op an admin ==
 +
 
 +
/msg ChanServ op #channel user
 +
 
 +
E.g.
 +
 
 +
/msg ChanServ op #gnurc jj5
 +
 
 +
Sub 'op' for 'deop' to remove op privilege.
 +
 
 +
= C++ =
 +
 
 +
== C++ books ==
 +
 
 +
=== Books I want ===
 +
 
 +
* [http://smile.amazon.com/dp/1785283073 Boost.Asio C++ Network Programming 2ed]
 +
* [http://smile.amazon.com/dp/1783986549 Boost.Asio C++ Network Programming Cookbook]
 +
 
 +
* [http://www.amazon.com/dp/020170353X Accelerated C++] by Andrew Koening
 +
* [http://www.amazon.com/dp/0321334876 Effective C++] by Scott Meyers
 +
* [http://www.amazon.com/dp/1491903996 Effective Modern C++] by Scott Meyers
 +
* [http://www.amazon.com/dp/020163371X More Effective C++] by Scott Meyers
 +
* [http://www.amazon.com/dp/0201749629 Effective STL] by Scott Meyers
 +
* [http://www.amazon.com/dp/0201615622 Exceptional C++] by Herb Sutter
 +
* [http://www.amazon.com/dp/020170434X More Exceptional C++] by Herb Sutter
 +
* [http://www.amazon.com/dp/0201760428 Exceptional C++ Style] by Herb Sutter
 +
* [http://www.amazon.com/dp/0321227255 C++ Template Metaprogramming] by David Abrahams
 +
* [http://www.amazon.com/dp/059652269X 97 Things Every Software Architect Should Know] by Richard Monson-Haefel
 +
* [http://www.amazon.com/dp/9491028022 Introduction to the Boost C++ Libraries; Volume II - Advanced Libraries] by Robert Demming
 +
 
 +
=== Books I own ===
 +
 
 +
* [http://www.amazon.com/dp/0321563840 The C++ Programming Language 4ed] by Bjarne Stroustrup
 +
* [http://smile.amazon.com/dp/9491028022 Introduction to the Boost C++ Libraries; Volume II - Advanced Libraries]
 +
* [http://smile.amazon.com/dp/1849514887 Boost C++ Application Development Cookbook]
 +
* [http://smile.amazon.com/dp/1782163263 Boost.Asio C++ Network Programming]
 +
* [http://www.amazon.com/dp/0321113586 C++ Coding Standards] by Herb Sutter &#x2713;
 +
* [http://www.amazon.com/dp/0201704315 Modern C++ Design] by Andrei Alexandrescu &#x2713;
 +
* [http://www.amazon.com/dp/0596809484 97 Things Every Programmer Should Know] by Kevlin Henney &#x2713;
 +
* [http://www.amazon.com/dp/0321133544 Beyond the C++ Standard Library] by Björn Karlsson &#x2713;
 +
* [http://www.amazon.com/dp/9491028014 Introduction to the Boost C++ Libraries; Volume I - Foundations] by Robert Demming &#x2713;
 +
* [http://www.amazon.com/dp/0123850037 API Design for C++] by Martin Reddy &#x2713;
 +
* [http://www.amazon.com/dp/B00CB23URA Advanced C++ Metaprogramming] by Davide Di Gennaro &#x2713;
 +
** Note: the next version of this book is: [http://www.amazon.com/dp/1484210115 Advanced Metaprogramming in Classic C++]
 +
* [http://www.amazon.com/dp/1933988770 C++ Concurrency in Action: Practical Multithreading] by Anthony Williams &#x2713;
 +
 
 +
=== Books I'm not reading ===
 +
 
 +
* [http://www.amazon.com/dp/0321563840 The C++ Programming Language 3ed] by Bjarne Stroustrup &#x2713;
 +
** Note: 3ed is obsolete. Buy 4ed (above).
 +
 
 +
=== Books I've read ===
 +
 
 +
* [http://www.amazon.com/dp/0596004966 C++ Pocket Reference] by Kyle Loudon &#x2713;
 +
 
 +
== C++ blogs/articles ==
 +
 
 +
* [http://blogs.msdn.com/b/hsutter/ Herb Sutter's MSDN blog]
 +
* [http://herbsutter.com/ Herb Sutter's personal blog]
 +
* [http://herbsutter.com/gotw/ Herb Sutter's Guru of the Week (GotW)] updated from [http://gotw.ca/gotw/ gotw.ca]
 +
 
 +
== C++ performance tips ==
 +
 
 +
* ++c can be faster than c++.
 +
* use const for everything that you possibly can.
 +
* use 'inline' when you need to define a function in a header. Typically only do that if it's small and the increase in code size from inlining is worth the cost to avoid the cost of a function call. For anything except trivially small functions you'll probably need to profile to know if it's worth it.
 +
* don't use registers.
 +
* const [http://www.gotw.ca/gotw/081.htm rarely affects performance].
 +
* debunking a number of [http://www.open-std.org/jtc1/sc22/wg21/docs/TR18015.pdf C++ myths that won't die].
 +
* std::sort<> is typically faster than qsort() because it can avoid indirection at runtime.
 +
* if you've got parallelisation going on, you may be able to just replace a std::for_each with a parallel equivalent.
 +
* read about [http://stackoverflow.com/questions/579887/how-expensive-is-rtti performance cost of RTTI] (Run Time Type Information) and [http://stackoverflow.com/questions/4486609/when-can-compiling-c-without-rtti-cause-problems how to disable it]
 +
* don't use dynamic_cast because it is slow (typeid is faster but still relies on RTTI)
 +
* prefer unique_ptr to shared_ptr when possible. unique_ptr has less overhead.
 +
* [http://sunsite.uakom.sk/sunworldonline/swol-02-1996/swol-02-perf.html Which is better, static or dynamic linking?]
 +
* [http://stackoverflow.com/questions/2550281/floating-point-vs-integer-calculations-on-modern-hardware Integer vs Floating-Point performance]
 +
 
 +
= systemd =
 +
 
 +
[https://en.wikipedia.org/wiki/Systemd systemd] is an init system used in most Linux distributions to bootstrap the user space and manage all processes subsequently.
 +
 
 +
== Following a service log ==
 +
 
 +
e.g. for bind9:
 +
 
 +
# journalctl -f -u bind9
 +
 
 +
or for everything:
 +
 
 +
# journalctl -f
 +
 
 +
== System status ==
 +
 
 +
To see spawned services hierarchy:
 +
 
 +
# systemctl status
 +
 
 +
Or for a specific service e.g.:
 +
 
 +
# systemctl status networking
 +
 
 +
= SaltStack =
 +
 
 +
== Running a command on specified minions ==
 +
 
 +
From the salt master:
 +
 
 +
salt 'host' cmd.run 'update-locale'
 +
 
 +
From the salt minion:
 +
 
 +
salt-call cmd.run 'update-locale'
 +
 
 +
== Running a command on all minions ==
 +
 
 +
salt '*' cmd.run 'update-locale'
 +
 
 +
== Running a specific state file ==
 +
 
 +
From the salt master:
 +
 
 +
salt $MINION_ID state.sls $STATE_FILE
 +
 
 +
From the salt minion:
 +
 
 +
salt-call state.sls $STATE_FILE
 +
 
 +
== Listing active jobs ==
 +
 
 +
salt-run jobs.active
 +
 
 +
== Listing available grains ==
 +
 
 +
salt 'example' grains.items
 +
 
 +
== Listing available pillar ==
 +
 
 +
salt 'example' pillar.items
 +
 
 +
== Reporting a grain value ==
 +
 
 +
e.g. for the 'mem_total' grain:
 +
 
 +
salt '*' grains.item mem_total
 +
 
 +
== Passing a variable into a Jinja template from a salt state (SLS) ==
 +
 
 +
e.g.: to pass 'zabbix_deb_{pkg,url}' variables into the source.txt template:
 +
 
 +
<nowiki>/srv/zabbix/release/{{ zabbix_deb_pkg }}.txt:</nowiki>
 +
  file.managed:
 +
    - template: jinja
 +
    - user: root
 +
    - group: root
 +
    - mode: 644
 +
    - source: salt://file/srv/zabbix/release/source.txt
 +
    - require:
 +
      - file: /srv/zabbix/release
 +
    - default:
 +
      <nowiki>zabbix_deb_pkg: {{ zabbix_deb_pkg }}</nowiki>
 +
      <nowiki>zabbix_deb_url: {{ zabbix_deb_url }}</nowiki>
 +
 
 +
= KDE =
 +
 
 +
== Running user login script (X11/XOrg/XWindows) ==
 +
 
 +
A way to run user login scripts which works for KDE Plasma (and apparently other [https://en.wikipedia.org/wiki/X.Org_Server X.Org Server X Window System] environments) is to create a *.desktop file in ~/.config/autostart/. For example I have a ~/.config/autostart/ssh-add.desktop file with the following contents to register my SSH key in the SSH Agent:
 +
 
 +
  [Desktop Entry]
 +
  Type=Application
 +
  Name=ssh-add
 +
  Comment=Adds my private key to my session.
 
  Exec=/usr/bin/konsole -e 'ssh-add /home/$USER/.ssh/id_rsa'
 
  Exec=/usr/bin/konsole -e 'ssh-add /home/$USER/.ssh/id_rsa'
 +
 +
== Standard KDE shortcut key bindings ==
 +
 +
{|class="wikitable"
 +
! Name          !! Shortcut !! Command
 +
|-
 +
| Insert comment || F1      || xdotool type "$(date +%Y-%m-%d ) $USER - "
 +
|-
 +
| Insert sydtime || F4      || xdotool type "$(date +%Y-%m-%d-%H%M%S)"
 +
|-
 +
| Konsole        || Meta+T  || konsole
 +
|-
 +
| Dolphin        || Meta+E  || dolphin
 +
|-
 +
| Kate          || Ctrl+Shift+F12 || kate
 +
|-
 +
| KCalc          || Ctrl+Shift+F11 || kcalc
 +
|-
 +
| Firefox        || Ctrl+Shift+F10 || firefox
 +
|}
 +
 +
= VirtualBox =
 +
 +
== Mounting a VirtualBox VDI file ==
 +
 +
Note: instead of doing this consider booting with a live CD.
 +
 +
See [https://askubuntu.com/questions/19430/mount-a-virtualbox-drive-image-vdi/50290#50290 here]:
 +
 +
Install qemu if necessary:
 +
 +
# apt install qemu
 +
 +
Then you'll need to load the network block device module:
 +
 +
# rmmod nbd
 +
# modprobe nbd max_part=16
 +
 +
Attach the .vdi image to one of the nbd you just created:
 +
 +
# qemu-nbd -c /dev/nbd0 drive.vdi
 +
 +
Now you will get a /dev/nbd0 block device, along with several /dev/nbd0p* partition device nodes.
 +
 +
# mount /dev/nbd0p1 /mnt
 +
 +
Once you are done, unmount everything and disconnect the device:
 +
 +
# qemu-nbd -d /dev/nbd0
 +
 +
= Elasticsearch =
 +
 +
== Report on health of your Elasticsearch cluster ==
 +
 +
$ curl http://localhost:9200/_cluster/health?pretty
 +
 +
= Zabbix =
 +
 +
== Zabbix Agent on Mac OS X ==
 +
 +
Download and install agent.
 +
 +
Config file is here: /usr/local/etc/zabbix/zabbix_agentd.conf
 +
 +
Unload agent with:
 +
 +
# launchctl unload /Library/LaunchDaemons/com.zabbix.zabbix_agentd.plist
 +
 +
Load agent with:
 +
 +
# launchctl load /Library/LaunchDaemons/com.zabbix.zabbix_agentd.plist
 +
 +
To add a 'pki' group:
 +
 +
# dseditgroup -o create pki
 +
 +
To monitor syslog on Mac OS X:
 +
 +
# tail -f /var/log/system.log
 +
 +
== Installing Zabbix Agent from source on Mac OS X ==
 +
 +
Download sources from https://www.zabbix.com/download_sources
 +
 +
$ brew update
 +
$ brew install openssl
 +
$ brew install pcre
 +
jj5@condor:~/Desktop/zabbix-4.4.7$ ./configure --enable-agent --with-openssl=/usr/local/opt/openssl/
 +
jj5@condor:~/Desktop/zabbix-4.4.7$ sudo make install
 +
 +
= NetBeans =
 +
 +
== NetBeans shortcut keys ==
 +
 +
{|class="wikitable sortable"
 +
! Keys        !! Action
 +
|-
 +
| Ctrl+W      || Close active window
 +
|-
 +
| Alt+Shift+K  || Open in Terminal
 +
|-
 +
| Ctrl+U U    || Convert selected text to uppercase
 +
|-
 +
| Ctrl+U L    || Convert selected text to lowercase
 +
|}

Latest revision as of 04:18, 16 June 2020

Hi there, I'm John. I just wanted a page where I could document various Linux things that I bump into. This is that page. Thank you ProgClub. :)

Note: I have some other disorganised notes on UNIX, which include a few tips for MacOS. I also have some tips for OS X.

Note: the info on this page is probably Ubuntu (and Debian as an outside chance) specific, because I use Ubuntu pretty much everywhere these days.

You might also be interested in John's hacks.

Quick jump to: NetBeans.

Contents

System

Determining which Debian/Ubuntu release your are running

$ lsb_release -r

Or for more information:

$ lsb_release

Determining which Linux/Unix you are running

$ uname

Or,

$ uname -mrs

Or,

$ uname -a

Configuring system swappiness

Swappiness is a number between 0 and 100 that regulates how much the system uses the swap file. I like setting this value to 0 to keep my apps as responsive as possible. Create a file /etc/sysctl.d/local.conf and add this line:

vm.swappiness = 0

If you want to set the value for the current session only:

echo 0 > /proc/sys/vm/swappiness

Hardware information

For information about the hardware attached to your system, check out:

# lshw

And for CPUs:

# lscpu

And for PCI devices:

# lspci

And for DMI info:

# dmidecode

Note that the dmidecode command (above) will give you information about your system's motherboard. For motherboard info look for 'System Information' and/or 'Base Board Information'.

Or the grand daddy of them all:

# hwinfo

There's also inxi, e.g.:

$ inxi -b

System:    Host: tact Kernel: 4.9.0-4-amd64 x86_64 (64 bit) Desktop: KDE Plasma 5.8.6
           Distro: Debian GNU/Linux 9 (stretch)
Machine:   Device: desktop Mobo: ASUSTeK model: STRIX Z270F GAMING v: Rev 1.xx
           UEFI [Legacy]: American Megatrends v: 0906 date: 03/22/2017
CPU:       Quad core Intel Core i7-7700K (-HT-MCP-) speed/max: 799/4600 MHz
Graphics:  Card: Intel Device 5912
           Display Server: X.Org 1.19.2 drivers: modesetting (unloaded: fbdev,vesa)
           Resolution: 1920x1080@60.00hz, 1920x1080@60.00hz
           GLX Renderer: Mesa DRI Intel Kabylake GT2 GLX Version: 3.0 Mesa 13.0.6
Network:   Card: Intel Ethernet Connection (2) I219-V driver: e1000e
Drives:    HDD Total Size: 13026.6GB (42.0% used)
RAID:      Devices: 1: /dev/md1 2: /dev/md0
Info:      Processes: 355 Uptime: 11 days Memory: 21198.3/32043.3MB Client: Shell (bash) inxi: 2.3.5

Viewing syslog and other logs with KSystemLog

Run the 'KSystemLog' program under KDE for a handy log viewer GUI.

Power

Reporting on PowerShield DEFENDER UPS status

To see the status of the PowerShield DEFENDER systems on John's LAN:

$ upsc defender

E.g.:

jj5@orac:~$ upsc defender
Init SSL without certificate database
battery.charge: 100
battery.voltage: 27.40
battery.voltage.high: 26.00
battery.voltage.low: 20.80
battery.voltage.nominal: 24.0
device.type: ups
driver.name: blazer_usb
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.internal: 0.12
input.current.nominal: 5.0
input.frequency: 50.1
input.frequency.nominal: 50
input.voltage: 242.6
input.voltage.fault: 242.6
input.voltage.nominal: 240
output.voltage: 242.6
ups.beeper.status: disabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.load: 14
ups.productid: 5161
ups.status: OL
ups.type: offline / line interactive
ups.vendorid: 0665

Run commands on PowerShield DEFENDER UPS batteries

You can run "instant commands" using the upscmd command.

We use the 'beeper.toggle' instant command in our Salt Stack config to disable the beeper, see e.g.:

diligence:/srv/salt/conf/app/defender-1200.sls

To see "instant commands" supported by the PowerShield DEFENDER:

$ upscmd -l defender

E.g.:

jj5@orac:~$ upscmd -l defender
Instant commands supported on UPS [defender]:

beeper.toggle - Toggle the UPS beeper
load.off - Turn off the load immediately
load.on - Turn on the load immediately
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress
test.battery.start - Start a battery test
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery test

Environment

Configuring vim as your editor

Sometimes all you need is:

$ export EDITOR=/usr/bin/vim

Which works for svn, for example. Add it to your ~/.profile file to have it set for all login sessions.

Other times you need to run

# update-alternatives --config editor

And then select vim from the list. This is what you do to configure your visudo editor.

Configuring your locale

$ sudo /usr/sbin/locale-gen en_AU.UTF-8
$ sudo /usr/sbin/update-locale LANG=en_AU.UTF-8

User and group management

Adding a user

To add a new user on a linux system:

# useradd username
# passwd username

To have the home directory created from '/etc/skel' use the 'adduser' script instead:

# adduser username

Adding a user to a group

To add an existing user to an existing group:

# gpasswd -a username group

e.g. to add user 'jj5' to the 'sudo' group:

# gpasswd -a jj5 sudo

Alternatively you can use adduser, passing the username and group:

# adduser username group

e.g. to add user 'sclaughl' to the 'staff' group:

# adduser sclaughl staff

Disabling a user account

You can disable a user account with:

# passwd -l user

Note: that's a lower-case L, not a one.

Enabling a disabled user account

To can re-enable a locked user account with:

# passwd -u user

Finding which user you are logged in as

To determine which user you are running as enter the command:

$ whoami

Finding which groups you are a member of

To find which groups you are a member of:

$ groups

or

$ groups username

Where 'username' is the username of the user you are querying, e.g.:

$ groups jj5

Finding who else is logged in to the system

To see who else is logged in,

$ who

Running a command as a particular user

To run "svn update" as the user www-data:

$ sudo su -c "svn update" www-data

Reporting user and group info for the current user

$ id

Memory management

Checking available memory

To report memory statistics in megabytes:

$ free -m

Check for swap thrashing

Check your virtual memory status with vmstat:

$ vmstat

Report memory type

Report on RAM DIMMs:

# dmidecode --type 17

Report on RAM and CPU cache (including L1, L2, and L3):

# lshw -short -C memory

Or for more detail:

# lshw -C memory

Video/display management

Viewing EDID data for attached monitor

To view EDID data for an attached monitor (requires the edid-decode package):

$ cd /sys/class/drm
$ ls
$ cd card0-HDMI-A-1
$ edid-decode edid

Process management

Using 'top' for dynamic resource usage reporting

To run top:

$ top

See 15 Practical Linux Top Command Examples for some hints on usage.

To see usage for a specific user run e.g.:

$ top -u jj5

To see full command-line press 'c'.

When you're in 'top' you can:

  • press '1' (one) to toggle CPU aggregation
  • press < and > to change the sort column

Changing memory reporting in 'top'

To run top:

$ top

Press 'E' to switch between top memory units (KiB, MiB, GiB, etc.)

Press 'e' to switch between bottom memory units (KiB, MiB, GiB, etc.)

Press 'M' to sort by memory utilisation.

Press 'm' to switch between various display modes.

Showing full command-line in 'top'

To see the full command-line for processes run with -c:

$ top -c

Listing all processes currently running which were started in your current shell session

$ ps -fl

Killing specific processes

# ps aux | grep -e "this\|that" | grep -v grep | tr -s " " | cut -d " " -f 2 | xargs kill -9

Run a command for a specified time using timeout

$ timeout 3 ping jj5.net

Disk management

Creating a partition table

# parted /dev/xvdf
mktable msdos

Creating a partition

# parted /dev/xvdf
u MiB
mkpart primary 1 100%

Creating an ext4 file-system

# mkfs.ext4 /dev/xvdf1

Listing disk drives

# fdisk -l

(That's an L for "list")

Checking available disk space

$ df -h

Getting disk information

# lsblk

And

# cat /proc/partitions

Or the Grand Daddy of them all:

# lshw -class disk

(Requires the lshw package.)

Getting partition UUID and file-system type

# blkid

Checking for SSD vs magnetic disk

# cat /sys/block/sda/queue/rotational

Will be 0 for SSD and 1 for magnetic.

Monitoring a ZFS server

So some commands I run to keep an eye on my new ZFS servers:

# top
# iotop
# nethogs
# watch free -h
# watch slabtop -o
# slabtop
# watch cat /proc/meminfo
# perf top
# watch "df -h | grep -v -e tmpfs -e udev -e by-uuid"
# watch zpool iostat -v
# zpool iostat -v 2
# watch 'zpool list; echo; zfs list'
# watch zfs get compressratio -o all
# watch cat /proc/spl/kstat/zfs/arcstats

If you have a scrub or resilvering in progress you can report on progress with:

# watch zpool status -v

You can poke about in internals, e.g.:

# cat /proc/spl/kstat/zfs/arcstats
root@orac:/sys/module/zfs/parameters# tail *

You can report on property values with e.g.:

# zfs get all data

If you want to get funky:

# cd /tmp
# perf record -ag #(Ctrl+C after ~15 seconds)
# perf report --stdio

You can search for ZFS files like e.g. this:

root@orac:/# find / -name '*zfs*' -or -name '*zpool*'

You can report history of a zpool:

# zpool history $poolname

You can get a report on the dedup tables:

# zpool status -D $poolname

Or more detailed dedup table info:

# zdb -DDD $poolname

Note in the output see here for details, basically:

Abbr Description
LSIZE logical size (in memory)
PSIZE physical size
DSIZE size on disk
refcnt reference count

How to tell if zfs scrub is running

You can get the status from the "scan:" line from:

$ zpool status

Measure data throughput

Use the 'pv' command from the 'pv' package, e.g.:

# cat /dev/sda | pv | cat > /dev/null

Or for ZFS:

# zfs send data/example | pv | cat > /dev/null

Using Smartctl, Smartd and Hddtemp on Debian

For notes on using smartctl see Using Smartctl, Smartd and Hddtemp on Debian.

Report hard disk usage

So you might want to know how much data a process reads or writes to a hard disk. You can monitor process total disk utilisation with the 'iotop' command. Run 'iotop' and then press 'a' for --accumulated.

Report hard disk temperatures

E.g.

# hddtemp /dev/sd[a-e]

Burning an ISO image to USB on Mac

First insert your USB key and find the appropriate disk with:

# diskutil list

Then unmount it with:

# diskutil unmountDisk /dev/disk4

Then copy ISO image with 'dd':

# dd if=ubuntu-18.04.1-desktop-amd64.iso of=/dev/disk4

You can get dd to report progress by sending it the SIGINFO signal:

# kill -s info 12345

Listing all ext4 file systems

To see a list only of the mounted ext4 file systems:

# df -t ext4

Report hierarchical file system mount points and mount options

$ findmnt

Report the mount point for the current working directory

$ findmnt "$PWD"

Monitoring disk I/O

There's an app for that! iotop.

Using iotop, top for disks

# iotop -oPa

Monitor disk I/O for performance issues

# watch iostat

Or e.g.

# watch iostat -xd /dev/sd[abc]

Or use groupings like this command for 'tact':

$ iostat -g system nvme0n1 -g fast sda sdb -g data sdc sdd -d 2

Monitoring a system

Simple ZFS monitoring

# watch iostat
# iotop
# zpool iostat -v 5
# watch 'hddtemp /dev/sd[a-e]; echo; zpool list; echo; zfs list'
# nethogs
# top

Monitoring temperature

See temperature without third-party apps for:

$ cat /sys/class/thermal/thermal_zone*/temp

and:

$ paste <(cat /sys/class/thermal/thermal_zone*/type) <(cat /sys/class/thermal/thermal_zone*/temp) | column -s $'\t' -t | sed 's/\(.\)..$/.\1°C/'

Monitoring CPU temperature

$ watch sensors

Monitoring HDD temperature

For e.g. SATA drives sda to sdd:

# watch hddtemp /dev/sd[a-d]

ZFS

How can I determine the current size of the ARC in ZFS, and how does the ARC relate to free or cache memory?

See How can I determine the current size of the ARC in ZFS, and how does the ARC relate to free or cache memory?

$ cat /proc/spl/kstat/zfs/arcstats

Then:

c is the target size of the ARC in bytes
c_max is the maximum size of the ARC in bytes
size is the current size of the ARC in bytes

Stopping a ZFS scrub in progress

# zpool scrub -s $pool

e.g. for the 'data' pool:

# zpool scrub -s data

File management

Listing files by size

Use capital S for Size:

$ ls -S

Listing only directories

$ ls -l | egrep '^d'

Listing only files

$ ls -l | egrep -v '^d'

Listing hidden files

$ ls -al .[!.]*

Creating a symbolic link

$ ln -s /path/to/target link-name

Creating a hard-link

$ ln /path/to/target file-name

Changing the owner of a file

$ chown user:group <files>

E.g.

$ chown jj5:staff README
$ chown root:root *

To apply recursively into sub-directories use -R,

$ chown -R root:root /etc/*

Changing file permissions

Object codes
User Group Other
u g o
Permission codes
Read Write Exectue
r w x
4 2 1
Numeric codes
0 None
1 Execute
2 Write
3 Write, Execute
4 Read
5 Read, Execute
6 Read, Write
7 Read, Write, Execute

See Numeric Mode in Action.

$ chmod <user numeric code><group numeric code><other numeric code> <files>
$ chmod <object codes>+|-<permission codes> <files>

E.g.

$ chmod 600 my-private-file
$ chmod go-rwx my-private-file
$ chmod u+rw my-private-file
$ chmod +x my-script

Updating config files

If you get given a new config file called new.conf and you want to integrate it with your old config file old.conf then:

$ cp old.conf updated.conf
$ merge -A updated.conf new.conf old.conf

Then go through and edit updated.conf resolving all the merge errors, picking and choosing what to update and what to keep. When you're done copy updated.conf to old.conf so it becomes the new config file.

The merge program is a part of the RCS package. If you don't have it:

$ sudo apt-get install rcs

Listing open files

Use lsof to list open files. E.g.:

# lsof

See man lsof for options.

List permissions on a whole directory path

E.g.:

$ namei -om /home/jj5/workspace

Outputs:

f: /home/jj5/workspace/
 drwxr-xr-x root root /
 drwxr-xr-x root root home
 drwxr-xr-x jj5  jj5  jj5
 drwxr-xr-x jj5  jj5  workspace

Counting non-blank lines in a file

E.g.:

$ cat foo.c | sed '/^\s*$/d' | wc -l

Cloning one directory to another with rsync

E.g.:

rsync --acls --xattrs --stats --human-readable --recursive --del --force --times --links --hard-links --executability --numeric-ids --owner --group --perms --sparse --compress-level=0 /data/source/ hostname:/data/target/

Counting number of files in current directory and all subdirectories

$ ls -AlhR . | egrep '^-' | wc -l

Counting number of directories in current directory and all subdirectories

$ ls -AlhR . | egrep '^d' | wc -l

Getting the status of a 'dd' process

First figure out the 'dd' process number, with e.g. 'top' or 'ps aux | grep dd'

Then send the dd process the SIGINFO signal, which for dd process 40947 would be:

# kill -s info 40947

The dd process will report its status in the terminal its running in.

Transferring a large file via FAT32 file system

So the maximum file size supported by a FAT32 file system (commonly used on USB keys) is 4 GB per file. If you have a file larger than 4 GB you can split it into parts and then reassemble the parts once transferred:

$ split -b 4000m input.tgz input.tgz-parts-

Then copy the small files and reassemble:

$ cat input.tgz-parts-* > output.tgz

NFS

List NFS shares

To e.g. show NFS shares on 'love':

$ showmount -e love

Compression

How to use pigz with tar

See here:

$ tar cf - paths-to-archive | pigz --best -p 8 > archive.tgz

Note: don't use --best unless you're being stingy, running without it will be much faster.

Also from here:

Fast pack:

tar -I 'pigz --fast' -cf my.tar.gz whatver

Best pack:

tar -I 'pigz --best' -cf my.tar.gz whatver

Fast unpack:

tar -I pigz -xf my.tar.gz

Best compression with tar

From here:

export GZIP=-9
tar cvzf file.tar.gz /path/to/directory

or

env GZIP=-9 tar cvzf file.tar.gz /path/to/directory

Best parallel compression with pigz

$ pigz --best

Best parallel compression with xz

$ xz -9e -T 0

Reporting compression ratios with xz

e.g.

root@love:/data/image/archive# xz -l *
Strms  Blocks   Compressed Uncompressed  Ratio  Check   Filename
    1       3    372.2 MiB    442.3 MiB  0.841  CRC64   1999.txz
    1      29  5,281.3 MiB  5,542.5 MiB  0.953  CRC64   2001.txz
    1      11  1,364.3 MiB  2,084.3 MiB  0.655  CRC64   2002.txz
    1       9    568.5 MiB  1,660.2 MiB  0.342  CRC64   2003.txz
    1     639     66.8 GiB    119.6 GiB  0.558  CRC64   2004.txz
    1     313     12.7 GiB     58.6 GiB  0.217  CRC64   2005.txz
    1     414     35.0 GiB     77.4 GiB  0.452  CRC64   2006.txz
    1     485     44.5 GiB     90.9 GiB  0.490  CRC64   2007.txz
    1   1,690    150.0 GiB    316.8 GiB  0.473  CRC64   2008.txz
    1       3    457.9 MiB    526.0 MiB  0.871  CRC64   2009.txz
    1     168     27.3 GiB     31.4 GiB  0.868  CRC64   2010.txz
    1       4    477.1 MiB    702.8 MiB  0.679  CRC64   2011.txz
-------------------------------------------------------------------------------
   12   3,768    344.6 GiB    705.5 GiB  0.488  CRC64   12 files

Symbolic-link management

== Data used by sym-linked files:

This will de-reference the sym-links in the current directory and tell you how much data the files pointed to by the sym-links are using:

jj5@tact:/data/backup/unity/latest$ du -hD * | sort -h

File searching

Finding a file with a particular name

$ find -iname "*some-part-of-the-file-name*"

Will start searching from the current directory, so maybe

$ cd /

first. For a case-sensitive search:

$ find -name "*eXaCT CaSE*"

Finding a file with particular content

To search in /etc/ for a file with particular content:

$ grep -R "search-string" /etc/*

To search the current directory for *.cs files containing the word "Up":

$ find . -name '*.cs' -exec grep --color=auto -H Up {} \;

Finding a list of files with particular content

E.g. to find all the files with the word 'creativity':

$ grep -R creativity . | sed 's/:/ /' | awk '{ print $1 }' | sort | uniq

Using the locate command to find files

$ locate part-of-filename

E.g.

$ locate texvc

Updating locate command's database

# updatedb

Select a random line from a text file

$ shuf -n 1 input.txt

Extra context for grep

If you need to show extra lines before or after your grep results use -B NUM to set how many lines before the match and -A NUM for the number of lines after the match:

$ grep -B 3 -A 1 ...

Job control

Stopping a running process

Press Ctrl+Z to stop a running process.

Listing current jobs and their status

$ jobs

Resuming a stopped job in the backgroud

To resume a stopped process in the background

$ bg %1

where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').

Resuming a stopped job in the foreground

To resume a stopped process in the foreground

$ fg %1

where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').

Killing a stopped job

To kill a job

$ kill %1

where '1' is the job number reported by bash when you pressed Ctrl+Z (or ran 'jobs').

Periodically run a program and watch its output

$ watch /your/command

Debian/Ubuntu package management

Also see Where "is" it? on the Debian Wiki.

configuring debconf

# dpkg-reconfigure debconf 

Set priority to low to get asked detailed questions.

Showing list of installed packages

# dpkg --get-selections

Searching for installed package

# dpkg --get-selections | grep package-name

or

# aptitude search package-name

Showing which files are installed as part of a package

# dpkg -L package-name

Installing a package

# apt-get install package-name

Uninstalling a package

# apt-get remove package-name

Showing system architecture

$ dpkg --print-architecture

Showing which package a file belongs to

$ which echo
/bin/echo
$ dpkg -S /bin/echo
coreutils: /bin/echo
$ dpkg -l | grep coreutils
ii  coreutils                         6.10-6                   The GNU core utilities

Showing package information

$ apt-cache showpkg coreutils

Or for even more information:

$ apt-cache show coreutils

List all installed packages with package version info

dpkg-query -l

Reporting which version of a package is installed

$ dpkg -l | grep package-name

E.g.:

root@hope:~/letsencrypt# dpkg -l | grep augeas
ii  augeas-lenses                   0.7.0-1ubuntu1                 Set of lenses needed by libaugeas0 to parse 
ii  libaugeas0                      0.7.0-1ubuntu1                 The augeas configuration editing library and

Comprehensive upgrade

Try the following:

# apt-get update
# apt-get dist-upgrade
# apt-get autoremove
# apt-get remove $(deborphan)
# update-flashplugin-nonfree --install

Searching all available packages

$ apt-cache search . | sort -d | less

Networking

net-tools vs iproute2

The older 'net-tools' package has been replaced with 'iproute2' e.g. in stretch.

legacy net-tools commands iproute2 replacement commands
arp ip n (ip neighbor)
ifconfig ip a (ip addr), ip link, ip -s (ip -stats)
iptunnel ip tunnel
iwconfig iw
nameif ip link, ifrename
netstat ss, ip route (for netstat-r), ip -s link (for netstat -i), ip maddr (for netstat-g)
route ip r (ip route)

Restart networking

For servers:

# service networking restart

For desktops:

# service network-manager restart

Pinging with particular packet size

$ ping -M do -s <packet size in bytes> <host>

E.g.

$ ping -M do -s 1400 charity.progclub.org

Setting MSS for a particular IP address on a particular interface

# ip route add <host> dev <interface> advmss <packet size>

E.g.

# ip route add 10.0.0.1 dev eth0 advmss 1400

Dropping configured MMS for a particular IP address

# ip route flush <host>

E.g.

# ip route flush 10.0.0.1

Listing open ports and socket information

Including which process is listening on which port.

# netstat -tulpn

Or use the 'ss' command:

# ss -s
# ss -l
# ss -pl
# ss -o state established '( dport = :smtp or sport = :smtp )'

Listing open IPv4 connections

# lsof -Pnl +M -i4

You might need to install the lsof package:

# apt-get install lsof

Query for DNS MX record

$ nslookup
> server 127.0.0.1
> set q=mx
> mail.blackbrick.com

Query for DNS SOA record

$ dig @ns2.staticmagic.net -t SOA staticmagic.net

Using nmap to list open ports on remote host

To check the 1,000 most common ports:

# nmap server.example.com

Or for a specific port range (e.g. 101 to 102):

# nmap -p 101-102 server.example.com

Or for all ports (1 to 65,535):

# nmap -p- server.example.com

Network monitoring

See here for details. Basically:

  1. Overall bandwidth: nload, bmon, slurm, bwm-ng, cbm, speedometer, netload
  2. Overall bandwidth (batch style output): vnstat, ifstat, dstat, collectl
  3. Bandwidth per socket connection: iftop, iptraf, tcptrack, pktstat, netwatch, trafshow
  4. Bandwidth per process: nethogs

nload

You can watch network traffic in real-time with nload:

# nload -u M

Reporting network (NIC) speed

From here:

# dmesg | grep eth0
# mii-tool -v eth0
# ethtool eth0

Note: use ifconfig to get device name.

Path MTU discovery

To do a Path MTU Discovery, from the iputils-tracepath package:

# tracepath host.example.com

Listing available Ethernet devices

To see a list of NICs available on the host:

$ cat /proc/net/dev

Also

$ ip link

59 Linux Networking commands and scripts

See 59 Linux Networking commands and scripts.

Links

IPTables

Applying firewall rules

For configuration info see this article.

$ sudo vim /etc/iptables.test.rules
$ sudo /sbin/iptables -F
$ sudo /sbin/iptables-restore < /etc/iptables.test.rules
$ sudo iptables -L
$ sudo -s
# iptables-save > /etc/iptables.up.rules
# exit

ufw

Denying hosts with ufw

See denying hosts with ufw.

Bind9

Viewing Bind9 querylog

$ sudo rndc querylog
$ tail -f /var/log/syslog

IPSec

Disabling IPSec

# setkey -FP

OpenSSL

Debugging IMAPS with OpenSSL

# openssl s_client -connect localhost:993
> a1 LOGIN username@host password
> a2 LOGOUT

Debugging HTTPS with OpenSSL

$ openssl s_client -connect www.example.com:443
GET /example.html HTTP/1.1
host: www.example.com

Links

Pluggable Authentication Modules (PAM)

Links

SSH

Configuring SSH key login

On the client machine generate a key-pair (if necessary, check for existing ~/.ssh/id_rsa.pub):

$ ssh-keygen -t rsa

Copy the public key from the client to the server:

$ scp ~/.ssh/id_rsa.pub user@example.org:

Configure the authorized keys on the server:

$ ssh user@example.org
$ mkdir ~/.ssh
$ chmod go-w .ssh
$ cat ~/id_rsa.pub >> ~/.ssh/authorized_keys
$ chmod 600 ~/.ssh/authorized_keys
$ rm ~/id_rsa.pub

Tunneling over SSH

For example, connecting a remote MySQL server to the localhost:

$ ssh -L 3306:localhost:3306 jselliot@ssh.progsoc.org

If the machine you want to connect to is not the localhost of the machine you're ssh'ing to,

 $ ssh -L 3306:muspell.progsoc.uts.edu.au:3306 ssh.progsoc.uts.edu.au

The -L stanza is localport:remotehost:remoteport where localport is a port on your machine, forwarded to remoteport on remotehost.

Tunneling over SSH with PuTTY

See Connecting to the MySQL database remotely (via an SSH Tunnel)

  • run putty.exe
  • Connection -> SSH -> Tunnels
    • Port forwarding: source port to 3306
    • destination: 127.0.0.1:3306
    • check Local
    • click Add

Enabling verbose SSH logging

To see what's going on with your ssh connections,

$ ssh -v user@host

Or

$ ssh -vv user@host

Unlocking SSH key for session

jj5@orac:~/.config/autostart$ cat ssh-add.desktop 
[Desktop Entry]
Type=Application
Name=ssh-add
Comment=Adds my private key to my session.
Exec=/usr/bin/konsole -e 'ssh-add /home/$USER/.ssh/id_rsa'

Links

Standard IO

cat EOF

$ cat > output <<EOF
> text
> EOF
$ cat output
text

Script

Creating a session log with script

$ script -t 2> timing

The session log is in the file 'typescript' and the timing data is in 'timing'.

Replaying a scripted session

$ scriptreplay timing

Uses the default file 'typescript' and the 'timing' file as specified.

Screen

Creating a new screen or reconnecting to a detached screen

$ screen -R

Detaching a screen

$ screen -D

Reconnecting to screen

$ screen -D
$ screen -R

I have a script in ~/bin/reconnect like so,

#!/bin/bash
screen -D
screen -R

This will detach your last screen, and reconnect it on the current terminal.

Scrolling in screen

See How to scroll in GNU Screen. Basically press Ctrl+A ESC then use Page Up and Page Down. Press ESC again to exit copy mode. As usual you can use Ctrl+[ in place of ESC.

tmux

Live collaboration with tmux

User A:

tmux -S /tmp/collab
chmod 777 /tmp/collab

User B:

tmux -S /tmp/collab attach

Vim

First, why Vim?

Read Why, oh WHY, do those #?@! nutheads use vi?

Visual modes

Use 'v' for visual mode, 'V' for visual line mode and Ctrl+V for visual block mode.

Configuring spaces instead of tabs

I use two spaces instead of tabs. To configure, edit your .vimrc file:

$ vim ~/.vimrc

and include the following lines:

set tabstop=2
set shiftwidth=2
set expandtab

Configuring syntax highlighting

See here.

Use:

:syntax on

to turn on syntax highlighting.

Use:

:syntax off

to turn off syntax highlighting.

To always use syntax highlighting:

$ vim ~/.vimrc

and add:

syntax on

To get a list of supported colour schemes open vim and type:

:colorscheme[space][Ctrl+D]

To always use a particular colorscheme edit ~/.vimrc and add (for example):

colorscheme desert

Inserting a TAB character when expandtab is on

The problem here is that you have configured vim to insert spaces, but for a particular file (e.g. a Makefile) you need to insert a character.

Press Ctrl+V TAB to insert a literal tab character.

Or you can disable tab expansion altogether with:

:set expandtab!

Changing 2 space indent to 4 space indent (e.g. for python files)

:%s/^\s*/&&/g

For more information see here.

Recording and replaying a macro

To record a macro press 'q' and then a number between 1 and 9. E.g. press "q1". The macro is now recording. When you've finished issuing your commands press 'q' again to finish recording. To replay a macro press '@' followed by the number of the macro. That is, if you pressed "q1" to record the macro, press "@1" to replay the macro. To replay the last macro again press "@@".

Deleting to end of line

d$

Deleting to beginning of line

d^

Finding text

To search forward for "text":

/text

To search backward for "text":

?text

To repeat the last search in a forward direction press 'n', or to search again backwards press 'N'.

Finding and replacing text

To replace the first instance of "search" on the current line with "destroy":

:s/search/destroy/

To replace all instances of "search" on the current line with "destroy":

:s/search/destroy/g

To replace all instances of "search" on lines 13 to 37 with "destroy":

:13,37 s/search/destroy/g

To replace all instances of "search" in the entire file with "destroy":

:%s/search/destroy/g

Changing DOS/Windows line-endings (CRLF) to Unix line-endings

To set the line-ending to Unix line endings run the command:

:setlocal ff=unix

More information on managing file formats available here.

Disabling auto-indent etc. to paste from clipboard

To disable smart indenting when you're going to paste in text:

:set paste

To turn it off again:

:set nopaste

There's more info in this article: Toggle auto-indenting for code paste

Positioning windows

Use -o for horizontal split, e.g.:

vim -o a.txt b.txt

Use -O for vertical split, e.g.:

vim -o a.txt b.txt

Use ^W to navigate windows then use directional keys h, j, k, l, etc.

Use ^W and < or > to resize windows.

To indent a block of text in Vim

Use the > command. E.g. to indent five lines:

5 > >

Press . (dot) to keep indenting.

Or inside a block (e.g. curly brace, HTML/XML element, etc.) you can put your cursor in the element on on the curly brace and then:

> %

See here for more.

Open a file in a new window/tab

To open a file on the left hand side:

:vert new filename.ext

Note: ':vnew filename.ext' and ':vsp filename.ext' also work.

To open a file at the top:

:new filename.ext

See here for more.

Explore files in Vim

Enter:

:Explore

Switch between Vim tabs

Use gt and gT.

Switch between Vim windows

To toggle between open windows use:

Ctrl+W W

To move in a direction use:

Ctrl+W h/j/k/l

See here for more.

Insert block comment in Vim

See here for line-commenting.

So it's:

  1. Ctrl+V (Note: not Shift+V!)
  2. Up/Down to select rows
  3. Shift+I
  4. Enter your text, e.g. '#' or '//'
  5. Ctrl+[ (or 'Esc')

Navigate to matching tag

To navigate to the matching beginning or end tag use '%'.

You can also use e.g. '[{' to match the previous '{', or e.g. '])' to match the next ')'.

Auto-format HTML tags

Stolen from here.

  1. first join all the lines - ggVGgJ
  2. Now break tags to new lines - :%s/>\s*</>\r</g
  3. Now set filetype - :set ft=html (you can do this before too)
  4. Now Indent - ggVG=

Links

Create PDF from text using Vim

Generate PDF from input.txt with:

$ vim input.txt -c "hardcopy > doc.ps | q" && ps2pdf doc.ps

Examine output with:

$ okular doc.pdf

Write

Talking to other users on the system

write is a unix command for talking to other users on the system. To use write:

1. SSH to <username>@<hostname> and login with your username and password.

2. Issue the following command to find out who is logged onto the system:

$ who

3. Issue the following command to talk to a specific user:

$ write <username>

4. Enter the message you'd like to send the user, followed by Ctrl+C to send. Press Ctrl+D to cancel.

Date

Reporting the time on the server

$ date

Reporting UTC time

$ date --utc

Getting the date in yyyy-MM-dd-hhmmss format

$ date="`date +%F-%H%M%S`"

Getting the year in four digits

$ year="`date +%Y`"

Getting the month in two digits

$ month="`date +%m`"

Getting the day of the month in two digits

$ day="`date +%d`"

Getting yesterday's date

$ date --date='1 day ago' +%Y-%m-%d

Converting Unix time (seconds since epoch)

For timestamp '1501370200':

$ date -d @1501370200 +%F-%H%M%S

Running timedatectl from systemd

There's a new command bundled with systmed:

# timedatectl

It reports on (and controls) how the system time is configured.

MySQL

Run mysql without authentication/authorisation

# service mysql stop
# mysqld_safe --skip-grant-tables &

Then you can connect without a password, e.g.:

# mysql -u root mysql

To stop the unauthenticated service:

# mysqladmin shutdown

Then restart a normal service:

# service mysql start

Logging all database queries

# vim /etc/mysql/my.cnf

In the [mysqld] section add:

log=/tmp/mysql.log

Then:

# service mysql restart

Watch the log with:

# tail -f /tmp/mysql.log

Dumping a MySQL database

You can dump the database into a file using:

$ mysqldump -h hostname -u user --password=password databasename > filename

Loading a MySQL database from a dump file

You can create a database using:

$ echo create database databasename | mysql -h hostname -u user -p

You can restore a database using:

$ mysql -h hostname -u user --password=password databasename < filename

Creating a MySQL user

# mysql -h localhost -u root --password=<password>
mysql> create user 'username'@'localhost' identified by '<password>';

Granting all MySQL user permissions

# mysql -h localhost -u root --password=<password>
mysql> grant all privileges on dbname.* to user@host;

Select domain name from email address

SELECT SUBSTR( email, INSTR( email, '@' ) + 1 )

Check if MySQL connection is encrypted with TLS/SSL

Check the SSL version in use:

show status like 'Ssl_version';

Or check the cipher in use:

show status like 'Ssl_cipher';

Apache

Reporting loaded Apache modules

# apache2ctl -M

Maintaining .htaccess passwords

To add or modify the password for a user:

$ htpasswd /etc/apache2/passwd username

Configuring PHP session timeout in .htaccess

For a session timeout of 9 hours:

php_value session.cookie_lifetime 32400
php_value session.gc_maxlifetime 32400

Disabling PHP magic quotes in .htaccess

php_flag magic_quotes_gpc Off

Requiring HTTP Auth in .htaccess

AuthType Basic
AuthName "Speak Friend And Enter"
AuthUserFile /home/jj5/.htpasswd
Require valid-user

Restarting Apache

The hard way

$ sudo /etc/init.d/apache2 restart

The graceful way (avoids dropping active connections)

$ sudo apache2ctl graceful

Allowing directory browsing

To show directory index pages, in the apache config file:

<Directory /var/www/data>
  Options Indexes
</Directory>

C

Locating memset function

The memset function is in <string.h> as described in this article Using memset(), memcpy(), and memmove() in C

Links

PHP

Including a file relative to the including file

require_once( dirname( __FILE__ ) . '/relative/path/to.php' );

Enabling error reporting

error_reporting( E_ALL | E_STRICT );
ini_set( 'display_errors', 'On' );

Setting an error handler

set_error_handler( "error_handler", E_ALL | E_STRICT );
function error_handler( $error_code, $error_message, $error_file, $error_line, $error_context ) {
  // ...
}

Disable HTML content in var_dump

ini_set( 'html_errors', 'off' );

Report PHP modules

$ php -m

PHP Security Best Practices For Sys Admins

See Linux 25 PHP Security Best Practices For Sys Admins.

BASH scripting

For a primer on bash scripting see TFM: Erotic Fantasy: /bin/sh Programming.

Telling a script to run in bash

The first line of the file should be:

#!/bin/bash

Checking if a command-line argument was passed in

if [ -n "$1" ]; then
  echo "Missing parameter 1.";
  exit 1;
fi

Checking if a command-line argument was not passed in

if [ "$1" = "" ]; then
  echo "Missing parameter 1.";
  exit 1;
fi

Or:

if [ -z "$1" ]; then
  echo "Missing parameter 1.";
  exit 1;
fi

Checking command exit status

cd /my/path
if [ "$?" -ne "0" ]; then
  echo "Cannot change dir.";
  exit 1;
fi

Checking if a file does/doesn't exist

Check if file exists:

if [ -f "/my/file" ]; then
  cat /my/file
fi

Check if file doesn't exist:

if [ ! -f "/my/file" ]; then
  touch /my/file
fi

Checking if a directory does/doesn't exist

Check if directory exists:

if [ -d "/my/dir" ]; then
  rmdir /my/dir
fi

Check if directory doesn't exist:

if [ ! -d "/my/dir" ]; then
  mkdir /my/dir
fi

Deleting old backups

To keep only the latest five backups:

find . -maxdepth 1 -type f -printf '%T@ %p\0' | sort -r -z -n | awk 'BEGIN { RS="\0"; ORS="\0"; FS="" } NR > 5 { sub("^[0-9]*(.[0-9]*)? ", ""); print }' | xargs -0 rm -f

This script stolen from stackoverflow.

Requires GNU find for -printf, GNU sort for -z, GNU awk for "\0" and GNU xargs for -0, but handles files with embedded newlines or spaces.

Changing into the script's directory

cd "`dirname $0`"

Getting the absolute path of a relative path

readlink -f ./some/path

Creating a temp directory

dir=`mktemp -d` && cd $dir

Reading secret input from stdin

You can read a secret, such as a password, like this:

echo -n "Enter passphrase: "
stty -echo
read passphrase;
stty echo
echo ""

After running the above the secret will be in the $passphrase environment variable.

String replacements in bash

See the string manipulation doco. Basically, to replace first occurrence:

result=${var/find/replace}

To replace all occurrences:

result=${var//find/replace}

A practical example, get an ISO date and turn it into a path:

date="$(date +%Y-%m-%d)"
work_dir=${date//-//}

Sending a HEREDOC to a file

cat << EOF > /tmp/yourfilehere
These contents will be written to the file.
        This line is indented.
EOF

Bash case/switch statement

See using case statements, e.g.:

case $space in
[1-6]*)
  Message="All is quiet."
  ;;
[7-8]*)
  Message="Start thinking about cleaning out some stuff.  There's a partition that is $space % full."
  ;;
9[1-8])
  Message="Better hurry with that new disk...  One partition is $space % full."
  ;;
99)
  Message="I'm drowning here!  There's a partition at $space %!"
  ;;
*)
  Message="I seem to be running with an nonexistent amount of disk space..."
  ;;
esac

Using dotglob shopt to match dot-files

To enable dot-file matching in globs, set the dotglob shell option:

$ shopt -s dotglob

Stopping a script from running if it previously exited due to error

persistentDataDir=/var/lib/something
alarm() {
  touch $persistentDataDir/alarm
}
trap alarm ERR
[ -f $persistentDataDir/alarm ] && exit 1

Make sure only one instance of a script is running at a time

ephemeralDataDir=/var/run/something
unlock() {
  rmdir $ephemeralDataDir/lock
}
mkdir $ephemeralDataDir/lock || exit 1;
trap unlock EXIT

BASH programming advice

See Anybody can write good bash (with a little effort).

Run a command using arguments that come from an array

See here:

#!/bin/bash
tabs=("first tab" "second tab")
args=()
for t in "${tabs[@]}" ; do 
  args+=(-t "$t")
done
app "${args[@]}"

Display a CSV in columnar or tabular format

$ column -t -s , data.csv

Sed

Find and replace with sed

To update the current file use '-i'. E.g.:

sed -i 's/search-text/replace-text/' file

Awk

Listing IP addresses in an Apache web log

awk '/GET \/path\/for\/url/ { print $1 }' /var/log/apache2/access.log | sort | uniq

Printing space-separated field

echo 'no no yes no' | awk '{print $3}'

Printing delimited field

echo 'no:no:yes:no' | awk -F ':' '{print $3}'

Subversion

Setting svn:externals from the command-line

See here.

To set an svn:externals from the command-line:

svn propset svn:externals 'rdfind-php https://www.progclub.org/svn/pcrepo/rdfind.php/branches/0.1' .
svn ci -m 'Adding svn:externals for rdfind-php...'
svn up

Or to use a file:

svn propset svn:externals -F svn.externals .

Setting svn:ignore from the command line

See here.

$ svn propset svn:ignore [file|folder] [path]

Or use a file and apply recursively:

$ svn propset svn:ignore -RF ./svn-ignore-list.txt .

Git

Showing status of working copy

git status

Showing repo history

git log

Showing remote repositories (including 'origin')

git remote -v

Handy git aliases

Save these to your ~/.gitconfig file.

For a nicer view of history than standard 'git log' -- colourful, one-line-per commit, etc:

 graph = !git log --all --graph --color --abbrev-commit --pretty=oneline

To show only the files that have changed, rather than the full line-by-line content:

 dif   = !git diff --name-status

Show git remote URL

git config --get remote.origin.url

IRC

Instructing ChanServ to op an admin

/msg ChanServ op #channel user

E.g.

/msg ChanServ op #gnurc jj5

Sub 'op' for 'deop' to remove op privilege.

C++

C++ books

Books I want

Books I own

Books I'm not reading

Books I've read

C++ blogs/articles

C++ performance tips

  • ++c can be faster than c++.
  • use const for everything that you possibly can.
  • use 'inline' when you need to define a function in a header. Typically only do that if it's small and the increase in code size from inlining is worth the cost to avoid the cost of a function call. For anything except trivially small functions you'll probably need to profile to know if it's worth it.
  • don't use registers.
  • const rarely affects performance.
  • debunking a number of C++ myths that won't die.
  • std::sort<> is typically faster than qsort() because it can avoid indirection at runtime.
  • if you've got parallelisation going on, you may be able to just replace a std::for_each with a parallel equivalent.
  • read about performance cost of RTTI (Run Time Type Information) and how to disable it
  • don't use dynamic_cast because it is slow (typeid is faster but still relies on RTTI)
  • prefer unique_ptr to shared_ptr when possible. unique_ptr has less overhead.
  • Which is better, static or dynamic linking?
  • Integer vs Floating-Point performance

systemd

systemd is an init system used in most Linux distributions to bootstrap the user space and manage all processes subsequently.

Following a service log

e.g. for bind9:

# journalctl -f -u bind9

or for everything:

# journalctl -f

System status

To see spawned services hierarchy:

# systemctl status

Or for a specific service e.g.:

# systemctl status networking

SaltStack

Running a command on specified minions

From the salt master:

salt 'host' cmd.run 'update-locale'

From the salt minion:

salt-call cmd.run 'update-locale'

Running a command on all minions

salt '*' cmd.run 'update-locale'

Running a specific state file

From the salt master:

salt $MINION_ID state.sls $STATE_FILE

From the salt minion:

salt-call state.sls $STATE_FILE

Listing active jobs

salt-run jobs.active

Listing available grains

salt 'example' grains.items

Listing available pillar

salt 'example' pillar.items

Reporting a grain value

e.g. for the 'mem_total' grain:

salt '*' grains.item mem_total

Passing a variable into a Jinja template from a salt state (SLS)

e.g.: to pass 'zabbix_deb_{pkg,url}' variables into the source.txt template:

/srv/zabbix/release/{{ zabbix_deb_pkg }}.txt:
  file.managed:
    - template: jinja
    - user: root
    - group: root
    - mode: 644
    - source: salt://file/srv/zabbix/release/source.txt
    - require:
      - file: /srv/zabbix/release
    - default:
      zabbix_deb_pkg: {{ zabbix_deb_pkg }}
      zabbix_deb_url: {{ zabbix_deb_url }}

KDE

Running user login script (X11/XOrg/XWindows)

A way to run user login scripts which works for KDE Plasma (and apparently other X.Org Server X Window System environments) is to create a *.desktop file in ~/.config/autostart/. For example I have a ~/.config/autostart/ssh-add.desktop file with the following contents to register my SSH key in the SSH Agent:

[Desktop Entry]
Type=Application
Name=ssh-add
Comment=Adds my private key to my session.
Exec=/usr/bin/konsole -e 'ssh-add /home/$USER/.ssh/id_rsa'

Standard KDE shortcut key bindings

Name Shortcut Command
Insert comment F1 xdotool type "$(date +%Y-%m-%d ) $USER - "
Insert sydtime F4 xdotool type "$(date +%Y-%m-%d-%H%M%S)"
Konsole Meta+T konsole
Dolphin Meta+E dolphin
Kate Ctrl+Shift+F12 kate
KCalc Ctrl+Shift+F11 kcalc
Firefox Ctrl+Shift+F10 firefox

VirtualBox

Mounting a VirtualBox VDI file

Note: instead of doing this consider booting with a live CD.

See here:

Install qemu if necessary:

# apt install qemu

Then you'll need to load the network block device module:

# rmmod nbd
# modprobe nbd max_part=16

Attach the .vdi image to one of the nbd you just created:

# qemu-nbd -c /dev/nbd0 drive.vdi

Now you will get a /dev/nbd0 block device, along with several /dev/nbd0p* partition device nodes.

# mount /dev/nbd0p1 /mnt

Once you are done, unmount everything and disconnect the device:

# qemu-nbd -d /dev/nbd0

Elasticsearch

Report on health of your Elasticsearch cluster

$ curl http://localhost:9200/_cluster/health?pretty

Zabbix

Zabbix Agent on Mac OS X

Download and install agent.

Config file is here: /usr/local/etc/zabbix/zabbix_agentd.conf

Unload agent with:

# launchctl unload /Library/LaunchDaemons/com.zabbix.zabbix_agentd.plist

Load agent with:

# launchctl load /Library/LaunchDaemons/com.zabbix.zabbix_agentd.plist

To add a 'pki' group:

# dseditgroup -o create pki

To monitor syslog on Mac OS X:

# tail -f /var/log/system.log

Installing Zabbix Agent from source on Mac OS X

Download sources from https://www.zabbix.com/download_sources

$ brew update
$ brew install openssl
$ brew install pcre
jj5@condor:~/Desktop/zabbix-4.4.7$ ./configure --enable-agent --with-openssl=/usr/local/opt/openssl/
jj5@condor:~/Desktop/zabbix-4.4.7$ sudo make install

NetBeans

NetBeans shortcut keys

Keys Action
Ctrl+W Close active window
Alt+Shift+K Open in Terminal
Ctrl+U U Convert selected text to uppercase
Ctrl+U L Convert selected text to lowercase